diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml index eacafe3..7c6638b 100644 --- a/Documentation/DocBook/media/v4l/driver.xml +++ b/Documentation/DocBook/media/v4l/driver.xml @@ -116,7 +116,7 @@ my_suspend (struct pci_dev * pci_dev, return 0; /* a negative value on error, 0 on success. */ } -static void __devexit +static void my_remove (struct pci_dev * pci_dev) { my_device *my = pci_get_drvdata (pci_dev); @@ -124,7 +124,7 @@ my_remove (struct pci_dev * pci_dev) /* Describe me. */ } -static int __devinit +static int my_probe (struct pci_dev * pci_dev, const struct pci_device_id * pci_id) { @@ -157,7 +157,7 @@ my_pci_driver = { .id_table = my_pci_device_ids, .probe = my_probe, - .remove = __devexit_p (my_remove), + .remove = my_remove, /* Power management functions. */ .suspend = my_suspend, diff --git a/Documentation/PCI/pci-iov-howto.txt b/Documentation/PCI/pci-iov-howto.txt index cfaca7e..86551cc 100644 --- a/Documentation/PCI/pci-iov-howto.txt +++ b/Documentation/PCI/pci-iov-howto.txt @@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration: Following piece of code illustrates the usage of the SR-IOV API. -static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id) { pci_enable_sriov(dev, NR_VIRTFN); @@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id * return 0; } -static void __devexit dev_remove(struct pci_dev *dev) +static void dev_remove(struct pci_dev *dev) { pci_disable_sriov(dev); @@ -131,7 +131,7 @@ static struct pci_driver dev_driver = { .name = "SR-IOV Physical Function driver", .id_table = dev_id_table, .probe = dev_probe, - .remove = __devexit_p(dev_remove), + .remove = dev_remove, .suspend = dev_suspend, .resume = dev_resume, .shutdown = dev_shutdown, diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index aa09e54..bccf602 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate initializes. __exit Exit code. Ignored for non-modular drivers. - - __devinit Device initialization code. - Identical to __init if the kernel is not compiled - with CONFIG_HOTPLUG, normal function otherwise. - __devexit The same for __exit. - Tips on when/where to use the above attributes: o The module_init()/module_exit() functions (and all initialization functions called _only_ from these) @@ -196,20 +190,6 @@ Tips on when/where to use the above attributes: o Do not mark the struct pci_driver. - o The ID table array should be marked __devinitconst; this is done - automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE(). - - o The probe() and remove() functions should be marked __devinit - and __devexit respectively. All initialization functions - exclusively called by the probe() routine, can be marked __devinit. - Ditto for remove() and __devexit. - - o If mydriver_remove() is marked with __devexit(), then all address - references to mydriver_remove must use __devexit_p(mydriver_remove) - (in the struct pci_driver declaration for example). - __devexit_p() will generate the function name _or_ NULL if the - function will be discarded. For an example, see drivers/net/tg3.c. - o Do NOT mark a function if you are not sure which mark to use. Better to not mark the function than mark the function wrong. diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 4f27785..54469bc 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -185,7 +185,7 @@ input driver: .acpi_match_table ACPI_PTR(mpu3050_acpi_match), }, .probe = mpu3050_probe, - .remove = __devexit_p(mpu3050_remove), + .remove = mpu3050_remove, .id_table = mpu3050_ids, }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt index baadbb1..5083c0b 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -60,11 +60,6 @@ clks: clkctrl@80040000 { compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; - clock-output-names = - ... - "uart", /* 32 */ - ... - "end_of_list"; }; auart0: serial@8006c000 { diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt index c2a3525..db4f2f0 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -146,10 +146,6 @@ clks: ccm@53f80000 { compatible = "fsl,imx25-ccm"; reg = <0x53f80000 0x4000>; interrupts = <31>; - clock-output-names = ... - "uart_ipg", - "uart_serial", - ...; }; uart1: serial@43f90000 { diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt index 52a49a4..e6587af 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -83,11 +83,6 @@ clks: clkctrl@80040000 { compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; - clock-output-names = - ... - "uart", /* 45 */ - ... - "end_of_list"; }; auart0: serial@8006a000 { diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index d77b4e6..f73fdf5 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -211,10 +211,6 @@ clks: ccm@020c4000 { reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; - clock-output-names = ... - "uart_ipg", - "uart_serial", - ...; }; uart1: serial@02020000 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt index 558cdf3..d4eab92 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -1,4 +1,19 @@ -GPIO line that should be set high/low to power off a device +Driver a GPIO line that can be used to turn the power off. + +The driver supports both level triggered and edge triggered power off. +At driver load time, the driver will request the given gpio line and +install a pm_power_off handler. If the optional properties 'input' is +not found, the GPIO line will be driven in the inactive +state. Otherwise its configured as an input. + +When the pm_power_off is called, the gpio is configured as an output, +and drive active, so triggering a level triggered power off +condition. This will also cause an inactive->active edge condition, so +triggering positive edge triggered power off. After a delay of 100ms, +the GPIO is set to inactive, thus causing an active->inactive edge, +triggering negative edge triggered power off. After another 100ms +delay the GPIO is driver active again. If the power is still on and +the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted. Required properties: - compatible : should be "gpio-poweroff". @@ -13,10 +28,9 @@ Optional properties: property is not specified, the GPIO is initialized as an output in its inactive state. - Examples: gpio-poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ + gpios = <&gpio 4 0>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt new file mode 100644 index 0000000..c596a6a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt @@ -0,0 +1,47 @@ +CSR SiRFprimaII pinmux controller + +Required properties: +- compatible : "sirf,prima2-pinctrl" +- reg : Address range of the pinctrl registers +- interrupts : Interrupts used by every GPIO group +- gpio-controller : Indicates this device is a GPIO controller +- interrupt-controller : Marks the device node as an interrupt controller +Optional properties: +- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m +- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m + +Please refer to pinctrl-bindings.txt in this directory for details of the common +pinctrl bindings used by client devices. + +SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes. +Each of these subnodes represents some desired configuration for a group of pins. + +Required subnode-properties: +- sirf,pins : An array of strings. Each string contains the name of a group. +- sirf,function: A string containing the name of the function to mux to the + group. + + Valid values for group and function names can be found from looking at the + group and function arrays in driver files: + drivers/pinctrl/pinctrl-sirf.c + +For example, pinctrl might have subnodes like the following: + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + +For a specific board, if it wants to use uart2 without hardware flow control, +it can add the following to its board-specific .dts file. +uart2: uart@0xb0070000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_noflow_pins_a>; +} diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt new file mode 100644 index 0000000..80a3719 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt @@ -0,0 +1,10 @@ +Device tree bindings for twl4030-wdt driver (TWL4030 watchdog) + +Required properties: + compatible = "ti,twl4030-wdt"; + +Example: + +watchdog { + compatible = "ti,twl4030-wdt"; +}; diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices index abf6361..2218266 100644 --- a/Documentation/i2c/instantiating-devices +++ b/Documentation/i2c/instantiating-devices @@ -91,7 +91,7 @@ Example (from the nxp OHCI driver): static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; -static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) +static int usb_hcd_nxp_probe(struct platform_device *pdev) { (...) struct i2c_adapter *i2c_adap; diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index dd52d51..dbca661 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER The maximum number of bytes which may be used by packets queued for each unresolved address by other network layers. (added in linux 3.3) - Seting negative value is meaningless and will retrun error. + Setting negative value is meaningless and will return error. Default: 65536 Bytes(64KB) neigh/default/unres_qlen - INTEGER @@ -215,7 +215,7 @@ tcp_ecn - INTEGER Possible values are: 0 Disable ECN. Neither initiate nor accept ECN. 1 Always request ECN on outgoing connection attempts. - 2 Enable ECN when requested by incomming connections + 2 Enable ECN when requested by incoming connections but do not request ECN on outgoing connections. Default: 2 @@ -503,7 +503,7 @@ tcp_fastopen - INTEGER tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt will be retransmitted. Should not be higher than 255. Default value - is 6, which corresponds to 63seconds till the last restransmission + is 6, which corresponds to 63seconds till the last retransmission with the current initial RTO of 1second. With this the final timeout for an active TCP connection attempt will happen after 127seconds. @@ -1331,6 +1331,12 @@ force_tllao - BOOLEAN race condition where the sender deletes the cached link-layer address prior to receiving a response to a previous solicitation." +ndisc_notify - BOOLEAN + Define mode for notification of address and device changes. + 0 - (default): do nothing + 1 - Generate unsolicited neighbour advertisements when device is brought + up or hardware address changes. + icmp/*: ratelimit - INTEGER Limit the maximal rates for sending ICMPv6 packets. @@ -1530,7 +1536,7 @@ cookie_hmac_alg - STRING * sha1 * none Ability to assign md5 or sha1 as the selected alg is predicated on the - configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and + configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and CONFIG_CRYPTO_SHA1). Default: Dependent on configuration. MD5 if available, else SHA1 if @@ -1548,7 +1554,7 @@ rcvbuf_policy - INTEGER blocking. 1: rcvbuf space is per association - 0: recbuf space is per socket + 0: rcvbuf space is per socket Default: 0 diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 4abe83e..03591a7 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -642,12 +642,13 @@ out the following operations: * During system suspend it calls pm_runtime_get_noresume() and pm_runtime_barrier() for every device right before executing the subsystem-level .suspend() callback for it. In addition to that it calls - pm_runtime_disable() for every device right after executing the - subsystem-level .suspend() callback for it. + __pm_runtime_disable() with 'false' as the second argument for every device + right before executing the subsystem-level .suspend_late() callback for it. * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync() - for every device right before and right after executing the subsystem-level - .resume() callback for it, respectively. + for every device right after executing the subsystem-level .resume_early() + callback and right after executing the subsystem-level .resume() callback + for it, respectively. 7. Generic subsystem callbacks diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt index 409d9f9..f7edc3a 100644 --- a/Documentation/rpmsg.txt +++ b/Documentation/rpmsg.txt @@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev) return 0; } -static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev) +static void rpmsg_sample_remove(struct rpmsg_channel *rpdev) { dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n"); } @@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = { .id_table = rpmsg_driver_sample_id_table, .probe = rpmsg_sample_probe, .callback = rpmsg_sample_cb, - .remove = __devexit_p(rpmsg_sample_remove), + .remove = rpmsg_sample_remove, }; static int __init init(void) diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 7312ec1..2331eb2 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers: }, .probe = CHIP_probe, - .remove = __devexit_p(CHIP_remove), + .remove = CHIP_remove, .suspend = CHIP_suspend, .resume = CHIP_resume, }; @@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP". Your probe() code might look like this unless you're creating a device which is managing a bus (appearing under /sys/class/spi_master). - static int __devinit CHIP_probe(struct spi_device *spi) + static int CHIP_probe(struct spi_device *spi) { struct CHIP *chip; struct CHIP_platform_data *pdata; diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 2907ba6..ccd4258 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -38,6 +38,7 @@ show up in /proc/sys/kernel: - l2cr [ PPC only ] - modprobe ==> Documentation/debugging-modules.txt - modules_disabled +- msg_next_id [ sysv ipc ] - msgmax - msgmnb - msgmni @@ -62,7 +63,9 @@ show up in /proc/sys/kernel: - rtsig-max - rtsig-nr - sem +- sem_next_id [ sysv ipc ] - sg-big-buff [ generic SCSI device (sg) ] +- shm_next_id [ sysv ipc ] - shm_rmid_forced - shmall - shmmax [ sysv ipc ] @@ -320,6 +323,22 @@ to false. ============================================================== +msg_next_id, sem_next_id, and shm_next_id: + +These three toggles allows to specify desired id for next allocated IPC +object: message, semaphore or shared memory respectively. + +By default they are equal to -1, which means generic allocation logic. +Possible values to set are in range {0..INT_MAX}. + +Notes: +1) kernel doesn't guarantee, that new object will have desired id. So, +it's up to userspace, how to handle an object with "wrong" id. +2) Toggle with non-default value will be set back to -1 by kernel after +successful IPC object allocation. + +============================================================== + nmi_watchdog: Enables/Disables the NMI watchdog on x86 systems. When the value is @@ -542,6 +561,19 @@ are doing anyway :) ============================================================== +shmall: + +This parameter sets the total amount of shared memory pages that +can be used system wide. Hence, SHMALL should always be at least +ceil(shmmax/PAGE_SIZE). + +If you are not sure what the default PAGE_SIZE is on your Linux +system, you can run the following command: + +# getconf PAGE_SIZE + +============================================================== + shmmax: This value can be used to query and set the run time limit diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 32bfe92..b89567a 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -174,8 +174,7 @@ The recommended approach is as follows: static atomic_t drv_instance = ATOMIC_INIT(0); -static int __devinit drv_probe(struct pci_dev *pdev, - const struct pci_device_id *pci_id) +static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { ... state->instance = atomic_inc_return(&drv_instance) - 1; diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt index 3e74f13..44c1d93 100644 --- a/Documentation/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -182,8 +182,7 @@ int iterate(void *p) static atomic_t drv_instance = ATOMIC_INIT(0); -static int __devinit drv_probe(struct pci_dev *pdev, - const struct pci_device_id *pci_id) +static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { ... state->instance = atomic_inc_return(&drv_instance) - 1; diff --git a/MAINTAINERS b/MAINTAINERS index 4e2a1f6..3105c48 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -228,7 +228,7 @@ S: Maintained F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS -M: Joey Lee +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/acer-wmi.c @@ -449,6 +449,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/char/agp/ F: include/linux/agp* +F: include/uapi/linux/agp* AHA152X SCSI DRIVER M: "Juergen E. Fischer" @@ -589,6 +590,7 @@ M: Jiri Kosina S: Odd fixes F: arch/x86/kernel/apm_32.c F: include/linux/apm_bios.h +F: include/uapi/linux/apm_bios.h F: drivers/char/apm-emulation.c APPLE BCM5974 MULTITOUCH DRIVER @@ -646,7 +648,7 @@ F: arch/arm/ ARM SUB-ARCHITECTURES L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: MAINTAINED +S: Maintained F: arch/arm/mach-*/ F: arch/arm/plat-*/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git @@ -1005,7 +1007,6 @@ F: drivers/mmc/host/msm_sdcc.c F: drivers/mmc/host/msm_sdcc.h F: drivers/tty/serial/msm_serial.h F: drivers/tty/serial/msm_serial.c -F: drivers/platform/msm/ F: drivers/*/pm8???-* F: include/linux/mfd/pm8xxx/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git @@ -1069,7 +1070,6 @@ M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.arm.linux.org.uk/ S: Maintained -F: arch/arm/common/time-acorn.c F: arch/arm/include/asm/hardware/entry-macro-iomd.S F: arch/arm/include/asm/hardware/ioc.h F: arch/arm/include/asm/hardware/iomd.h @@ -1094,7 +1094,6 @@ W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/plat-samsung/ F: arch/arm/plat-s3c24xx/ -F: arch/arm/plat-s5p/ F: arch/arm/mach-s3c24*/ F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* @@ -1125,7 +1124,6 @@ M: Sylwester Nawrocki L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -F: arch/arm/plat-s5p/dev-fimc* F: arch/arm/plat-samsung/include/plat/*fimc* F: drivers/media/platform/s5p-fimc/ @@ -1136,7 +1134,7 @@ M: Jeongtae Park L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -F: arch/arm/plat-s5p/dev-mfc.c +F: arch/arm/plat-samsung/s5p-dev-mfc.c F: drivers/media/platform/s5p-mfc/ ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT @@ -1254,7 +1252,7 @@ F: drivers/video/vt8500lcdfb.* F: drivers/video/wm8505fb* F: drivers/video/wmt_ge_rops.* F: drivers/tty/serial/vt8500_serial.c -F: drivers/rtc/rtc-vt8500-c +F: drivers/rtc/rtc-vt8500.c F: drivers/mmc/host/wmt-sdmmc.c ARM/ZIPIT Z2 SUPPORT @@ -1353,6 +1351,14 @@ W: http://wireless.kernel.org/en/users/Drivers/ath9k S: Supported F: drivers/net/wireless/ath/ath9k/ +WILOCITY WIL6210 WIRELESS DRIVER +M: Vladimir Kondratiev +L: linux-wireless@vger.kernel.org +L: wil6210@qca.qualcomm.com +S: Supported +W: http://wireless.kernel.org/en/users/Drivers/wil6210 +F: drivers/net/wireless/ath/wil6210/ + CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter L: linux-wireless@vger.kernel.org @@ -1388,6 +1394,7 @@ W: http://linux-atm.sourceforge.net S: Maintained F: drivers/atm/ F: include/linux/atm* +F: include/uapi/linux/atm* ATMEL AT91 / AT32 MCI DRIVER M: Ludovic Desroches @@ -1406,13 +1413,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/dma/at_hdmac.c F: drivers/dma/at_hdmac_regs.h -F: arch/arm/mach-at91/include/mach/at_hdmac.h +F: include/linux/platform_data/dma-atmel.h ATMEL ISI DRIVER M: Josh Wu L: linux-media@vger.kernel.org S: Supported -F: drivers/media/platform/atmel-isi.c +F: drivers/media/platform/soc_camera/atmel-isi.c F: include/media/atmel-isi.h ATMEL LCDFB DRIVER @@ -1467,6 +1474,7 @@ W: http://people.redhat.com/sgrubb/audit/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git S: Maintained F: include/linux/audit.h +F: include/uapi/linux/audit.h F: kernel/audit* AUXILIARY DISPLAY DRIVERS @@ -1497,7 +1505,7 @@ M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained -F: include/linux/ax25.h +F: include/uapi/linux/ax25.h F: include/net/ax25.h F: net/ax25/ @@ -1558,7 +1566,7 @@ M: "Tigran A. Aivazian" S: Maintained F: Documentation/filesystems/bfs.txt F: fs/bfs/ -F: include/linux/bfs_fs.h +F: include/uapi/linux/bfs_fs.h BLACKFIN ARCHITECTURE M: Mike Frysinger @@ -1655,7 +1663,7 @@ L: netdev@vger.kernel.org W: http://sourceforge.net/projects/bonding/ S: Supported F: drivers/net/bonding/ -F: include/linux/if_bonding.h +F: include/uapi/linux/if_bonding.h BROADCOM B44 10/100 ETHERNET DRIVER M: Gary Zambrano @@ -1734,6 +1742,7 @@ L: linux-scsi@vger.kernel.org S: Supported F: block/bsg.c F: include/linux/bsg.h +F: include/uapi/linux/bsg.h BT87X AUDIO DRIVER M: Clemens Ladisch @@ -1804,7 +1813,7 @@ L: netdev@vger.kernel.org S: Supported F: Documentation/networking/caif/ F: drivers/net/caif/ -F: include/linux/caif/ +F: include/uapi/linux/caif/ F: include/net/caif/ F: net/caif/ @@ -1825,11 +1834,11 @@ W: http://gitorious.org/linux-can T: git git://gitorious.org/linux-can/linux-can-next.git S: Maintained F: net/can/ -F: include/linux/can.h F: include/linux/can/core.h -F: include/linux/can/bcm.h -F: include/linux/can/raw.h -F: include/linux/can/gw.h +F: include/uapi/linux/can.h +F: include/uapi/linux/can/bcm.h +F: include/uapi/linux/can/raw.h +F: include/uapi/linux/can/gw.h CAN NETWORK DRIVERS M: Wolfgang Grandegger @@ -1840,15 +1849,16 @@ T: git git://gitorious.org/linux-can/linux-can-next.git S: Maintained F: drivers/net/can/ F: include/linux/can/dev.h -F: include/linux/can/error.h -F: include/linux/can/netlink.h F: include/linux/can/platform/ +F: include/uapi/linux/can/error.h +F: include/uapi/linux/can/netlink.h CAPABILITIES M: Serge Hallyn L: linux-security-module@vger.kernel.org S: Supported F: include/linux/capability.h +F: include/uapi/linux/capability.h F: security/capability.c F: security/commoncap.c F: kernel/capability.c @@ -1861,6 +1871,7 @@ W: http://www.ibm.com/developerworks/power/cell/ S: Supported F: arch/powerpc/include/asm/cell*.h F: arch/powerpc/include/asm/spu*.h +F: arch/powerpc/include/uapi/asm/spu*.h F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ @@ -1909,7 +1920,7 @@ W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained -F: include/linux/nl80211.h +F: include/uapi/linux/nl80211.h F: include/net/cfg80211.h F: net/wireless/* X: net/wireless/wext* @@ -1961,9 +1972,9 @@ S: Maintained F: drivers/usb/host/ohci-ep93xx.c CIRRUS LOGIC CS4270 SOUND DRIVER -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) -S: Supported +S: Odd Fixes F: sound/soc/codecs/cs4270* CLEANCACHE API @@ -2012,6 +2023,7 @@ S: Maintained F: Documentation/filesystems/coda.txt F: fs/coda/ F: include/linux/coda*.h +F: include/uapi/linux/coda*.h COMMON CLK FRAMEWORK M: Mike Turquette @@ -2266,6 +2278,7 @@ W: http://www.cyclades.com/ S: Orphan F: drivers/tty/cyclades.c F: include/linux/cyclades.h +F: include/uapi/linux/cyclades.h CYCLADES PC300 DRIVER W: http://www.cyclades.com/ @@ -2323,6 +2336,7 @@ L: dccp@vger.kernel.org W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp S: Maintained F: include/linux/dccp.h +F: include/uapi/linux/dccp.h F: include/linux/tfrc.h F: net/dccp/ @@ -2349,7 +2363,7 @@ M: Massimo Dal Zotto W: http://www.debian.org/~dz/i8k/ S: Maintained F: drivers/char/i8k.c -F: include/linux/i8k.h +F: include/uapi/linux/i8k.h DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas) M: Doug Warzecha @@ -2422,6 +2436,7 @@ S: Maintained F: Documentation/filesystems/quota.txt F: fs/quota/ F: include/linux/quota*.h +F: include/uapi/linux/quota*.h DISPLAYLINK USB 2.0 FRAMEBUFFER DRIVER (UDLFB) M: Bernie Thompson @@ -2528,6 +2543,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/gpu/drm/ F: include/drm/ +F: include/uapi/drm/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) M: Daniel Vetter @@ -2537,6 +2553,7 @@ T: git git://people.freedesktop.org/~danvet/drm-intel S: Supported F: drivers/gpu/drm/i915 F: include/drm/i915* +F: include/uapi/drm/i915* DRM DRIVERS FOR EXYNOS M: Inki Dae @@ -2548,6 +2565,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* +F: include/uapi/drm/exynos* DRM DRIVERS FOR NVIDIA TEGRA M: Thierry Reding @@ -2622,7 +2640,7 @@ W: http://github.com/mkrufky Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/media_tree.git S: Maintained -F: drivers/media/usb/dvb-usb-v2/cxusb* +F: drivers/media/usb/dvb-usb/cxusb* DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER M: Antti Palosaari @@ -2722,6 +2740,7 @@ L: netfilter-devel@vger.kernel.org W: http://ebtables.sourceforge.net/ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h +F: include/uapi/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c EC100 MEDIA DRIVER @@ -2933,12 +2952,6 @@ M: Maxim Levitsky S: Maintained F: drivers/media/rc/ene_ir.* -EPSON 1355 FRAMEBUFFER DRIVER -M: Christopher Hoover -M: Christopher Hoover -S: Maintained -F: drivers/video/epson1355fb.c - EPSON S1D13XXX FRAMEBUFFER DRIVER M: Kristoffer Ericson S: Maintained @@ -3051,6 +3064,7 @@ M: Eric Paris S: Maintained F: fs/notify/fanotify/ F: include/linux/fanotify.h +F: include/uapi/linux/fanotify.h FARSYNC SYNCHRONOUS DRIVER M: Kevin Curtis @@ -3074,6 +3088,7 @@ F: drivers/scsi/fcoe/ F: include/scsi/fc/ F: include/scsi/libfc.h F: include/scsi/libfcoe.h +F: include/uapi/scsi/fc/ FILE LOCKING (flock() and fcntl()/lockf()) M: Matthew Wilcox @@ -3081,6 +3096,8 @@ L: linux-fsdevel@vger.kernel.org S: Maintained F: include/linux/fcntl.h F: include/linux/fs.h +F: include/uapi/linux/fcntl.h +F: include/uapi/linux/fs.h F: fs/fcntl.c F: fs/locks.c @@ -3170,11 +3187,13 @@ F: Documentation/devicetree/bindings/fb/ F: drivers/video/ F: include/video/ F: include/linux/fb.h +F: include/uapi/video/ +F: include/uapi/linux/fb.h FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi +M: Timur Tabi L: linux-fbdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/video/fsl-diu-fb.* FREESCALE DMA DRIVER @@ -3196,7 +3215,7 @@ M: Sascha Hauer L: linux-fbdev@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: arch/arm/plat-mxc/include/mach/imxfb.h +F: include/linux/platform_data/video-imxfb.h F: drivers/video/imxfb.c FREESCALE SOC FS_ENET DRIVER @@ -3209,9 +3228,8 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE QUICC ENGINE LIBRARY -M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Orphan F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h @@ -3230,16 +3248,16 @@ S: Maintained F: drivers/net/ethernet/freescale/ucc_geth* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi +M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: drivers/tty/serial/ucc_uart.c FREESCALE SOC SOUND DRIVERS -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: sound/soc/fsl/fsl* F: sound/soc/fsl/mpc8610_hpcd.c @@ -3273,6 +3291,16 @@ F: Documentation/filesystems/caching/ F: fs/fscache/ F: include/linux/fscache*.h +F2FS FILE SYSTEM +M: Jaegeuk Kim +L: linux-f2fs-devel@lists.sourceforge.net +W: http://en.wikipedia.org/wiki/F2FS +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git +S: Maintained +F: Documentation/filesystems/f2fs.txt +F: fs/f2fs/ +F: include/linux/f2fs_fs.h + FUJITSU FR-V (FRV) PORT M: David Howells S: Maintained @@ -3304,7 +3332,7 @@ L: fuse-devel@lists.sourceforge.net W: http://fuse.sourceforge.net/ S: Maintained F: fs/fuse/ -F: include/linux/fuse.h +F: include/uapi/linux/fuse.h FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) M: Rik Faith @@ -3351,6 +3379,7 @@ L: linux-arch@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git S: Maintained F: include/asm-generic +F: include/uapi/asm-generic GENERIC UIO DRIVER FOR PCI DEVICES M: "Michael S. Tsirkin" @@ -3367,7 +3396,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw.git S: Supported F: Documentation/filesystems/gfs2*.txt F: fs/gfs2/ -F: include/linux/gfs2_ondisk.h +F: include/uapi/linux/gfs2_ondisk.h GIGASET ISDN DRIVERS M: Hansjoerg Lipp @@ -3377,7 +3406,7 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained F: Documentation/isdn/README.gigaset F: drivers/isdn/gigaset/ -F: include/linux/gigaset_dev.h +F: include/uapi/linux/gigaset_dev.h GPIO SUBSYSTEM M: Grant Likely @@ -3534,6 +3563,7 @@ S: Supported F: Documentation/scsi/hpsa.txt F: drivers/scsi/hpsa*.[ch] F: include/linux/cciss*.h +F: include/uapi/linux/cciss*.h HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss) M: Mike Miller @@ -3542,6 +3572,7 @@ S: Supported F: Documentation/blockdev/cciss.txt F: drivers/block/cciss* F: include/linux/cciss_ioctl.h +F: include/uapi/linux/cciss_ioctl.h HFS FILESYSTEM L: linux-fsdevel@vger.kernel.org @@ -3576,6 +3607,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained F: drivers/hid/ F: include/linux/hid* +F: include/uapi/linux/hid* HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS M: Thomas Gleixner @@ -3607,7 +3639,7 @@ M: Jes Sorensen L: linux-hippi@sunsite.dk S: Maintained F: include/linux/hippidevice.h -F: include/linux/if_hippi.h +F: include/uapi/linux/if_hippi.h F: net/802/hippi.c F: drivers/net/hippi/ @@ -3635,6 +3667,7 @@ S: Maintained F: Documentation/timers/hpet.txt F: drivers/char/hpet.c F: include/linux/hpet.h +F: include/uapi/linux/hpet.h HPET: x86 M: "Venkatesh Pallipadi (Venki)" @@ -3735,6 +3768,8 @@ F: Documentation/i2c/ F: drivers/i2c/ F: include/linux/i2c.h F: include/linux/i2c-*.h +F: include/uapi/linux/i2c.h +F: include/uapi/linux/i2c-*.h I2C-TAOS-EVM DRIVER M: Jean Delvare @@ -3850,7 +3885,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git S: Maintained F: net/ieee802154/ F: net/mac802154/ -F: drivers/ieee802154/ +F: drivers/net/ieee802154/ IGUANAWORKS USB IR TRANSCEIVER M: Sean Young @@ -3901,7 +3936,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported F: Documentation/infiniband/ F: drivers/infiniband/ -F: include/linux/if_infiniband.h +F: include/uapi/linux/if_infiniband.h INOTIFY M: John McCutchan @@ -3911,6 +3946,7 @@ S: Maintained F: Documentation/filesystems/inotify.txt F: fs/notify/inotify/ F: include/linux/inotify.h +F: include/uapi/linux/inotify.h INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS M: Dmitry Torokhov @@ -3921,6 +3957,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git S: Maintained F: drivers/input/ F: include/linux/input.h +F: include/uapi/linux/input.h F: include/linux/input/ INPUT MULTITOUCH (MT) PROTOCOL @@ -3941,7 +3978,6 @@ L: linux-scsi@vger.kernel.org T: git git://git.code.sf.net/p/intel-sas/isci S: Supported F: drivers/scsi/isci/ -F: firmware/isci/ INTEL IDLE DRIVER M: Len Brown @@ -4036,12 +4072,6 @@ F: Documentation/networking/ixgbe.txt F: Documentation/networking/ixgbevf.txt F: drivers/net/ethernet/intel/ -INTEL MRST PMU DRIVER -M: Len Brown -L: linux-pm@vger.kernel.org -S: Supported -F: arch/x86/platform/mrst/pmu.* - INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT M: Stanislav Yakovlev L: linux-wireless@vger.kernel.org @@ -4070,7 +4100,7 @@ S: Supported W: http://linuxwimax.org F: Documentation/wimax/README.i2400m F: drivers/net/wimax/i2400m/ -F: include/linux/wimax/i2400m.h +F: include/uapi/linux/wimax/i2400m.h INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy) M: Stanislaw Gruszka @@ -4092,9 +4122,9 @@ INTEL MANAGEMENT ENGINE (mei) M: Tomas Winkler L: linux-kernel@vger.kernel.org S: Supported -F: include/linux/mei.h +F: include/uapi/linux/mei.h F: drivers/misc/mei/* -F: Documentation/mei/* +F: Documentation/misc-devices/mei/* IOC3 ETHERNET DRIVER M: Ralf Baechle @@ -4134,6 +4164,7 @@ S: Supported F: Documentation/IPMI.txt F: drivers/char/ipmi/ F: include/linux/ipmi* +F: include/uapi/linux/ipmi* IPS SCSI RAID DRIVER M: Adaptec OEM Raid Solutions @@ -4151,7 +4182,7 @@ L: lvs-devel@vger.kernel.org S: Maintained F: Documentation/networking/ipvs-sysctl.txt F: include/net/ip_vs.h -F: include/linux/ip_vs.h +F: include/uapi/linux/ip_vs.h F: net/netfilter/ipvs/ IPWIRELESS DRIVER @@ -4164,8 +4195,8 @@ IPX NETWORK LAYER M: Arnaldo Carvalho de Melo L: netdev@vger.kernel.org S: Maintained -F: include/linux/ipx.h F: include/net/ipx.h +F: include/uapi/linux/ipx.h F: net/ipx/ IRDA SUBSYSTEM @@ -4228,6 +4259,8 @@ F: Documentation/isdn/ F: drivers/isdn/ F: include/linux/isdn.h F: include/linux/isdn/ +F: include/uapi/linux/isdn.h +F: include/uapi/linux/isdn/ ISDN SUBSYSTEM (Eicon active card driver) M: Armin Schindler @@ -4268,7 +4301,7 @@ W: http://www.ivtvdriver.org S: Maintained F: Documentation/video4linux/*.ivtv F: drivers/media/pci/ivtv/ -F: include/linux/ivtv* +F: include/uapi/linux/ivtv* IX2505V MEDIA DRIVER M: Malcolm Priestley @@ -4306,7 +4339,7 @@ L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/doc/jffs2.html S: Maintained F: fs/jffs2/ -F: include/linux/jffs2.h +F: include/uapi/linux/jffs2.h JOURNALLING LAYER FOR BLOCK DEVICES (JBD) M: Andrew Morton @@ -4389,11 +4422,13 @@ W: http://nfs.sourceforge.net/ S: Supported F: fs/nfsd/ F: include/linux/nfsd/ +F: include/uapi/linux/nfsd/ F: fs/lockd/ F: fs/nfs_common/ F: net/sunrpc/ F: include/linux/lockd/ F: include/linux/sunrpc/ +F: include/uapi/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) M: Marcelo Tosatti @@ -4405,6 +4440,7 @@ F: Documentation/*/kvm.txt F: arch/*/kvm/ F: arch/*/include/asm/kvm* F: include/linux/kvm* +F: include/uapi/linux/kvm* F: virt/kvm/ KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V @@ -4451,6 +4487,7 @@ W: http://kernel.org/pub/linux/utils/kernel/kexec/ L: kexec@lists.infradead.org S: Maintained F: include/linux/kexec.h +F: include/uapi/linux/kexec.h F: kernel/kexec.c KEYS/KEYRINGS: @@ -4692,6 +4729,7 @@ LLC (802.2) M: Arnaldo Carvalho de Melo S: Maintained F: include/linux/llc.h +F: include/uapi/linux/llc.h F: include/net/llc* F: net/llc/ @@ -4912,7 +4950,7 @@ MATROX FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org S: Orphan F: drivers/video/matrox/matroxfb_* -F: include/linux/matroxfb.h +F: include/uapi/linux/matroxfb.h MAX16065 HARDWARE MONITOR DRIVER M: Guenter Roeck @@ -4994,7 +5032,7 @@ T: git git://git.infradead.org/mtd-2.6.git S: Maintained F: drivers/mtd/ F: include/linux/mtd/ -F: include/mtd/ +F: include/uapi/mtd/ MICROBLAZE ARCHITECTURE M: Michal Simek @@ -5032,12 +5070,6 @@ F: Documentation/video4linux/meye.txt F: drivers/media/pci/meye/ F: include/uapi/linux/meye.h -MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER -M: Pavel Pisa -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: drivers/mmc/host/imxmmc.* - MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD M: Jiri Slaby S: Maintained @@ -5052,7 +5084,7 @@ S: Maintained F: drivers/media/radio/radio-mr800.c MSI LAPTOP SUPPORT -M: "Lee, Chun-Yi" +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/msi-laptop.c @@ -5076,6 +5108,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git S: Maintained F: drivers/mmc/ F: include/linux/mmc/ +F: include/uapi/linux/mmc/ MULTIMEDIA CARD (MMC) ETC. OVER SPI S: Orphan @@ -5176,6 +5209,8 @@ S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ F: include/net/netfilter/ +F: include/uapi/linux/netfilter* +F: include/uapi/linux/netfilter/ F: net/*/netfilter.c F: net/*/netfilter/ F: net/netfilter/ @@ -5194,8 +5229,8 @@ M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained -F: include/linux/netrom.h F: include/net/netrom.h +F: include/uapi/linux/netrom.h F: net/netrom/ NETWORK BLOCK DEVICE (NBD) @@ -5204,6 +5239,7 @@ S: Maintained F: Documentation/blockdev/nbd.txt F: drivers/block/nbd.c F: include/linux/nbd.h +F: include/uapi/linux/nbd.h NETWORK DROP MONITOR M: Neil Horman @@ -5225,6 +5261,9 @@ F: include/net/ F: include/linux/in.h F: include/linux/net.h F: include/linux/netdevice.h +F: include/uapi/linux/in.h +F: include/uapi/linux/net.h +F: include/uapi/linux/netdevice.h NETWORKING [IPv4/IPv6] M: "David S. Miller" @@ -5270,6 +5309,7 @@ F: net/rfkill/ F: net/wireless/ F: include/net/ieee80211* F: include/linux/wireless.h +F: include/uapi/linux/wireless.h F: include/net/iw_handler.h F: drivers/net/wireless/ @@ -5289,6 +5329,8 @@ F: include/linux/fcdevice.h F: include/linux/fddidevice.h F: include/linux/hippidevice.h F: include/linux/inetdevice.h +F: include/uapi/linux/if_* +F: include/uapi/linux/netdevice.h NETXEN (1/10) GbE SUPPORT M: Sony Chacko @@ -5306,8 +5348,8 @@ L: linux-wireless@vger.kernel.org L: linux-nfc@lists.01.org (moderated for non-subscribers) S: Maintained F: net/nfc/ -F: include/linux/nfc.h F: include/net/nfc/ +F: include/uapi/linux/nfc.h F: drivers/nfc/ F: include/linux/platform_data/pn544.h @@ -5324,6 +5366,8 @@ F: net/sunrpc/ F: include/linux/lockd/ F: include/linux/nfs* F: include/linux/sunrpc/ +F: include/uapi/linux/nfs* +F: include/uapi/linux/sunrpc/ NI5010 NETWORK DRIVER M: Jan-Pascal van Best @@ -5385,6 +5429,15 @@ F: arch/arm/*omap*/ F: drivers/i2c/busses/i2c-omap.c F: include/linux/i2c-omap.h +OMAP DEVICE TREE SUPPORT +M: Benoît Cousson +M: Tony Lindgren +L: linux-omap@vger.kernel.org +L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/boot/dts/*omap* +F: arch/arm/boot/dts/*am3* + OMAP CLOCK FRAMEWORK SUPPORT M: Paul Walmsley L: linux-omap@vger.kernel.org @@ -5461,8 +5514,7 @@ M: Benoît Cousson M: Paul Walmsley L: linux-omap@vger.kernel.org S: Maintained -F: arch/arm/mach-omap2/omap_hwmod.c -F: arch/arm/plat-omap/include/plat/omap_hwmod.h +F: arch/arm/mach-omap2/omap_hwmod.* OMAP HWMOD DATA FOR OMAP4-BASED DEVICES M: Benoît Cousson @@ -5504,6 +5556,7 @@ M: Harald Welte S: Maintained F: drivers/char/pcmcia/cm4000_cs.c F: include/linux/cm4000_cs.h +F: include/uapi/linux/cm4000_cs.h OMNIKEY CARDMAN 4040 DRIVER M: Harald Welte @@ -5662,7 +5715,7 @@ S: Orphan F: drivers/parport/ F: include/linux/parport*.h F: drivers/char/ppdev.c -F: include/linux/ppdev.h +F: include/uapi/linux/ppdev.h PARAVIRT_OPS INTERFACE M: Jeremy Fitzhardinge @@ -5803,11 +5856,11 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core S: Supported F: kernel/events/* F: include/linux/perf_event.h +F: include/uapi/linux/perf_event.h F: arch/*/kernel/perf_event*.c F: arch/*/kernel/*/perf_event*.c F: arch/*/kernel/*/*/perf_event*.c F: arch/*/include/asm/perf_event.h -F: arch/*/lib/perf_event*.c F: arch/*/kernel/perf_callchain.c F: tools/perf/ @@ -5816,6 +5869,7 @@ M: Christoph Hellwig L: linux-abi-devel@lists.sourceforge.net S: Maintained F: include/linux/personality.h +F: include/uapi/linux/personality.h PHONET PROTOCOL M: Remi Denis-Courmont @@ -5823,6 +5877,7 @@ S: Supported F: Documentation/networking/phonet.txt F: include/linux/phonet.h F: include/net/phonet/ +F: include/uapi/linux/phonet.h F: net/phonet/ PHRAM MTD DRIVER @@ -5871,6 +5926,7 @@ M: Jiri Kosina S: Maintained F: drivers/block/pktcdvd.c F: include/linux/pktcdvd.h +F: include/uapi/linux/pktcdvd.h PKUNITY SOC DRIVERS M: Guan Xuetao @@ -5945,7 +6001,7 @@ PPP OVER ATM (RFC 2364) M: Mitchell Blank Jr S: Maintained F: net/atm/pppoatm.c -F: include/linux/atmppp.h +F: include/uapi/linux/atmppp.h PPP OVER ETHERNET M: Michal Ostrowski @@ -5958,6 +6014,7 @@ M: James Chapman S: Maintained F: net/l2tp/l2tp_ppp.c F: include/linux/if_pppol2tp.h +F: include/uapi/linux/if_pppol2tp.h PPS SUPPORT M: Rodolfo Giometti @@ -6055,6 +6112,7 @@ F: include/asm-generic/syscall.h F: include/linux/ptrace.h F: include/linux/regset.h F: include/linux/tracehook.h +F: include/uapi/linux/ptrace.h F: kernel/ptrace.c PVRUSB2 VIDEO4LINUX DRIVER @@ -6083,7 +6141,6 @@ T: git git://gitorious.org/linux-pwm/linux-pwm.git F: Documentation/pwm.txt F: Documentation/devicetree/bindings/pwm/ F: include/linux/pwm.h -F: include/linux/of_pwm.h F: drivers/pwm/ F: drivers/video/backlight/pwm_bl.c F: include/linux/pwm_backlight.h @@ -6179,8 +6236,8 @@ M: Anders Larsen W: http://www.alarsen.net/linux/qnx4fs/ S: Maintained F: fs/qnx4/ -F: include/linux/qnx4_fs.h -F: include/linux/qnxtypes.h +F: include/uapi/linux/qnx4_fs.h +F: include/uapi/linux/qnxtypes.h QT1010 MEDIA DRIVER M: Antti Palosaari @@ -6214,7 +6271,7 @@ M: Benjamin Herrenschmidt L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/aty/radeon* -F: include/linux/radeonfb.h +F: include/uapi/linux/radeonfb.h RADIOSHARK RADIO DRIVER M: Hans de Goede @@ -6315,6 +6372,7 @@ S: Maintained F: Documentation/rtc.txt F: drivers/rtc/ F: include/linux/rtc.h +F: include/uapi/linux/rtc.h REISERFS FILE SYSTEM L: reiserfs-devel@vger.kernel.org @@ -6369,8 +6427,8 @@ M: Ralf Baechle L: linux-hams@vger.kernel.org W: http://www.linux-ax25.org/ S: Maintained -F: include/linux/rose.h F: include/net/rose.h +F: include/uapi/linux/rose.h F: net/rose/ RTL2830 MEDIA DRIVER @@ -6547,6 +6605,8 @@ S: Supported F: include/linux/clocksource.h F: include/linux/time.h F: include/linux/timex.h +F: include/uapi/linux/time.h +F: include/uapi/linux/timex.h F: kernel/time/clocksource.c F: kernel/time/time*.c F: kernel/time/ntp.c @@ -6571,6 +6631,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core S: Maintained F: kernel/sched/ F: include/linux/sched.h +F: include/uapi/linux/sched.h SCORE ARCHITECTURE M: Chen Liqin @@ -6724,7 +6785,7 @@ SENSABLE PHANTOM M: Jiri Slaby S: Maintained F: drivers/misc/phantom.c -F: include/linux/phantom.h +F: include/uapi/linux/phantom.h SERIAL ATA (SATA) SUBSYSTEM M: Jeff Garzik @@ -6982,6 +7043,7 @@ L: linux-raid@vger.kernel.org S: Supported F: drivers/md/ F: include/linux/raid/ +F: include/uapi/linux/raid/ SONIC NETWORK DRIVER M: Thomas Bogendoerfer @@ -7022,6 +7084,7 @@ T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained F: Documentation/sound/ F: include/sound/ +F: include/uapi/sound/ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) @@ -7122,6 +7185,7 @@ S: Maintained F: Documentation/spi/ F: drivers/spi/ F: include/linux/spi/ +F: include/uapi/linux/spi/ SPIDERNET NETWORK DRIVER for CELL M: Ishizaki Kou @@ -7258,7 +7322,7 @@ F: drivers/staging/rtl8712/ STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER M: Teddy Wang S: Odd Fixes -F: drivers/staging/sm7xx/ +F: drivers/staging/sm7xxfb/ STAGING - SOFTLOGIC 6x10 MPEG CODEC M: Ben Collins @@ -7276,7 +7340,7 @@ S: Odd Fixes F: drivers/staging/speakup/ STAGING - TI DSP BRIDGE DRIVERS -M: Omar Ramirez Luna +M: Omar Ramirez Luna S: Odd Fixes F: drivers/staging/tidspbridge/ @@ -7384,8 +7448,8 @@ TC CLASSIFIER M: Jamal Hadi Salim L: netdev@vger.kernel.org S: Maintained -F: include/linux/pkt_cls.h F: include/net/pkt_cls.h +F: include/uapi/linux/pkt_cls.h F: net/sched/ TCP LOW PRIORITY MODULE @@ -7477,6 +7541,7 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/team/ F: include/linux/if_team.h +F: include/uapi/linux/if_team.h TECHNOTREND USB IR RECEIVER M: Sean Young @@ -7575,7 +7640,7 @@ L: netdev@vger.kernel.org (core kernel code) L: tipc-discussion@lists.sourceforge.net (user apps, general discussion) W: http://tipc.sourceforge.net/ S: Maintained -F: include/linux/tipc*.h +F: include/uapi/linux/tipc*.h F: net/tipc/ TILE ARCHITECTURE @@ -7625,6 +7690,7 @@ W: http://www.buzzard.org.uk/toshiba/ S: Maintained F: drivers/char/toshiba.c F: include/linux/toshiba.h +F: include/uapi/linux/toshiba.h TMIO MMC DRIVER M: Guennadi Liakhovetski @@ -7692,6 +7758,9 @@ F: drivers/tty/serial/serial_core.c F: include/linux/serial_core.h F: include/linux/serial.h F: include/linux/tty.h +F: include/uapi/linux/serial_core.h +F: include/uapi/linux/serial.h +F: include/uapi/linux/tty.h TUA9001 MEDIA DRIVER M: Antti Palosaari @@ -7771,7 +7840,7 @@ M: David Herrmann L: linux-input@vger.kernel.org S: Maintained F: drivers/hid/uhid.c -F: include/linux/uhid.h +F: include/uapi/linux/uhid.h ULTRA-WIDEBAND (UWB) SUBSYSTEM: L: linux-usb@vger.kernel.org @@ -7800,6 +7869,7 @@ S: Maintained F: Documentation/cdrom/ F: drivers/cdrom/cdrom.c F: include/linux/cdrom.h +F: include/uapi/linux/cdrom.h UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER M: Vinayak Holikatti @@ -7817,7 +7887,7 @@ T: git git://git.infradead.org/ubi-2.6.git S: Maintained F: drivers/mtd/ubi/ F: include/linux/mtd/ubi.h -F: include/mtd/ubi-user.h +F: include/uapi/mtd/ubi-user.h UNSORTED BLOCK IMAGES (UBI) Fastmap M: Richard Weinberger @@ -7851,7 +7921,7 @@ M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/net/usb/cdc_*.c -F: include/linux/usb/cdc.h +F: include/uapi/linux/usb/cdc.h USB CYPRESS C67X00 DRIVER M: Peter Korsgaard @@ -8172,6 +8242,7 @@ S: Maintained F: Documentation/vfio.txt F: drivers/vfio/ F: include/linux/vfio.h +F: include/uapi/linux/vfio.h VIDEOBUF2 FRAMEWORK M: Pawel Osciak @@ -8188,6 +8259,7 @@ L: virtualization@lists.linux-foundation.org S: Maintained F: drivers/char/virtio_console.c F: include/linux/virtio_console.h +F: include/uapi/linux/virtio_console.h VIRTIO CORE, NET AND BLOCK DRIVERS M: Rusty Russell @@ -8206,7 +8278,7 @@ L: virtualization@lists.linux-foundation.org L: netdev@vger.kernel.org S: Maintained F: drivers/vhost/ -F: include/linux/vhost.h +F: include/uapi/linux/vhost.h VIA RHINE NETWORK DRIVER M: Roger Luethi @@ -8346,6 +8418,7 @@ S: Maintained F: Documentation/watchdog/ F: drivers/watchdog/ F: include/linux/watchdog.h +F: include/uapi/linux/watchdog.h WD7000 SCSI DRIVER M: Miroslav Zagorac @@ -8371,9 +8444,9 @@ L: wimax@linuxwimax.org S: Supported W: http://linuxwimax.org F: Documentation/wimax/README.wimax -F: include/linux/wimax.h F: include/linux/wimax/debug.h F: include/net/wimax.h +F: include/uapi/linux/wimax.h F: net/wimax/ WISTRON LAPTOP BUTTON DRIVER @@ -8459,7 +8532,7 @@ F: Documentation/x86/ F: arch/x86/ X86 PLATFORM DRIVERS -M: Matthew Garrett +M: Matthew Garrett L: platform-driver-x86@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git S: Maintained @@ -8491,6 +8564,7 @@ F: drivers/*/xen-*front.c F: drivers/xen/ F: arch/x86/include/asm/xen/ F: include/xen/ +F: include/uapi/xen/ XEN HYPERVISOR ARM M: Stefano Stabellini diff --git a/Makefile b/Makefile index 275b956..253a455 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc4 NAME = Terrified Chipmunk # *DOCUMENTATION* diff --git a/arch/alpha/include/asm/parport.h b/arch/alpha/include/asm/parport.h index c5ee7cb..6abd0af 100644 --- a/arch/alpha/include/asm/parport.h +++ b/arch/alpha/include/asm/parport.h @@ -9,8 +9,8 @@ #ifndef _ASM_AXP_PARPORT_H #define _ASM_AXP_PARPORT_H 1 -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +static int parport_pc_find_isa_ports (int autoirq, int autodma); +static int parport_pc_find_nonpci_ports (int autoirq, int autodma) { return parport_pc_find_isa_ports (autoirq, autodma); } diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index ef75714..edb4e00 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose; * Quirks. */ -static void __devinit quirk_isa_bridge(struct pci_dev *dev) +static void quirk_isa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_ISA << 8; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge); -static void __devinit quirk_cypress(struct pci_dev *dev) +static void quirk_cypress(struct pci_dev *dev) { /* The Notorious Cy82C693 chip. */ @@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress); /* Called for each device after PCI setup is done. */ -static void __devinit pcibios_fixup_final(struct pci_dev *dev) +static void pcibios_fixup_final(struct pci_dev *dev) { unsigned int class = dev->class >> 8; @@ -198,8 +198,7 @@ subsys_initcall(pcibios_init); #ifdef ALPHA_RESTORE_SRM_SETUP static struct pdev_srm_saved_conf *srm_saved_configs; -void __devinit -pdev_save_srm_config(struct pci_dev *dev) +void pdev_save_srm_config(struct pci_dev *dev) { struct pdev_srm_saved_conf *tmp; static int printed = 0; @@ -241,8 +240,7 @@ pci_restore_srm_config(void) } #endif -void __devinit -pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index a41ad90..9603bc2 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -68,7 +68,7 @@ enum ipi_message_type { }; /* Set to a secondary's cpuid when it comes online. */ -static int smp_secondary_alive __devinitdata = 0; +static int smp_secondary_alive = 0; int smp_num_probed; /* Internal processor count */ int smp_num_cpus = 1; /* Number that came online. */ @@ -172,7 +172,7 @@ smp_callin(void) } /* Wait until hwrpb->txrdy is clear for cpu. Return -1 on timeout. */ -static int __devinit +static int wait_for_txrdy (unsigned long cpumask) { unsigned long timeout; @@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus) smp_num_cpus = smp_num_probed; } -void __devinit +void smp_prepare_boot_cpu(void) { } diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 2533db2..5cf4a48 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -303,7 +303,7 @@ titan_late_init(void) } -static int __devinit +static int titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u8 intline; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f95ba14..67874b8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -371,7 +371,6 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select AUTO_ZRELADDR select CLKDEV_LOOKUP select COMMON_CLK @@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973 config ARM_ERRATA_458693 bool "ARM errata: Processor deadlock when a false hazard is created" depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 458693 Cortex-A8 (r2p0) erratum. For very specific sequences of memory operations, it is @@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693 config ARM_ERRATA_460075 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 460075 Cortex-A8 (r2p0) erratum. Any asynchronous access to the L2 cache may encounter a @@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075 config ARM_ERRATA_742230 bool "ARM errata: DMB operation may be faulty" depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 742230 Cortex-A9 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction @@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230 config ARM_ERRATA_742231 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 742231 Cortex-A9 (r2p0..r2p2) erratum. Under certain conditions, specific to the @@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915 config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 743622 Cortex-A9 (r2p*) erratum. Under very rare conditions, a faulty @@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622 config ARM_ERRATA_751472 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM help This option enables the workaround for the 751472 Cortex-A9 (prior to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e44da40..5ebb44f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs +targets += $(dtb-y) endif # *.dtb used to be generated in the directory above. Clean out the diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index cf6c48a..4c0abe8 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -50,17 +50,19 @@ ranges; serial@d0012000 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; + reg-io-width = <4>; status = "disabled"; }; serial@d0012100 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; + reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index c45c7b4..271855a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -34,7 +34,14 @@ reg = <0>; clocks = <&cpuclk 0>; }; - } + + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; + }; soc { pinctrl { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index a2aee57..1c1937d 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -85,5 +85,13 @@ #interrupts-cells = <2>; interrupts = <24>; }; + + ethernet@d0034000 { + compatible = "marvell,armada-370-neta"; + reg = <0xd0034000 0x2500>; + interrupts = <14>; + clocks = <&gateclk 1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index da03a12..4905cf3 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -100,5 +100,13 @@ #interrupts-cells = <2>; interrupts = <24>; }; + + ethernet@d0034000 { + compatible = "marvell,armada-370-neta"; + reg = <0xd0034000 0x2500>; + interrupts = <14>; + clocks = <&gateclk 1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 367aa3f..2e37ef1 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -42,17 +42,19 @@ soc { serial@d0012200 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; + reg-io-width = <4>; status = "disabled"; }; serial@d0012300 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; + reg-io-width = <4>; status = "disabled"; }; @@ -93,14 +95,6 @@ status = "disabled"; }; - ethernet@d0034000 { - compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; - interrupts = <14>; - clocks = <&gateclk 1>; - status = "disabled"; - }; - xor@d0060900 { compatible = "marvell,orion-xor"; reg = <0xd0060900 0x100 diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf4..cb7bcc5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62c..271d4de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 231858f..6b1d4ca 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34..80e29c6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4..3a47cf9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -290,6 +283,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +342,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 2efd9c8..63f2fbc 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -170,7 +170,9 @@ gpio-bank = <8>; }; - pinctrl { + pinctrl@80157000 { + // This is actually the PRCMU base address + reg = <0x80157000 0x2000>; compatible = "stericsson,nmk_pinctrl"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f3f7e9d..42eac1f 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -117,6 +117,7 @@ pinctrl: pinctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; + clocks = <&gate_clk 22>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 46477ac..139b40c 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -32,6 +32,7 @@ cpu@0 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <0>; clocks = <&a9pll>; clock-names = "cpu"; @@ -39,6 +40,7 @@ cpu@1 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <1>; clocks = <&a9pll>; clock-names = "cpu"; @@ -46,6 +48,7 @@ cpu@2 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <2>; clocks = <&a9pll>; clock-names = "cpu"; @@ -53,6 +56,7 @@ cpu@3 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <3>; clocks = <&a9pll>; clock-names = "cpu"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 9b23a82..f634907 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,7 +26,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2e3b6ef..3acf594 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -574,7 +574,7 @@ hdmi { compatible = "samsung,exynos5-hdmi"; - reg = <0x14530000 0x100000>; + reg = <0x14530000 0x70000>; interrupts = <0 95 0>; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 921c83c..81e2c96 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc"; }; spi { diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index a9ae5d3..5927a8d 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -30,33 +30,37 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu@900 { compatible = "arm,cortex-a9"; - reg = <0>; + device_type = "cpu"; + reg = <0x900>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@1 { + cpu@901 { compatible = "arm,cortex-a9"; - reg = <1>; + device_type = "cpu"; + reg = <0x901>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@2 { + cpu@902 { compatible = "arm,cortex-a9"; - reg = <2>; + device_type = "cpu"; + reg = <0x902>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@3 { + cpu@903 { compatible = "arm,cortex-a9"; - reg = <3>; + device_type = "cpu"; + reg = <0x903>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7c43b8e..e7484e4 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -39,17 +39,17 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - led_pin_gpio0_17: led_gpio0_17@0 { + led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -110,7 +110,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio0_17>; + pinctrl-0 = <&led_pin_gpio2_1>; user { label = "green"; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 24731cb..7f67402 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -14,7 +14,7 @@ / { model = "Buglabs i.MX31 Bug 1.x"; - compatible = "fsl,imx31-bug", "fsl,imx31"; + compatible = "buglabs,imx31-bug", "fsl,imx31"; memory { reg = <0x80000000 0x8000000>; /* 128M */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 552aed4..edc3f1e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -492,7 +492,7 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks 87>, <&clks 86>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 9ae2004..4ccea21 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -39,6 +39,7 @@ #size-cells = <0>; interrupts = <32>; clock-frequency = <100000>; + clocks = <&gate_clk 7>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index c0de5a7..cd15452 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -82,4 +82,21 @@ gpios = <&gpio1 16 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 4 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7735cee..110d6cb 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -144,6 +144,7 @@ compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; + clocks = <&gate_clk 3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 63411b0..ed0bc95 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,6 +19,10 @@ interrupts = <11>; }; + watchdog { + compatible = "ti,twl4030-wdt"; + }; + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 9173d11..e57d7e5 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, * %-EINVAL no platform data passed * %0 successful. */ -static int __devinit -__sa1111_probe(struct device *me, struct resource *mem, int irq) +static int __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111_platform_data *pd = me->platform_data; struct sa1111 *sachip; @@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev) #define sa1111_resume NULL #endif -static int __devinit sa1111_probe(struct platform_device *pdev) +static int sa1111_probe(struct platform_device *pdev) { struct resource *mem; int irq; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 0c616d5..a5c3dc3 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev) #define scoop_resume NULL #endif -static int __devinit scoop_probe(struct platform_device *pdev) +static int scoop_probe(struct platform_device *pdev) { struct scoop_dev *devptr; struct scoop_config *inf; @@ -243,7 +243,7 @@ err_ioremap: return ret; } -static int __devexit scoop_remove(struct platform_device *pdev) +static int scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); int ret; @@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev) static struct platform_driver scoop_driver = { .probe = scoop_probe, - .remove = __devexit_p(scoop_remove), + .remove = scoop_remove, .suspend = scoop_suspend, .resume = scoop_resume, .driver = { diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index e4df17c..8f324b9 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq, struct device_node *node) { struct vic_device *v; + int i; if (vic_id >= ARRAY_SIZE(vic_devices)) { printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); @@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq, vic_id++; v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, &vic_irqdomain_ops, v); + /* create an IRQ mapping for each valid IRQ */ + for (i = 0; i < fls(valid_sources); i++) + if (valid_sources & (1 << i)) + irq_create_mapping(v->domain, i); } static void vic_ack_irq(struct irq_data *d) @@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) return -EIO; /* - * Passing -1 as first IRQ makes the simple domain allocate descriptors + * Passing 0 as first IRQ makes the simple domain allocate descriptors */ - __vic_init(regs, -1, ~0, ~0, node); + __vic_init(regs, 0, ~0, ~0, node); return 0; } diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index dbea6f4..2eeff1e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_SUNXI=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index a702fb3..b5bc96c 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -33,9 +33,7 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_I2C=y -CONFIG_I2C_MV64XXX=y +CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_USB_SUPPORT is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a1dc5c0..82ce8d7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -65,6 +65,8 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -132,9 +134,11 @@ CONFIG_POWER_SUPPLY=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_TPS65217=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -170,6 +174,7 @@ CONFIG_SND_DEBUG=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 9b72261..379cf32 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn) * Bug 3 is responsible for the sound DMA grinding to a halt. We now * live with bug 2. */ -static void __devinit pci_fixup_83c553(struct pci_dev *dev) +static void pci_fixup_83c553(struct pci_dev *dev) { /* * Set memory region to start at address 0, and enable IO @@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553); -static void __devinit pci_fixup_unassign(struct pci_dev *dev) +static void pci_fixup_unassign(struct pci_dev *dev) { dev->resource[0].end -= dev->resource[0].start; dev->resource[0].start = 0; @@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F, * if it is the host bridge by marking it as such. These resources are of * no consequence to the PCI layer (they are handled elsewhere). */ -static void __devinit pci_fixup_dec21285(struct pci_dev *dev) +static void pci_fixup_dec21285(struct pci_dev *dev) { int i; @@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d /* * PCI IDE controllers use non-standard I/O port decoding, respect it. */ -static void __devinit pci_fixup_ide_bases(struct pci_dev *dev) +static void pci_fixup_ide_bases(struct pci_dev *dev) { struct resource *r; int i; @@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); /* * Put the DEC21142 to sleep */ -static void __devinit pci_fixup_dec21142(struct pci_dev *dev) +static void pci_fixup_dec21142(struct pci_dev *dev) { pci_write_config_dword(dev, 0x40, 0x80000000); } @@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d * functional. However, The CY82C693U _does not work_ in bus * master mode without locking the PCI bus solid. */ -static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) +static void pci_fixup_cy82c693(struct pci_dev *dev) { if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) { u32 base0, base1; @@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void __devinit pci_fixup_it8152(struct pci_dev *dev) +static void pci_fixup_it8152(struct pci_dev *dev) { int i; /* fixup for ITE 8152 devices */ @@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } -#ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_fixup_bus); -#endif /* * Swizzle the device pin each time we cross a bridge. If a platform does @@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus); * PCI standard swizzle is implemented on plug-in cards and Cardbus based * PCI extenders, so it can not be ignored. */ -static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin) +static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin) { struct pci_sys_data *sys = dev->sysdata; int slot, oldpin = *pin; diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 36d20bd..9b6de8c 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = { .fops = &etb_fops, }; -static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id) +static int etb_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; @@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj, static struct kobj_attribute trace_mode_attr = __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); -static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id) +static int etm_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 9a4f630..5f66206 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) return 0; } -static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) +static void cpu_pmu_init(struct arm_pmu *cpu_pmu) { int cpu; for_each_possible_cpu(cpu) { @@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { /* * PMU platform driver and devicetree bindings. */ -static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = { +static struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, @@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = { {}, }; -static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { +static struct platform_device_id cpu_pmu_plat_device_ids[] = { {.name = "arm-pmu"}, {}, }; @@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { /* * CPU PMU identification and probing. */ -static int __devinit probe_current_pmu(struct arm_pmu *pmu) +static int probe_current_pmu(struct arm_pmu *pmu) { int cpu = get_cpu(); unsigned long cpuid = read_cpuid_id(); @@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu) return ret; } -static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) +static int cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; int (*init_fn)(struct arm_pmu *); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index f3e22ff..041d052 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu) +static int armv6pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->name = "v6"; cpu_pmu->handle_irq = armv6pmu_handle_irq; @@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event) &armv6mpcore_perf_cache_map, 0xFF); } -static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) +static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->name = "v6mpcore"; cpu_pmu->handle_irq = armv6pmu_handle_irq; diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 7d0cce8..4fbc757 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->max_period = (1LLU << 32) - 1; }; -static u32 __devinit armv7_read_num_pmnc_events(void) +static u32 armv7_read_num_pmnc_events(void) { u32 nb_cnt; @@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); cpu_pmu->name = "ARMv7 Cortex-A8"; @@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); cpu_pmu->name = "ARMv7 Cortex-A9"; @@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); cpu_pmu->name = "ARMv7 Cortex-A5"; @@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); cpu_pmu->name = "ARMv7 Cortex-A15"; @@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); cpu_pmu->name = "ARMv7 Cortex-A7"; diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 0c8265e..2b0fe30 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event) &xscale_perf_cache_map, 0xFF); } -static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu) +static int xscale1pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->name = "xscale1"; cpu_pmu->handle_irq = xscale1pmu_handle_irq; @@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) } } -static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu) +static int xscale2pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->name = "xscale2"; cpu_pmu->handle_irq = xscale2pmu_handle_irq; diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 9211e88..6e2f163 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client, return 0; } -static int __devexit cpld_video_remove(struct i2c_client *client) +static int cpld_video_remove(struct i2c_client *client) { cpld_client = NULL; return 0; diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c index f2232ca..abafb92 100644 --- a/arch/arm/mach-davinci/cdce949.c +++ b/arch/arm/mach-davinci/cdce949.c @@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client, return 0; } -static int __devexit cdce_remove(struct i2c_client *client) +static int cdce_remove(struct i2c_client *client) { cdce_i2c_client = NULL; return 0; @@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = { .name = "cdce949", }, .probe = cdce_probe, - .remove = __devexit_p(cdce_remove), + .remove = cdce_remove, .id_table = cdce_id, }; diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 0ef4435..8a275f2 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = { .write = pcie_wr_conf, }; -static void __devinit rc_pci_fixup(struct pci_dev *dev) +static void rc_pci_fixup(struct pci_dev *dev) { /* * Prevent enumeration of root complex. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 91d5b6f..e103c29 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -74,6 +74,8 @@ config SOC_EXYNOS5440 depends on ARCH_EXYNOS5 select ARM_ARCH_TIMER select AUTO_ZRELADDR + select PINCTRL + select PINCTRL_EXYNOS5440 help Enable EXYNOS5440 SoC support diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d6d0dc6..1a89824 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + /* EXYNOS5440 can support only common clock framework */ + + if (soc_is_exynos5440()) + return; + +#ifdef CONFIG_SOC_EXYNOS5250 s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); exynos5_register_clocks(); exynos5_setup_clocks(); +#endif } #define COMBINER_ENABLE_SET 0x0 diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index dc24816..981dc1e 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = { static void highbank_power_off(void) { - hignbank_set_pwr_shutdown(); + highbank_set_pwr_shutdown(); while (1) cpu_do_idle(); diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 7b60fac..f30c528 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu) { flush_cache_all(); - highbank_set_cpu_jump(cpu, secondary_startup); + highbank_set_cpu_jump(cpu, phys_to_virt(0)); highbank_set_core_pwr(); cpu_do_idle(); diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 1129957..4ecc864 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu) static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { + highbank_set_cpu_jump(cpu, secondary_startup); gic_raise_softirq(cpumask_of(cpu), 0); return 0; } @@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void) static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { - int i; - if (scu_base_addr) scu_enable(scu_base_addr); - - /* - * Write the address of secondary startup into the jump table - * The cores are in wfi and wait until they receive a soft interrupt - * and a non-zero value to jump to. Then the secondary CPU branches - * to this address. - */ - for (i = 1; i < max_cpus; i++) - highbank_set_cpu_jump(i, secondary_startup); } struct smp_operations highbank_smp_ops __initdata = { diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 74aa135..04eddb4 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -14,10 +14,12 @@ * this program. If not, see . */ +#include #include #include #include +#include #include #include @@ -26,16 +28,31 @@ static int highbank_suspend_finish(unsigned long val) { + outer_flush_all(); + outer_disable(); + + highbank_set_pwr_suspend(); + cpu_do_idle(); + + highbank_clear_pwr_request(); return 0; } static int highbank_pm_enter(suspend_state_t state) { - hignbank_set_pwr_suspend(); + cpu_pm_enter(); + cpu_cluster_pm_enter(); + highbank_set_cpu_jump(0, cpu_resume); cpu_suspend(0, highbank_suspend_finish); + cpu_cluster_pm_exit(); + cpu_pm_exit(); + + highbank_smc1(0x102, 0x1); + if (scu_base_addr) + scu_enable(scu_base_addr); return 0; } diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index e13e8ea..70af9d1 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void) writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu)); } -static inline void hignbank_set_pwr_suspend(void) +static inline void highbank_clear_core_pwr(void) +{ + int cpu = cpu_logical_map(smp_processor_id()); + if (scu_base_addr) + scu_power_mode(scu_base_addr, SCU_PM_NORMAL); + else + writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu)); +} + +static inline void highbank_set_pwr_suspend(void) { writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_shutdown(void) +static inline void highbank_set_pwr_shutdown(void) { writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_soft_reset(void) +static inline void highbank_set_pwr_soft_reset(void) { writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_hard_reset(void) +static inline void highbank_set_pwr_hard_reset(void) { writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } +static inline void highbank_clear_pwr_request(void) +{ + writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_clear_core_pwr(); +} + #endif diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index aed96ad..37d8384 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -22,9 +22,9 @@ void highbank_restart(char mode, const char *cmd) { if (mode == 'h') - hignbank_set_pwr_hard_reset(); + highbank_set_pwr_hard_reset(); else - hignbank_set_pwr_soft_reset(); + highbank_set_pwr_soft_reset(); while (1) cpu_do_idle(); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 1ad0d76..3e628fd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -841,8 +841,6 @@ config SOC_IMX6Q select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select ARM_ERRATA_743622 - select ARM_ERRATA_751472 select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index 36e8b39..d8c75c3 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = { .name = "imx", }; -static int __devinit mxc_cpufreq_driver_init(void) +static int mxc_cpufreq_driver_init(void) { return cpufreq_register_driver(&mxc_driver); } diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index c461e98..7a9686a 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -21,7 +21,7 @@ #define BP_MMDC_MAPSR_PSD 0 #define BP_MMDC_MAPSR_PSS 4 -static int __devinit imx_mmdc_probe(struct platform_device *pdev) +static int imx_mmdc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; void __iomem *mmdc_base, *reg; diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 2f28018..9082b84 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* Scan an IOP13XX PCI bus. nr selects which ATU we use. */ -struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys) { int which_atu; struct pci_bus *bus = NULL; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index ff4150a..de4fd2b 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add(NULL, "mv643xx_eth_port.1", of_clk_get_from_provider(&clkspec)); + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", + of_clk_get_from_provider(&clkspec)); + } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c index 15e69fc..23d2dd1 100644 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = { 0 }; -#define TOPKICK_SATA0_PWR_ENABLE 36 - void __init usi_topkick_init(void) { /* @@ -73,8 +71,6 @@ void __init usi_topkick_init(void) */ kirkwood_mpp_conf(topkick_mpp_config); - /* SATA0 power enable */ - gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); kirkwood_ge00_init(&topkick_ge00_data); kirkwood_sdio_init(&topkick_mvsdio_data); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ef10264..a1c3ab6 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on * the device. Decoding setup is handled by the orion code. */ -static void __devinit rc_pci_fixup(struct pci_dev *dev) +static void rc_pci_fixup(struct pci_dev *dev) { if (dev->bus->parent == NULL && dev->devfn == 0) { int i; diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 255502d..b0c306c 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = { }, }; -static void __devinit acs5k_i2c_init(void) +static void acs5k_i2c_init(void) { /* The gpio interface */ platform_device_register(&acs5k_i2c_device); diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index a6c08ed..bf5e649 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name) } EXPORT_SYMBOL(sram_get_gpool); -static int __devinit sram_probe(struct platform_device *pdev) +static int sram_probe(struct platform_device *pdev) { struct sram_platdata *pdata = pdev->dev.platform_data; struct sram_bank_info *info; @@ -125,7 +125,7 @@ out: return ret; } -static int __devexit sram_remove(struct platform_device *pdev) +static int sram_remove(struct platform_device *pdev) { struct sram_bank_info *info; diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 8f1eecd..507f5ca 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __devinit proc_comm_boot_wait(void) +void proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c index c5a2edd..b1588a1 100644 --- a/arch/arm/mach-msm/smd.c +++ b/arch/arm/mach-msm/smd.c @@ -988,7 +988,7 @@ int smd_core_init(void) return 0; } -static int __devinit msm_smd_probe(struct platform_device *pdev) +static int msm_smd_probe(struct platform_device *pdev) { /* * If we haven't waited for the ARM9 to boot up till now, diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index a9a154a..ee8c0b5 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = { .write = pcie_wr_conf, }; -static void __devinit rc_pci_fixup(struct pci_dev *dev) +static void rc_pci_fixup(struct pci_dev *dev) { /* * Prevent enumeration of root complex. diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 98167a4..9f19069 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index b549d05..215f8cd 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -22,49 +22,49 @@ #include -#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */ +#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ /* * Interrupt numbers generic for all Nomadik Chip cuts */ -#define IRQ_WATCHDOG 1 -#define IRQ_SOFTINT 2 -#define IRQ_CRYPTO 3 -#define IRQ_OWM 4 -#define IRQ_MTU0 5 -#define IRQ_MTU1 6 -#define IRQ_GPIO0 7 -#define IRQ_GPIO1 8 -#define IRQ_GPIO2 9 -#define IRQ_GPIO3 10 -#define IRQ_RTC_RTT 11 -#define IRQ_SSP 12 -#define IRQ_UART0 13 -#define IRQ_DMA1 14 -#define IRQ_CLCD_MDIF 15 -#define IRQ_DMA0 16 -#define IRQ_PWRFAIL 17 -#define IRQ_UART1 18 -#define IRQ_FIRDA 19 -#define IRQ_MSP0 20 -#define IRQ_I2C0 21 -#define IRQ_I2C1 22 -#define IRQ_SDMMC 23 -#define IRQ_USBOTG 24 -#define IRQ_SVA_IT0 25 -#define IRQ_SVA_IT1 26 -#define IRQ_SAA_IT0 27 -#define IRQ_SAA_IT1 28 -#define IRQ_UART2 29 -#define IRQ_MSP2 30 -#define IRQ_L2CC 49 -#define IRQ_HPI 50 -#define IRQ_SKE 51 -#define IRQ_KP 52 -#define IRQ_MEMST 55 -#define IRQ_SGA_IT 59 -#define IRQ_USBM 61 -#define IRQ_MSP1 63 +#define IRQ_WATCHDOG (IRQ_VIC_START+0) +#define IRQ_SOFTINT (IRQ_VIC_START+1) +#define IRQ_CRYPTO (IRQ_VIC_START+2) +#define IRQ_OWM (IRQ_VIC_START+3) +#define IRQ_MTU0 (IRQ_VIC_START+4) +#define IRQ_MTU1 (IRQ_VIC_START+5) +#define IRQ_GPIO0 (IRQ_VIC_START+6) +#define IRQ_GPIO1 (IRQ_VIC_START+7) +#define IRQ_GPIO2 (IRQ_VIC_START+8) +#define IRQ_GPIO3 (IRQ_VIC_START+9) +#define IRQ_RTC_RTT (IRQ_VIC_START+10) +#define IRQ_SSP (IRQ_VIC_START+11) +#define IRQ_UART0 (IRQ_VIC_START+12) +#define IRQ_DMA1 (IRQ_VIC_START+13) +#define IRQ_CLCD_MDIF (IRQ_VIC_START+14) +#define IRQ_DMA0 (IRQ_VIC_START+15) +#define IRQ_PWRFAIL (IRQ_VIC_START+16) +#define IRQ_UART1 (IRQ_VIC_START+17) +#define IRQ_FIRDA (IRQ_VIC_START+18) +#define IRQ_MSP0 (IRQ_VIC_START+19) +#define IRQ_I2C0 (IRQ_VIC_START+20) +#define IRQ_I2C1 (IRQ_VIC_START+21) +#define IRQ_SDMMC (IRQ_VIC_START+22) +#define IRQ_USBOTG (IRQ_VIC_START+23) +#define IRQ_SVA_IT0 (IRQ_VIC_START+24) +#define IRQ_SVA_IT1 (IRQ_VIC_START+25) +#define IRQ_SAA_IT0 (IRQ_VIC_START+26) +#define IRQ_SAA_IT1 (IRQ_VIC_START+27) +#define IRQ_UART2 (IRQ_VIC_START+28) +#define IRQ_MSP2 (IRQ_VIC_START+29) +#define IRQ_L2CC (IRQ_VIC_START+30) +#define IRQ_HPI (IRQ_VIC_START+31) +#define IRQ_SKE (IRQ_VIC_START+32) +#define IRQ_KP (IRQ_VIC_START+33) +#define IRQ_MEMST (IRQ_VIC_START+34) +#define IRQ_SGA_IT (IRQ_VIC_START+35) +#define IRQ_USBM (IRQ_VIC_START+36) +#define IRQ_MSP1 (IRQ_VIC_START+37) #define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index f0e69cb..222d58c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ - serial.o devices.o dma.o + serial.o devices.o dma.o fb.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index a8fce3c..2e98a3a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config = { +static struct omap_usb_config ams_delta_usb_config __initdata = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c new file mode 100644 index 0000000..c770d45 --- /dev/null +++ b/arch/arm/mach-omap1/fb.c @@ -0,0 +1,80 @@ +/* + * File: arch/arm/plat-omap/fb.c + * + * Framebuffer device registration for TI OMAP platforms + * + * Copyright (C) 2006 Nokia Corporation + * Author: Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +static bool omapfb_lcd_configured; +static struct omapfb_platform_data omapfb_config; + +static u64 omap_fb_dma_mask = ~(u32)0; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &omapfb_config, + }, + .num_resources = 0, +}; + +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) +{ + omapfb_config.lcd = *config; + omapfb_lcd_configured = true; +} + +static int __init omap_init_fb(void) +{ + /* + * If the board file has not set the lcd config with + * omapfb_set_lcd_config(), don't bother registering the omapfb device + */ + if (!omapfb_lcd_configured) + return 0; + + return platform_device_register(&omap_fb_device); +} + +arch_initcall(omap_init_fb); + +#else + +void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) +{ +} + +#endif diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index e962926..efc8f20 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = { static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; -static int __devinit omap1_mbox_probe(struct platform_device *pdev) +static int omap1_mbox_probe(struct platform_device *pdev) { struct resource *mem; int ret; @@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev) return 0; } -static int __devexit omap1_mbox_remove(struct platform_device *pdev) +static int omap1_mbox_remove(struct platform_device *pdev) { omap_mbox_unregister(); iounmap(mbox_base); @@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev) static struct platform_driver omap1_mbox_driver = { .probe = omap1_mbox_probe, - .remove = __devexit_p(omap1_mbox_remove), + .remove = omap1_mbox_remove, .driver = { .name = "omap-mailbox", }, diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 104fed3..1a1db59 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) static inline void omap_1510_usb_init(struct omap_usb_config *config) {} #endif -void __init omap1_usb_init(struct omap_usb_config *pdata) +void __init omap1_usb_init(struct omap_usb_config *_pdata) { + struct omap_usb_config *pdata; + + pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return; + pdata->usb0_init = omap1_usb0_init; pdata->usb1_init = omap1_usb1_init; pdata->usb2_init = omap1_usb2_init; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a8004f3..947cafe 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ +obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o sram.o diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index bdf3948..6ef8758 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = { .recalc_rate = &omap2_clksel_recalc, .get_parent = &omap2_clksel_find_parent_index, .set_parent = &omap2_clksel_set_parent, + .enable = &omap2_clkops_enable_clkdm, + .disable = &omap2_clkops_disable_clkdm, }; static struct clk emu_src_ck; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 3d944d3..e6c3281 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -234,7 +234,7 @@ #define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) #define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) -/* 34xx GENERAL_WKUP regist offsets */ +/* 34xx GENERAL_WKUP register offsets */ #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ 0x008 + (i)) #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 2bb1883..0a02aab 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -504,8 +504,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!cpu_is_omap44xx() && !cpu_is_omap3630()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - if (!freqsel) - WARN_ON(1); + WARN_ON(!freqsel); } pr_debug("%s: %s: set rate: locking rate to %lu.\n", diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index fce5aa3..4c7566c 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -27,7 +27,6 @@ #include "omap_device.h" #include "omap_hwmod.h" -#include #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 679a047..4be5cfc 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -31,8 +31,7 @@ #include