1. Documentation

Managing Networking

Overview

This topic describes the management of the overall cluster network, including project isolation and outbound traffic control.

Pod-level networking features, such as per-pod bandwidth limits, are discussed in Managing Pods.

Managing Pod Networks

When your cluster is configured to use the ovs-multitenant SDN plug-in, you can manage the separate pod overlay networks for projects using the administrator CLI. See the Configuring the SDN section for plug-in configuration steps, if necessary.

Joining Project Networks

To join projects to an existing project network:

$ oadm pod-network join-projects --to=<project1> <project2> <project3>

In the above example, all the pods and services in <project2> and <project3> can now access any pods and services in <project1> and vice versa. Services can be accessed either by IP or fully-qualified DNS name (<service>.<pod_namespace>.svc.cluster.local). For example, to access a service named db in a project myproject, use db.myproject.svc.cluster.local.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

Isolating Project Networks

To isolate the project network in the cluster and vice versa, run:

$ oadm pod-network isolate-projects <project1> <project2>

In the above example, all of the pods and services in <project1> and <project2> can not access any pods and services from other non-global projects in the cluster and vice versa.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

Making Project Networks Global

To allow projects to access all pods and services in the cluster and vice versa:

$ oadm pod-network make-projects-global <project1> <project2>

In the above example, all the pods and services in <project1> and <project2> can now access any pods and services in the cluster and vice versa.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

Controlling Egress Traffic

As an OpenShift Origin cluster administrator, you can control egress traffic in two ways:

Firewall

Using an egress firewall allows you to enforce the acceptable outbound traffic policies, so that specific endpoints or IP ranges (subnets) are the only acceptable targets for the dynamic endpoints (pods within OpenShift Origin) to talk to.

Router

Using an egress router allows you to create identifiable services to send traffic to a specific destination, ensuring an external destination treats traffic as though it were coming from a known source. This helps with security, because it allows you to secure an external database so that only specific pods in a namespace can talk to a service (the egress router), which proxies the traffic to your database.

Using an Egress Firewall to Limit Access to External Resources

As an OpenShift Origin cluster administrator, you can use egress firewall policy to limit the external addresses that some or all pods can access from within the cluster, so that:

  • A pod can only talk to internal hosts, and cannot initiate connections to the public Internet.

    Or,

  • A pod can only talk to the public Internet, and cannot initiate connections to internal hosts (outside the cluster).

    Or,

  • A pod cannot reach specified internal subnets/hosts that it should have no reason to contact.

You can configure projects to have different egress policies. For example, allowing <project A> access to a specified IP range, but denying the same access to <project B>. Or restrict application developers from updating from (Python) pip mirrors, and forcing updates to only come from desired sources.

You must have the ovs-multitenant plug-in enabled in order to limit pod access via egress policy.

Project administrators can neither create EgressNetworkPolicy objects, nor edit the ones you create in their project. There are also several other restrictions on where EgressNetworkPolicy can be created:

  • The default project (and any other project that has been made global via oadm pod-network make-projects-global) cannot have egress policy.

  • If you merge two projects together (via oadm pod-network join-projects), then you cannot use egress policy in any of the joined projects.

  • No project may have more than one egress policy object.

Violating any of these restrictions results in broken egress policy for the project, and may cause all external network traffic to be dropped.

Use the oc command or the REST API to configure egress policy. You can use oc [create|replace|delete] to manipulate EgressNetworkPolicy objects. The api/swagger-spec/oapi-v1.json file has API-level details on how the objects actually work.

To configure egress policy:

  1. Navigate to the project you want to affect.

  2. Create a JSON file with the desired policy details. For example:

    {
    "kind": "EgressNetworkPolicy",
    "apiVersion": "v1",
    "metadata": {
        "name": "default"
    },
    "spec": {
        "egress": [
            {
                "type": "Allow",
                "to": {
                    "cidrSelector": "1.2.3.0/24"
                }
            },
            {
                "type": "Allow",
                "to": {
                    "dnsName": "www.foo.com"
                }
            },
            {
                "type": "Deny",
                "to": {
                    "cidrSelector": "0.0.0.0/0"
                }
            }
        ]
    }
}

    When the example above is added to a project, it allows traffic to IP range 1.2.3.0/24 and domain name www.foo.com, but denies access to all other external IP addresses. Traffic to other pods is not affected because the policy only applies to external traffic.

    The rules in an EgressNetworkPolicy are checked in order, and the first one that matches takes effect. If the three rules in the above example were reversed, then traffic would not be allowed to 1.2.3.0/24 and www.foo.com because the 0.0.0.0/0 rule would be checked first, and it would match and deny all traffic.

    Domain name updates are polled based on the TTL (time to live) value of the domain of the local non-authoritative server, or 30 minutes if the TTL is unable to be fetched. The pod should also resolve the domain from the same local non-authoritative server when necessary, otherwise the IP addresses for the domain perceived by the egress network policy controller and the pod will be different, and the egress network policy may not be enforced as expected. In the above example, suppose www.foo.com resolved to 10.11.12.13 and has a DNS TTL of one minute, but was later changed to 20.21.22.23. OpenShift Origin will then take up to one minute to adapt to these changes.

  3. Use the JSON file to create an EgressNetworkPolicy object:

    # oc create -f <policy>.json

Using an Egress Router to Allow External Resources to Recognize Pod Traffic

The OpenShift Origin egress router runs a service that redirects traffic to a specified remote server, using a private source IP address that is not used for anything else. The service allows pods to talk to servers that are set up to only allow access from whitelisted IP addresses.

The egress router is not intended for every outgoing connection. Creating large numbers of egress routers can push the limits of your network hardware. For example, creating an egress router for every project or application could exceed the number of local MAC addresses that the network interface can handle before falling back to filtering MAC addresses in software.

Important Deployment Considerations

The Egress router adds a second IP address and MAC address to the node’s primary network interface. If you are not running OpenShift Origin on bare metal, you may need to configure your hypervisor or cloud provider to allow the additional address.

Red Hat OpenStack Platform

If you are deploying OpenShift Origin on Red Hat OpenStack Platform, you need to whitelist the IP and MAC addresses on your Openstack environment, otherwise communication will fail:

neutron port-update $neutron_port_uuid \
  --allowed_address_pairs list=true \
  type=dict mac_address=<mac_address>,ip_address=<ip_address>

Red Hat Enterprise Virtualization

If you are using Red Hat Enterprise Virtualization, you should set EnableMACAntiSpoofingFilterRules to false.

VMware vSphere

If you are using VMware vSphere, follow VMware’s Securing Virtual Switch Ports and Forged Transmissions guidance.

Deploying an Egress Router Pod

  1. Create a pod configuration using the following:

    Example 1. Example Pod Definition for an Egress Router
    apiVersion: v1
kind: Pod
metadata:
  name: egress-1
  labels:
    name: egress-1
  annotations:
    pod.network.openshift.io/assign-macvlan: "true" (1)
spec:
  containers:
  - name: egress-router
    image: openshift/origin-egress-router
    securityContext:
      privileged: true
    env:
    - name: EGRESS_SOURCE (2)
      value: 192.168.12.99
    - name: EGRESS_GATEWAY (3)
      value: 192.168.12.1
    - name: EGRESS_DESTINATION (4)
      value: 203.0.113.25
  nodeSelector:
    site: springfield-1 (5)
    1 The pod.network.openshift.io/assign-macvlan annotation creates a Macvlan network interface on the primary network interface, and then moves it into the pod’s network name space before starting the egress-router container. Preserve the the quotation marks around "true". Omitting them will result in errors.
    2 An IP address from the physical network that the node itself is on and is reserved by the cluster administrator for use by this pod.
    3 Same value as the default gateway used by the node itself.
    4 The external server that to direct traffic to. Using this example, connections to the pod are redirected to 203.0.113.25, with a source IP address of 192.168.12.99.
    5 The pod will only be deployed to nodes with the label site=springfield-1.

  2. Create the pod using the above definition:

    $ oc create -f <pod_name>.json

    To check to see if the pod has been created:

    oc get pod <pod_name>

  3. Ensure other pods can find the pod’s IP address by creating a service to point to the egress router:

    apiVersion: v1
kind: Service
metadata:
  name: egress-1
spec:
  ports:
  - name: http
    port: 80
  - name: https
    port: 443
  type: ClusterIP
  selector:
    name: egress-1

    Your pods can now connect to this service. Their connections are redirected to the corresponding ports on the external server, using the reserved egress IP address.

The pod contains a single container, using the openshift/origin-egress-router image, and that container is run privileged so that it can configure the Macvlan interface and set up iptables rules.

The environment variables tell the egress-router image what addresses to use; it will configure the Macvlan interface to use EGRESS_SOURCE as its IP address, with EGRESS_GATEWAY as its gateway.

NAT rules are set up so that connections to any TCP or UDP port on the pod’s cluster IP address are redirected to the same port on EGRESS_DESTINATION.

If only some of the nodes in your cluster are capable of claiming the specified source IP address and using the specified gateway, you can specify a nodeName or nodeSelector indicating which nodes are acceptable.

Enabling Failover for Egress Router Pods

Using a replication controller, you can ensure that there is always one copy of the egress router pod in order to prevent downtime.

  1. Create a replication controller configuration file using the following:

    apiVersion: v1
kind: ReplicationController
metadata:
  name: egress-demo-controller
spec:
  replicas: 1 (1)
  selector:
    name: egress-demo
  template:
    metadata:
      name: egress-demo
      labels:
        name: egress-demo
      annotations:
        pod.network.openshift.io/assign-macvlan: "true"
    spec:
      containers:
      - name: egress-demo-container
        image: openshift/origin-egress-router
        env:
        - name: EGRESS_SOURCE
          value: 192.168.12.99
        - name: EGRESS_GATEWAY
          value: 192.168.12.1
        - name: EGRESS_DESTINATION
          value: 203.0.113.25
        securityContext:
          privileged: true
      nodeSelector:
        site: springfield-1
    1 Ensure replicas is set to 1, because only one pod can be using a given EGRESS_SOURCE value at any time. This means that only a single copy of the router will be running, on a node with the label site=springfield-1.

  2. Create the pod using the definition:

    $ oc create -f <replication_controller>.json

  3. To verify, check to see if the replication controller pod has been created:

    oc describe rc <replication_controller>

Enabling Multicast

Enabling multicast networking is a Technology Preview feature only.

Multicast traffic between OpenShift Origin pods is disabled by default. You can enable Multicast on a per-project basis by setting an annotation on the project’s corresponding netnamespace object:

# oc annotate netnamespace <namespace> \
    netnamespace.network.openshift.io/multicast-enabled=true

Disable multicast by removing the annotation:

# oc annotate netnamespace <namespace> \
    netnamespace.network.openshift.io/multicast-enabled-

If you have joined networks together, you will need to enable Multicast in each projects' netnamespace in order for it to take effect in any of the projects. To enable Multicast in the default project, you must also enable it in all other projects that have been made global.

Multicast global projects are not "global", but instead communicate with only other global projects via Multicast, not with all projects in the cluster, as is the case with unicast.

Enabling NetworkPolicy

Enabling the Kubernetes NetworkPolicy is a Technology Preview feature only.

Kubernetes NetworkPolicy is not currently fully supported by OpenShift Origin, and the ovs-subnet and ovs-multitenant plug-ins ignore NetworkPolicy objects. However, a Technology Preview of NetworkPolicy support is available by using the ovs-networkpolicy plug-in.

In a cluster configured to use the ovs-networkpolicy plug-in, network isolation is controlled entirely by NetworkPolicy objects and the associated Namespace annotation. In particular, by default, all projects are able to access pods in all other projects. The project to be isolated must first be configured to opt in to isolation by setting the proper annotation on its Namespace object, and then creating NetworkPolicy objects indicating the incoming connections to be allowed.