--- Documentation/DocBook/media/v4l/pixfmt.xml | 4 Documentation/DocBook/media/v4l/v4l2.xml | 2 Documentation/DocBook/media/v4l/vidioc-create-bufs.xml | 5 Documentation/DocBook/media/v4l/vidioc-dqevent.xml | 2 Documentation/stable_kernel_rules.txt | 6 Makefile | 2 arch/arm/mach-exynos/Kconfig | 8 arch/arm/mach-imx/clk-imx6q.c | 6 arch/arm/mach-omap2/board-flash.c | 5 arch/arm/mach-omap2/clock44xx_data.c | 5 arch/arm/mach-shmobile/board-armadillo800eva.c | 1 arch/arm/mach-shmobile/board-kzm9d.c | 1 arch/arm/mach-shmobile/board-kzm9g.c | 1 arch/arm/mach-shmobile/board-mackerel.c | 3 arch/arm/mach-shmobile/clock-sh73a0.c | 8 arch/arm/mach-shmobile/intc-r8a7779.c | 7 arch/arm/mach-shmobile/platsmp.c | 5 arch/arm/mach-shmobile/setup-sh7372.c | 2 arch/arm/mm/dma-mapping.c | 2 arch/arm/plat-mxc/include/mach/mx2_cam.h | 2 arch/arm/plat-samsung/include/plat/map-s3c.h | 2 arch/arm/plat-samsung/include/plat/watchdog-reset.h | 2 arch/m68k/platform/coldfire/clk.c | 7 arch/powerpc/include/asm/hw_irq.h | 5 arch/powerpc/kernel/entry_64.S | 97 ++--- arch/powerpc/kernel/irq.c | 2 arch/powerpc/kernel/prom_init.c | 4 arch/powerpc/mm/numa.c | 2 arch/powerpc/net/bpf_jit_64.S | 2 arch/powerpc/platforms/pseries/iommu.c | 4 arch/powerpc/platforms/pseries/processor_idle.c | 2 arch/sh/boards/mach-kfr2r09/setup.c | 4 arch/sh/drivers/pci/pcie-sh7786.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 2 arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 2 arch/sh/kernel/cpu/sh4a/clock-shx3.c | 2 arch/x86/ia32/ia32_signal.c | 2 arch/x86/include/asm/cpufeature.h | 2 arch/x86/kernel/acpi/boot.c | 27 - arch/x86/kernel/cpu/mkcapflags.pl | 25 + arch/x86/kernel/cpu/scattered.c | 2 arch/x86/kernel/kgdb.c | 8 arch/x86/kernel/reboot.c | 8 arch/x86/lib/csum-wrappers_64.c | 2 drivers/acpi/acpi_pad.c | 7 drivers/acpi/apei/apei-base.c | 17 drivers/acpi/apei/apei-internal.h | 9 drivers/acpi/apei/ghes.c | 6 drivers/acpi/processor_idle.c | 32 + drivers/acpi/sysfs.c | 4 drivers/acpi/video.c | 2 drivers/base/power/main.c | 6 drivers/bluetooth/ath3k.c | 3 drivers/bluetooth/btmrvl_drv.h | 2 drivers/bluetooth/btmrvl_main.c | 14 drivers/bluetooth/btmrvl_sdio.c | 8 drivers/bluetooth/btusb.c | 2 drivers/clk/clk.c | 26 - drivers/clk/mxs/clk-imx23.c | 12 drivers/clk/mxs/clk-imx28.c | 32 - drivers/clk/spear/spear6xx_clock.c | 2 drivers/gpu/drm/i915/i915_irq.c | 1 drivers/gpu/drm/i915/i915_suspend.c | 5 drivers/gpu/drm/i915/intel_display.c | 16 drivers/gpu/drm/nouveau/nouveau_fbcon.c | 2 drivers/gpu/drm/nouveau/nouveau_prime.c | 23 + drivers/gpu/drm/udl/udl_main.c | 2 drivers/hid/Kconfig | 43 +- drivers/hid/hid-core.c | 1 drivers/hid/hid-ids.h | 3 drivers/hid/hid-logitech-dj.c | 38 +- drivers/hid/hid-magicmouse.c | 6 drivers/hid/usbhid/Kconfig | 8 drivers/hwmon/applesmc.c | 2 drivers/hwmon/coretemp.c | 4 drivers/hwmon/jc42.c | 2 drivers/hwmon/lineage-pem.c | 2 drivers/hwmon/ltc4261.c | 2 drivers/hwmon/max16065.c | 2 drivers/media/common/saa7146_fops.c | 5 drivers/media/dvb/frontends/cx24110.c | 4 drivers/media/dvb/frontends/cxd2820r_c.c | 2 drivers/media/dvb/frontends/lg2160.c | 2 drivers/media/dvb/siano/smsusb.c | 2 drivers/media/radio/radio-maxiradio.c | 2 drivers/media/radio/radio-sf16fmr2.c | 2 drivers/media/radio/si470x/radio-si470x-usb.c | 2 drivers/media/video/bt8xx/bttv-cards.c | 84 ---- drivers/media/video/bt8xx/bttv-driver.c | 5 drivers/media/video/bt8xx/bttv.h | 1 drivers/media/video/bt8xx/bttvp.h | 1 drivers/media/video/bw-qcam.c | 47 ++ drivers/media/video/cx18/cx18-driver.c | 10 drivers/media/video/cx18/cx18-driver.h | 2 drivers/media/video/cx18/cx18-firmware.c | 9 drivers/media/video/cx18/cx18-mailbox.c | 15 drivers/media/video/cx88/cx88-blackbird.c | 2 drivers/media/video/em28xx/em28xx-cards.c | 1 drivers/media/video/em28xx/em28xx-input.c | 2 drivers/media/video/gspca/gspca.c | 4 drivers/media/video/gspca/ov534.c | 32 - drivers/media/video/gspca/ov534_9.c | 1 drivers/media/video/gspca/pac7311.c | 2 drivers/media/video/gspca/sn9c20x.c | 24 - drivers/media/video/gspca/sonixj.c | 2 drivers/media/video/ivtv/ivtv-driver.c | 18 - drivers/media/video/ivtv/ivtv-driver.h | 2 drivers/media/video/mem2mem_testdev.c | 50 +- drivers/media/video/mx2_camera.c | 52 -- drivers/media/video/s5p-fimc/fimc-core.c | 2 drivers/media/video/s5p-mfc/regs-mfc.h | 5 drivers/media/video/s5p-mfc/s5p_mfc_dec.c | 4 drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 12 drivers/media/video/s5p-mfc/s5p_mfc_opr.h | 4 drivers/media/video/s5p-mfc/s5p_mfc_shm.h | 3 drivers/media/video/smiapp/Kconfig | 2 drivers/media/video/smiapp/smiapp-core.c | 1 drivers/media/video/tuner-core.c | 2 drivers/media/video/v4l2-dev.c | 4 drivers/media/video/v4l2-ioctl.c | 1 drivers/media/video/vino.c | 4 drivers/media/video/vivi.c | 6 drivers/mmc/card/block.c | 14 drivers/mmc/host/omap_hsmmc.c | 15 drivers/mtd/ubi/debug.c | 8 drivers/net/bonding/bond_procfs.c | 15 drivers/net/caif/caif_hsi.c | 5 drivers/net/can/c_can/c_can.c | 4 drivers/net/can/flexcan.c | 4 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 8 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 54 +-- drivers/net/ethernet/emulex/benet/be_cmds.c | 12 drivers/net/ethernet/emulex/benet/be_cmds.h | 2 drivers/net/ethernet/emulex/benet/be_main.c | 2 drivers/net/ethernet/intel/Kconfig | 10 drivers/net/ethernet/intel/igb/e1000_82575.c | 2 drivers/net/ethernet/intel/ixgbe/ixgbe.h | 4 drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 2 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 16 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 13 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 18 - drivers/net/ethernet/mellanox/mlx4/main.c | 2 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 drivers/net/ethernet/realtek/r8169.c | 1 drivers/net/ethernet/renesas/sh_eth.c | 12 drivers/net/phy/micrel.c | 8 drivers/net/usb/ipheth.c | 5 drivers/net/usb/qmi_wwan.c | 83 ++-- drivers/net/usb/usbnet.c | 51 +- drivers/net/wireless/airo.c | 4 drivers/net/wireless/ath/ath5k/base.c | 4 drivers/net/wireless/ath/ath9k/ath9k.h | 1 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 drivers/net/wireless/ath/ath9k/hw.c | 14 drivers/net/wireless/ath/ath9k/main.c | 27 - drivers/net/wireless/ath/ath9k/xmit.c | 31 + drivers/net/wireless/iwlwifi/iwl-debugfs.c | 6 drivers/net/wireless/mwifiex/cfg80211.c | 25 - drivers/net/wireless/mwifiex/txrx.c | 10 drivers/net/wireless/mwifiex/uap_cmd.c | 11 drivers/net/wireless/rndis_wlan.c | 2 drivers/net/wireless/ti/wl1251/acx.c | 2 drivers/net/wireless/ti/wl1251/event.c | 3 drivers/net/wireless/ti/wl1251/spi.c | 4 drivers/net/xen-netfront.c | 8 drivers/oprofile/oprofile_perf.c | 2 drivers/regulator/palmas-regulator.c | 7 drivers/regulator/tps65023-regulator.c | 2 drivers/regulator/tps6524x-regulator.c | 2 drivers/scsi/sd.c | 2 drivers/staging/media/lirc/lirc_serial.c | 6 drivers/usb/Makefile | 2 drivers/usb/dwc3/gadget.c | 3 drivers/usb/gadget/fsl_qe_udc.h | 4 drivers/usb/gadget/lpc32xx_udc.c | 1 drivers/usb/musb/musb_host.c | 14 drivers/usb/otg/twl6030-usb.c | 15 drivers/usb/phy/Kconfig | 4 drivers/usb/serial/cp210x.c | 11 drivers/usb/serial/option.c | 8 drivers/usb/storage/scsiglue.c | 6 drivers/usb/storage/unusual_devs.h | 7 drivers/vhost/vhost.c | 3 drivers/watchdog/hpwdt.c | 4 drivers/watchdog/iTCO_wdt.c | 1 drivers/watchdog/watchdog_dev.c | 2 fs/ubifs/debug.c | 8 fs/ubifs/find.c | 4 fs/udf/super.c | 102 +++-- include/asm-generic/bug.h | 19 - include/linux/irq.h | 2 include/linux/skbuff.h | 7 include/linux/videodev2.h | 6 include/net/bluetooth/hci.h | 6 include/net/mac80211.h | 6 include/net/phonet/gprs.h | 2 include/scsi/scsi_device.h | 1 include/sound/tea575x-tuner.h | 3 kernel/printk.c | 299 ++++++++++++----- kernel/rcutree.c | 14 net/9p/protocol.c | 2 net/batman-adv/routing.c | 2 net/batman-adv/translation-table.c | 12 net/bluetooth/hci_event.c | 48 ++ net/bluetooth/hidp/Kconfig | 2 net/bluetooth/l2cap_core.c | 21 - net/bluetooth/mgmt.c | 20 + net/bluetooth/smp.c | 11 net/bridge/br_if.c | 1 net/bridge/br_netlink.c | 2 net/bridge/br_private.h | 1 net/caif/caif_dev.c | 3 net/caif/caif_socket.c | 1 net/can/raw.c | 3 net/core/dev.c | 23 - net/ipv6/ip6_fib.c | 4 net/ipv6/route.c | 41 +- net/ipv6/tcp_ipv6.c | 3 net/iucv/af_iucv.c | 1 net/l2tp/l2tp_eth.c | 45 +- net/mac80211/cfg.c | 3 net/mac80211/mlme.c | 4 net/mac80211/sta_info.h | 5 net/mac802154/tx.c | 3 net/phonet/af_phonet.c | 4 net/phonet/datagram.c | 4 net/phonet/pep-gprs.c | 2 net/phonet/pep.c | 2 net/phonet/pn_dev.c | 4 net/phonet/pn_netlink.c | 4 net/phonet/socket.c | 4 net/phonet/sysctl.c | 2 net/sctp/protocol.c | 2 net/wireless/reg.c | 2 net/wireless/util.c | 2 sound/i2c/other/tea575x-tuner.c | 21 - sound/pci/es1968.c | 2 sound/pci/fm801.c | 4 sound/pci/hda/Kconfig | 13 sound/pci/hda/hda_auto_parser.c | 1 sound/pci/hda/hda_auto_parser.h | 10 sound/pci/hda/hda_codec.c | 4 sound/pci/hda/patch_conexant.c | 6 sound/pci/hda/patch_realtek.c | 15 sound/pci/hda/patch_sigmatel.c | 7 sound/soc/codecs/wm8994.c | 3 sound/usb/mixer_maps.c | 8 sound/usb/quirks-table.h | 30 + 256 files changed, 1563 insertions(+), 1060 deletions(-) Index: linux-3.5-rc1/Documentation/DocBook/media/v4l/pixfmt.xml =================================================================== --- linux-3.5-rc1.orig/Documentation/DocBook/media/v4l/pixfmt.xml +++ linux-3.5-rc1/Documentation/DocBook/media/v4l/pixfmt.xml @@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/< V4L2_PIX_FMT_Y4 'Y04 ' - Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used, + Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used, the other bits are set to 0. V4L2_PIX_FMT_Y6 'Y06 ' - Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used, + Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used, the other bits are set to 0. Index: linux-3.5-rc1/Documentation/DocBook/media/v4l/v4l2.xml =================================================================== --- linux-3.5-rc1.orig/Documentation/DocBook/media/v4l/v4l2.xml +++ linux-3.5-rc1/Documentation/DocBook/media/v4l/v4l2.xml @@ -560,6 +560,7 @@ and discussions on the V4L mailing list. &sub-g-tuner; &sub-log-status; &sub-overlay; + &sub-prepare-buf; &sub-qbuf; &sub-querybuf; &sub-querycap; @@ -567,7 +568,6 @@ and discussions on the V4L mailing list. &sub-query-dv-preset; &sub-query-dv-timings; &sub-querystd; - &sub-prepare-buf; &sub-reqbufs; &sub-s-hw-freq-seek; &sub-streamon; Index: linux-3.5-rc1/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml =================================================================== --- linux-3.5-rc1.orig/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml +++ linux-3.5-rc1/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -108,10 +108,9 @@ information. /> - __u32 + struct v4l2_format format - Filled in by the application, preserved by the driver. - See . + Filled in by the application, preserved by the driver. __u32 Index: linux-3.5-rc1/Documentation/DocBook/media/v4l/vidioc-dqevent.xml =================================================================== --- linux-3.5-rc1.orig/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ linux-3.5-rc1/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -89,7 +89,7 @@ &v4l2-event-frame-sync; - frame + frame_sync Event data for event V4L2_EVENT_FRAME_SYNC. Index: linux-3.5-rc1/Documentation/stable_kernel_rules.txt =================================================================== --- linux-3.5-rc1.orig/Documentation/stable_kernel_rules.txt +++ linux-3.5-rc1/Documentation/stable_kernel_rules.txt @@ -12,6 +12,12 @@ Rules on what kind of patches are accept marked CONFIG_BROKEN), an oops, a hang, data corruption, a real security issue, or some "oh, that's not good" issue. In short, something critical. + - Serious issues as reported by a user of a distribution kernel may also + be considered if they fix a notable performance or interactivity issue. + As these fixes are not as obvious and have a higher risk of a subtle + regression they should only be submitted by a distribution kernel + maintainer and include an addendum linking to a bugzilla entry if it + exists and additional information on the user-visible impact. - New device IDs and quirks are also accepted. - No "theoretical race condition" issues, unless an explanation of how the race can be exploited is also provided. Index: linux-3.5-rc1/Makefile =================================================================== --- linux-3.5-rc1.orig/Makefile +++ linux-3.5-rc1/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 5 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* Index: linux-3.5-rc1/arch/arm/mach-exynos/Kconfig =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-exynos/Kconfig +++ linux-3.5-rc1/arch/arm/mach-exynos/Kconfig @@ -212,7 +212,7 @@ config MACH_SMDKV310 select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +303,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -341,7 +341,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI Index: linux-3.5-rc1/arch/arm/mach-imx/clk-imx6q.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-imx/clk-imx6q.c +++ linux-3.5-rc1/arch/arm/mach-imx/clk-imx6q.c @@ -152,13 +152,14 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, + clk_max }; static struct clk *clk[clk_max]; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, mmdc_ch1_axi, + mmdc_ch0_axi, rom, }; int __init mx6q_clocks_init(void) @@ -364,6 +365,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); Index: linux-3.5-rc1/arch/arm/mach-omap2/board-flash.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-omap2/board-flash.c +++ linux-3.5-rc1/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_par gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ Index: linux-3.5-rc1/arch/arm/mach-omap2/clock44xx_data.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-omap2/clock44xx_data.c +++ linux-3.5-rc1/arch/arm/mach-omap2/clock44xx_data.c @@ -3417,9 +3417,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } Index: linux-3.5-rc1/arch/arm/mach-shmobile/board-armadillo800eva.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/board-armadillo800eva.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "ar .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, MACHINE_END Index: linux-3.5-rc1/arch/arm/mach-shmobile/board-kzm9d.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/board-kzm9d.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/board-kzm9d.c @@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END Index: linux-3.5-rc1/arch/arm/mach-shmobile/board-kzm9g.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/board-kzm9g.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/board-kzm9g.c @@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END Index: linux-3.5-rc1/arch/arm/mach-shmobile/board-mackerel.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/board-mackerel.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/board-mackerel.c @@ -1512,6 +1512,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* SDHI0 PORT172 card-detect IRQ26 */ + gpio_request(GPIO_FN_IRQ26_172, NULL); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); Index: linux-3.5-rc1/arch/arm/mach-shmobile/clock-sh73a0.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/clock-sh73a0.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, + MSTP219, MSTP218, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ Index: linux-3.5-rc1/arch/arm/mach-shmobile/intc-r8a7779.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/intc-r8a7779.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/intc-r8a7779.c @@ -35,6 +35,9 @@ #define INT2SMSKCR3 0xfe7822ac #define INT2SMSKCR4 0xfe7822b0 +#define INT2NTSR0 0xfe700060 +#define INT2NTSR1 0xfe700064 + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ @@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void) gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; + /* route all interrupts to ARM */ + __raw_writel(0xffffffff, INT2NTSR0); + __raw_writel(0x3fffffff, INT2NTSR1); + /* unmask all known interrupts in INTCS2 */ __raw_writel(0xfffffff0, INT2SMSKCR0); __raw_writel(0xfff7ffff, INT2SMSKCR1); Index: linux-3.5-rc1/arch/arm/mach-shmobile/platsmp.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/platsmp.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/platsmp.c @@ -25,7 +25,12 @@ #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) #define is_r8a7779() machine_is_marzen() + +#ifdef CONFIG_ARCH_EMEV2 #define is_emev2() of_machine_is_compatible("renesas,emev2") +#else +#define is_emev2() (0) +#endif static unsigned int __init shmobile_smp_get_core_count(void) { Index: linux-3.5-rc1/arch/arm/mach-shmobile/setup-sh7372.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mach-shmobile/setup-sh7372.c +++ linux-3.5-rc1/arch/arm/mach-shmobile/setup-sh7372.c @@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config }, }; -#define SH7372_CHCLR 0x220 +#define SH7372_CHCLR (0x220 - 0x20) static const struct sh_dmae_channel sh7372_dmae_channels[] = { { Index: linux-3.5-rc1/arch/arm/mm/dma-mapping.c =================================================================== --- linux-3.5-rc1.orig/arch/arm/mm/dma-mapping.c +++ linux-3.5-rc1/arch/arm/mm/dma-mapping.c @@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffe return NULL; while (count) { - int j, order = __ffs(count); + int j, order = __fls(count); pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); while (!pages[i] && order) Index: linux-3.5-rc1/arch/arm/plat-mxc/include/mach/mx2_cam.h =================================================================== --- linux-3.5-rc1.orig/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ linux-3.5-rc1/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,6 +23,7 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ +#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -30,6 +31,7 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera Index: linux-3.5-rc1/arch/arm/plat-samsung/include/plat/map-s3c.h =================================================================== --- linux-3.5-rc1.orig/arch/arm/plat-samsung/include/plat/map-s3c.h +++ linux-3.5-rc1/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -22,7 +22,7 @@ #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART Index: linux-3.5-rc1/arch/arm/plat-samsung/include/plat/watchdog-reset.h =================================================================== --- linux-3.5-rc1.orig/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ linux-3.5-rc1/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - if (s3c2410_wdtclk) + if (!IS_ERR(s3c2410_wdtclk)) clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ Index: linux-3.5-rc1/arch/m68k/platform/coldfire/clk.c =================================================================== --- linux-3.5-rc1.orig/arch/m68k/platform/coldfire/clk.c +++ linux-3.5-rc1/arch/m68k/platform/coldfire/clk.c @@ -42,4 +42,11 @@ unsigned long clk_get_rate(struct clk *c return MCF_CLK; } EXPORT_SYMBOL(clk_get_rate); + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(devm_clk_get); + /***************************************************************************/ Index: linux-3.5-rc1/arch/powerpc/include/asm/hw_irq.h =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/include/asm/hw_irq.h +++ linux-3.5-rc1/arch/powerpc/include/asm/hw_irq.h @@ -103,6 +103,11 @@ static inline void hard_irq_disable(void /* include/linux/interrupt.h needs hard_irq_disable to be a macro */ #define hard_irq_disable hard_irq_disable +static inline bool lazy_irq_pending(void) +{ + return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS); +} + /* * This is called by asynchronous interrupts to conditionally * re-enable hard interrupts when soft-disabled after having Index: linux-3.5-rc1/arch/powerpc/kernel/entry_64.S =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/kernel/entry_64.S +++ linux-3.5-rc1/arch/powerpc/kernel/entry_64.S @@ -558,27 +558,54 @@ _GLOBAL(ret_from_except_lite) mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ -#ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ - li r0,_TIF_NEED_RESCHED /* bits to check */ ld r3,_MSR(r1) ld r4,TI_FLAGS(r9) - /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ - rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING - and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ - bne do_work - -#else /* !CONFIG_PREEMPT */ - ld r3,_MSR(r1) /* Returning to user mode? */ andi. r3,r3,MSR_PR - beq restore /* if not, just restore regs and return */ + beq resume_kernel /* Check current_thread_info()->flags */ + andi. r0,r4,_TIF_USER_WORK_MASK + beq restore + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .restore_interrupts + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + bl .restore_interrupts + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_notify_resume + b .ret_from_except + +resume_kernel: +#ifdef CONFIG_PREEMPT + /* Check if we need to preempt */ + andi. r0,r4,_TIF_NEED_RESCHED + beq+ restore + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 + ld r0,SOFTE(r1) + cmpdi r0,0 + crandc eq,cr1*4+eq,eq + bne restore + + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first + */ + SOFT_DISABLE_INTS(r3,r4) +1: bl .preempt_schedule_irq + + /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_USER_WORK_MASK - bne do_work -#endif /* !CONFIG_PREEMPT */ + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b +#endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq fast_exc_return_irq: @@ -759,50 +786,6 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ - - -3: -do_work: -#ifdef CONFIG_PREEMPT - andi. r0,r3,MSR_PR /* Returning to user mode? */ - bne user_work - /* Check that preempt_count() == 0 and interrupts are enabled */ - lwz r8,TI_PREEMPT(r9) - cmpwi cr1,r8,0 - ld r0,SOFTE(r1) - cmpdi r0,0 - crandc eq,cr1*4+eq,eq - bne restore - - /* - * Here we are preempting the current task. We want to make - * sure we are soft-disabled first - */ - SOFT_DISABLE_INTS(r3,r4) -1: bl .preempt_schedule_irq - - /* Re-test flags and eventually loop */ - clrrdi r9,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_NEED_RESCHED - bne 1b - b restore - -user_work: -#endif /* CONFIG_PREEMPT */ - - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - bl .restore_interrupts - bl .schedule - b .ret_from_except_lite - -1: bl .save_nvgprs - bl .restore_interrupts - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_notify_resume - b .ret_from_except - unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl .unrecoverable_exception Index: linux-3.5-rc1/arch/powerpc/kernel/irq.c =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/kernel/irq.c +++ linux-3.5-rc1/arch/powerpc/kernel/irq.c @@ -277,7 +277,7 @@ EXPORT_SYMBOL(arch_local_irq_restore); * NOTE: This is called with interrupts hard disabled but not marked * as such in paca->irq_happened, so we need to resync this. */ -void restore_interrupts(void) +void notrace restore_interrupts(void) { if (irqs_disabled()) { local_paca->irq_happened |= PACA_IRQ_HARD_DIS; Index: linux-3.5-rc1/arch/powerpc/kernel/prom_init.c =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/kernel/prom_init.c +++ linux-3.5-rc1/arch/powerpc/kernel/prom_init.c @@ -1312,7 +1312,7 @@ static struct opal_secondary_data { extern char opal_secondary_entry; -static void prom_query_opal(void) +static void __init prom_query_opal(void) { long rc; @@ -1436,7 +1436,7 @@ static void __init prom_opal_hold_cpus(v prom_debug("prom_opal_hold_cpus: end...\n"); } -static void prom_opal_takeover(void) +static void __init prom_opal_takeover(void) { struct opal_secondary_data *data = &RELOC(opal_secondary_data); struct opal_takeover_args *args = &data->args; Index: linux-3.5-rc1/arch/powerpc/mm/numa.c =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/mm/numa.c +++ linux-3.5-rc1/arch/powerpc/mm/numa.c @@ -635,7 +635,7 @@ static inline int __init read_usm_ranges */ static void __init parse_drconf_memory(struct device_node *memory) { - const u32 *dm, *usm; + const u32 *uninitialized_var(dm), *usm; unsigned int n, rc, ranges, is_kexec_kdump = 0; unsigned long lmb_size, base, size, sz; int nid; Index: linux-3.5-rc1/arch/powerpc/net/bpf_jit_64.S =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/net/bpf_jit_64.S +++ linux-3.5-rc1/arch/powerpc/net/bpf_jit_64.S @@ -105,6 +105,7 @@ sk_load_byte_msh_positive_offset: mr r4, r_addr; \ li r6, SIZE; \ bl skb_copy_bits; \ + nop; \ /* R3 = 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ @@ -156,6 +157,7 @@ bpf_slow_path_byte_msh: mr r4, r_addr; \ li r5, SIZE; \ bl bpf_internal_load_pointer_neg_helper; \ + nop; \ /* R3 != 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ Index: linux-3.5-rc1/arch/powerpc/platforms/pseries/iommu.c =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/platforms/pseries/iommu.c +++ linux-3.5-rc1/arch/powerpc/platforms/pseries/iommu.c @@ -106,7 +106,7 @@ static int tce_build_pSeries(struct iomm tcep++; } - if (tbl->it_type == TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_CREATE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); return 0; } @@ -121,7 +121,7 @@ static void tce_free_pSeries(struct iomm while (npages--) *(tcep++) = 0; - if (tbl->it_type == TCE_PCI_SWINV_FREE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); } Index: linux-3.5-rc1/arch/powerpc/platforms/pseries/processor_idle.c =================================================================== --- linux-3.5-rc1.orig/arch/powerpc/platforms/pseries/processor_idle.c +++ linux-3.5-rc1/arch/powerpc/platforms/pseries/processor_idle.c @@ -106,7 +106,7 @@ static void check_and_cede_processor(voi * we first hard disable then check. */ hard_irq_disable(); - if (get_paca()->irq_happened == 0) + if (!lazy_irq_pending()) cede_processor(); } Index: linux-3.5-rc1/arch/sh/boards/mach-kfr2r09/setup.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/boards/mach-kfr2r09/setup.c +++ linux-3.5-rc1/arch/sh/boards/mach-kfr2r09/setup.c @@ -201,8 +201,8 @@ static struct resource kfr2r09_usb0_gadg .flags = IORESOURCE_MEM, }, [1] = { - .start = evtirq(0xa20), - .end = evtirq(0xa20), + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; Index: linux-3.5-rc1/arch/sh/drivers/pci/pcie-sh7786.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/drivers/pci/pcie-sh7786.c +++ linux-3.5-rc1/arch/sh/drivers/pci/pcie-sh7786.c @@ -239,7 +239,7 @@ static int __init pcie_clk_init(struct s clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR); clk->enable_bit = BITS_CKE; - ret = sh_clk_mstp32_register(clk, 1); + ret = sh_clk_mstp_register(clk, 1); if (unlikely(ret < 0)) goto err_phy; Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7343.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -283,7 +283,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7366.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -276,7 +276,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7722.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -261,7 +261,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7723.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -311,7 +311,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7724.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -375,7 +375,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7734.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7734.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7734.c @@ -260,7 +260,7 @@ int __init arch_clk_init(void) &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7757.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -148,7 +148,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7785.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -175,7 +175,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7786.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -194,7 +194,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-shx3.c =================================================================== --- linux-3.5-rc1.orig/arch/sh/kernel/cpu/sh4a/clock-shx3.c +++ linux-3.5-rc1/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -149,7 +149,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } Index: linux-3.5-rc1/arch/x86/ia32/ia32_signal.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/ia32/ia32_signal.c +++ linux-3.5-rc1/arch/x86/ia32/ia32_signal.c @@ -38,7 +38,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err = 0; - bool ia32 = is_ia32_task(); + bool ia32 = test_thread_flag(TIF_IA32); if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) return -EFAULT; Index: linux-3.5-rc1/arch/x86/include/asm/cpufeature.h =================================================================== --- linux-3.5-rc1.orig/arch/x86/include/asm/cpufeature.h +++ linux-3.5-rc1/arch/x86/include/asm/cpufeature.h @@ -176,7 +176,7 @@ #define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */ #define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ -#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */ +#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ /* Virtualization flags: Linux defined, word 8 */ Index: linux-3.5-rc1/arch/x86/kernel/acpi/boot.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/kernel/acpi/boot.c +++ linux-3.5-rc1/arch/x86/kernel/acpi/boot.c @@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subta return 0; } - if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (intsrc->source_irq == 0) { if (acpi_skip_timer_override) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + printk(PREFIX "BIOS IRQ0 override ignored.\n"); return 0; } - if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); } @@ -1334,17 +1336,12 @@ static int __init dmi_disable_acpi(const } /* - * Force ignoring BIOS IRQ0 pin2 override + * Force ignoring BIOS IRQ0 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - /* - * The ati_ixp4x0_rev() early PCI quirk should have set - * the acpi_skip_timer_override flag already: - */ if (!acpi_skip_timer_override) { - WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + pr_notice("%s detected: Ignoring BIOS IRQ0 override\n", d->ident); acpi_skip_timer_override = 1; } @@ -1438,7 +1435,7 @@ static struct dmi_system_id __initdata a * is enabled. This input is incorrectly designated the * ISA IRQ 0 via an interrupt source override even though * it is wired to the output of the master 8259A and INTIN0 - * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * is not connected at all. Force ignoring BIOS IRQ0 * override in that cases. */ { @@ -1473,6 +1470,14 @@ static struct dmi_system_id __initdata a DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "FUJITSU SIEMENS", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, {} }; Index: linux-3.5-rc1/arch/x86/kernel/cpu/mkcapflags.pl =================================================================== --- linux-3.5-rc1.orig/arch/x86/kernel/cpu/mkcapflags.pl +++ linux-3.5-rc1/arch/x86/kernel/cpu/mkcapflags.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl +#!/usr/bin/perl -w # # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h # @@ -11,22 +11,35 @@ open(OUT, "> $out\0") or die "$0: cannot print OUT "#include \n\n"; print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; +%features = (); +$err = 0; + while (defined($line = )) { if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { $macro = $1; - $feature = $2; + $feature = "\L$2"; $tail = $3; if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { - $feature = $1; + $feature = "\L$1"; } - if ($feature ne '') { - printf OUT "\t%-32s = \"%s\",\n", - "[$macro]", "\L$feature"; + next if ($feature eq ''); + + if ($features{$feature}++) { + print STDERR "$in: duplicate feature name: $feature\n"; + $err++; } + printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature; } } print OUT "};\n"; close(IN); close(OUT); + +if ($err) { + unlink($out); + exit(1); +} + +exit(0); Index: linux-3.5-rc1/arch/x86/kernel/cpu/scattered.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/kernel/cpu/scattered.c +++ linux-3.5-rc1/arch/x86/kernel/cpu/scattered.c @@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_feat const struct cpuid_bit *cb; static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { - { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 }, + { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 }, { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 }, { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 }, { X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 }, Index: linux-3.5-rc1/arch/x86/kernel/kgdb.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/kernel/kgdb.c +++ linux-3.5-rc1/arch/x86/kernel/kgdb.c @@ -444,12 +444,12 @@ void kgdb_roundup_cpus(unsigned long fla /** * kgdb_arch_handle_exception - Handle architecture specific GDB packets. - * @vector: The error vector of the exception that happened. + * @e_vector: The error vector of the exception that happened. * @signo: The signal number of the exception that happened. * @err_code: The error code of the exception that happened. - * @remcom_in_buffer: The buffer of the packet we have read. - * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. - * @regs: The &struct pt_regs of the current process. + * @remcomInBuffer: The buffer of the packet we have read. + * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into. + * @linux_regs: The &struct pt_regs of the current process. * * This function MUST handle the 'c' and 's' command packets, * as well packets to set / remove a hardware breakpoint, if used. Index: linux-3.5-rc1/arch/x86/kernel/reboot.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/kernel/reboot.c +++ linux-3.5-rc1/arch/x86/kernel/reboot.c @@ -451,6 +451,14 @@ static struct dmi_system_id __initdata r DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, + { /* Handle problems with rebooting on the Precision M6600. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + }, + }, { } }; Index: linux-3.5-rc1/arch/x86/lib/csum-wrappers_64.c =================================================================== --- linux-3.5-rc1.orig/arch/x86/lib/csum-wrappers_64.c +++ linux-3.5-rc1/arch/x86/lib/csum-wrappers_64.c @@ -115,7 +115,7 @@ EXPORT_SYMBOL(csum_partial_copy_to_user) * @src: source address * @dst: destination address * @len: number of bytes to be copied. - * @isum: initial sum that is added into the result (32bit unfolded) + * @sum: initial sum that is added into the result (32bit unfolded) * * Returns an 32bit unfolded checksum of the buffer. */ Index: linux-3.5-rc1/drivers/acpi/acpi_pad.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/acpi_pad.c +++ linux-3.5-rc1/drivers/acpi/acpi_pad.c @@ -36,6 +36,7 @@ #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator" #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80 static DEFINE_MUTEX(isolated_cpus_lock); +static DEFINE_MUTEX(round_robin_lock); static unsigned long power_saving_mwait_eax; @@ -107,7 +108,7 @@ static void round_robin_cpu(unsigned int if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) return; - mutex_lock(&isolated_cpus_lock); + mutex_lock(&round_robin_lock); cpumask_clear(tmp); for_each_cpu(cpu, pad_busy_cpus) cpumask_or(tmp, tmp, topology_thread_cpumask(cpu)); @@ -116,7 +117,7 @@ static void round_robin_cpu(unsigned int if (cpumask_empty(tmp)) cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus); if (cpumask_empty(tmp)) { - mutex_unlock(&isolated_cpus_lock); + mutex_unlock(&round_robin_lock); return; } for_each_cpu(cpu, tmp) { @@ -131,7 +132,7 @@ static void round_robin_cpu(unsigned int tsk_in_cpu[tsk_index] = preferred_cpu; cpumask_set_cpu(preferred_cpu, pad_busy_cpus); cpu_weight[preferred_cpu]++; - mutex_unlock(&isolated_cpus_lock); + mutex_unlock(&round_robin_lock); set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu)); } Index: linux-3.5-rc1/drivers/acpi/apei/apei-base.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/apei/apei-base.c +++ linux-3.5-rc1/drivers/acpi/apei/apei-base.c @@ -243,7 +243,7 @@ static int pre_map_gar_callback(struct a u8 ins = entry->instruction; if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER) - return acpi_os_map_generic_address(&entry->register_region); + return apei_map_generic_address(&entry->register_region); return 0; } @@ -276,7 +276,7 @@ static int post_unmap_gar_callback(struc u8 ins = entry->instruction; if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER) - acpi_os_unmap_generic_address(&entry->register_region); + apei_unmap_generic_address(&entry->register_region); return 0; } @@ -606,6 +606,19 @@ static int apei_check_gar(struct acpi_ge return 0; } +int apei_map_generic_address(struct acpi_generic_address *reg) +{ + int rc; + u32 access_bit_width; + u64 address; + + rc = apei_check_gar(reg, &address, &access_bit_width); + if (rc) + return rc; + return acpi_os_map_generic_address(reg); +} +EXPORT_SYMBOL_GPL(apei_map_generic_address); + /* read GAR in interrupt (including NMI) or process context */ int apei_read(u64 *val, struct acpi_generic_address *reg) { Index: linux-3.5-rc1/drivers/acpi/apei/apei-internal.h =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/apei/apei-internal.h +++ linux-3.5-rc1/drivers/acpi/apei/apei-internal.h @@ -7,6 +7,8 @@ #define APEI_INTERNAL_H #include +#include +#include struct apei_exec_context; @@ -68,6 +70,13 @@ static inline int apei_exec_run_optional /* IP has been set in instruction function */ #define APEI_EXEC_SET_IP 1 +int apei_map_generic_address(struct acpi_generic_address *reg); + +static inline void apei_unmap_generic_address(struct acpi_generic_address *reg) +{ + acpi_os_unmap_generic_address(reg); +} + int apei_read(u64 *val, struct acpi_generic_address *reg); int apei_write(u64 val, struct acpi_generic_address *reg); Index: linux-3.5-rc1/drivers/acpi/apei/ghes.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/apei/ghes.c +++ linux-3.5-rc1/drivers/acpi/apei/ghes.c @@ -301,7 +301,7 @@ static struct ghes *ghes_new(struct acpi if (!ghes) return ERR_PTR(-ENOMEM); ghes->generic = generic; - rc = acpi_os_map_generic_address(&generic->error_status_address); + rc = apei_map_generic_address(&generic->error_status_address); if (rc) goto err_free; error_block_length = generic->error_block_length; @@ -321,7 +321,7 @@ static struct ghes *ghes_new(struct acpi return ghes; err_unmap: - acpi_os_unmap_generic_address(&generic->error_status_address); + apei_unmap_generic_address(&generic->error_status_address); err_free: kfree(ghes); return ERR_PTR(rc); @@ -330,7 +330,7 @@ err_free: static void ghes_fini(struct ghes *ghes) { kfree(ghes->estatus); - acpi_os_unmap_generic_address(&ghes->generic->error_status_address); + apei_unmap_generic_address(&ghes->generic->error_status_address); } enum { Index: linux-3.5-rc1/drivers/acpi/processor_idle.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/processor_idle.c +++ linux-3.5-rc1/drivers/acpi/processor_idle.c @@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast( /* * Suspend / resume control */ +static int acpi_idle_suspend; static u32 saved_bm_rld; static void acpi_idle_bm_rld_save(void) @@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(voi int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { + if (acpi_idle_suspend == 1) + return 0; + acpi_idle_bm_rld_save(); + acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { + if (acpi_idle_suspend == 0) + return 0; + acpi_idle_bm_rld_restore(); + acpi_idle_suspend = 0; return 0; } @@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpu local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + lapic_timer_state_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); @@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* @@ -907,14 +928,21 @@ static int acpi_idle_enter_bm(struct cpu drv, drv->safe_state_index); } else { local_irq_disable(); - acpi_safe_halt(); + if (!acpi_idle_suspend) + acpi_safe_halt(); local_irq_enable(); - return -EINVAL; + return -EBUSY; } } local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EBUSY; + } + if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* Index: linux-3.5-rc1/drivers/acpi/sysfs.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/sysfs.c +++ linux-3.5-rc1/drivers/acpi/sysfs.c @@ -173,7 +173,7 @@ static int param_set_trace_state(const c { int result = 0; - if (!strncmp(val, "enable", strlen("enable") - 1)) { + if (!strncmp(val, "enable", strlen("enable"))) { result = acpi_debug_trace(trace_method_name, trace_debug_level, trace_debug_layer, 0); if (result) @@ -181,7 +181,7 @@ static int param_set_trace_state(const c goto exit; } - if (!strncmp(val, "disable", strlen("disable") - 1)) { + if (!strncmp(val, "disable", strlen("disable"))) { int name = 0; result = acpi_debug_trace((char *)&name, trace_debug_level, trace_debug_layer, 0); Index: linux-3.5-rc1/drivers/acpi/video.c =================================================================== --- linux-3.5-rc1.orig/drivers/acpi/video.c +++ linux-3.5-rc1/drivers/acpi/video.c @@ -558,6 +558,8 @@ acpi_video_bus_DOS(struct acpi_video_bus union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; + if (!video->cap._DOS) + return 0; if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) return -EINVAL; Index: linux-3.5-rc1/drivers/base/power/main.c =================================================================== --- linux-3.5-rc1.orig/drivers/base/power/main.c +++ linux-3.5-rc1/drivers/base/power/main.c @@ -1031,7 +1031,7 @@ static int __device_suspend(struct devic dpm_wait_for_children(dev, async); if (async_error) - return 0; + goto Complete; pm_runtime_get_noresume(dev); if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) @@ -1040,7 +1040,7 @@ static int __device_suspend(struct devic if (pm_wakeup_pending()) { pm_runtime_put_sync(dev); async_error = -EBUSY; - return 0; + goto Complete; } device_lock(dev); @@ -1097,6 +1097,8 @@ static int __device_suspend(struct devic } device_unlock(dev); + + Complete: complete_all(&dev->power.completion); if (error) { Index: linux-3.5-rc1/drivers/bluetooth/ath3k.c =================================================================== --- linux-3.5-rc1.orig/drivers/bluetooth/ath3k.c +++ linux-3.5-rc1/drivers/bluetooth/ath3k.c @@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[ /* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3002) }, + { USB_DEVICE(0x0CF3, 0xE019) }, { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, @@ -77,6 +78,7 @@ static struct usb_device_id ath3k_table[ { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, + { USB_DEVICE(0x0930, 0x0219) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -101,6 +103,7 @@ static struct usb_device_id ath3k_blist_ { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, Index: linux-3.5-rc1/drivers/bluetooth/btmrvl_drv.h =================================================================== --- linux-3.5-rc1.orig/drivers/bluetooth/btmrvl_drv.h +++ linux-3.5-rc1/drivers/bluetooth/btmrvl_drv.h @@ -136,7 +136,7 @@ int btmrvl_remove_card(struct btmrvl_pri void btmrvl_interrupt(struct btmrvl_private *priv); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd); Index: linux-3.5-rc1/drivers/bluetooth/btmrvl_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/bluetooth/btmrvl_main.c +++ linux-3.5-rc1/drivers/bluetooth/btmrvl_main.c @@ -44,23 +44,33 @@ void btmrvl_interrupt(struct btmrvl_priv } EXPORT_SYMBOL_GPL(btmrvl_interrupt); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) { struct hci_event_hdr *hdr = (void *) skb->data; struct hci_ev_cmd_complete *ec; - u16 opcode, ocf; + u16 opcode, ocf, ogf; if (hdr->evt == HCI_EV_CMD_COMPLETE) { ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE); opcode = __le16_to_cpu(ec->opcode); ocf = hci_opcode_ocf(opcode); + ogf = hci_opcode_ogf(opcode); + if (ocf == BT_CMD_MODULE_CFG_REQ && priv->btmrvl_dev.sendcmdflag) { priv->btmrvl_dev.sendcmdflag = false; priv->adapter->cmd_complete = true; wake_up_interruptible(&priv->adapter->cmd_wait_q); } + + if (ogf == OGF) { + BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf); + kfree_skb(skb); + return false; + } } + + return true; } EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt); Index: linux-3.5-rc1/drivers/bluetooth/btmrvl_sdio.c =================================================================== --- linux-3.5-rc1.orig/drivers/bluetooth/btmrvl_sdio.c +++ linux-3.5-rc1/drivers/bluetooth/btmrvl_sdio.c @@ -562,10 +562,12 @@ static int btmrvl_sdio_card_to_host(stru skb_put(skb, buf_len); skb_pull(skb, SDIO_HEADER_LEN); - if (type == HCI_EVENT_PKT) - btmrvl_check_evtpkt(priv, skb); + if (type == HCI_EVENT_PKT) { + if (btmrvl_check_evtpkt(priv, skb)) + hci_recv_frame(skb); + } else + hci_recv_frame(skb); - hci_recv_frame(skb); hdev->stat.byte_rx += buf_len; break; Index: linux-3.5-rc1/drivers/bluetooth/btusb.c =================================================================== --- linux-3.5-rc1.orig/drivers/bluetooth/btusb.c +++ linux-3.5-rc1/drivers/bluetooth/btusb.c @@ -125,6 +125,7 @@ static struct usb_device_id blacklist_ta /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, @@ -139,6 +140,7 @@ static struct usb_device_id blacklist_ta { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, Index: linux-3.5-rc1/drivers/clk/clk.c =================================================================== --- linux-3.5-rc1.orig/drivers/clk/clk.c +++ linux-3.5-rc1/drivers/clk/clk.c @@ -850,18 +850,21 @@ static void clk_change_rate(struct clk * { struct clk *child; unsigned long old_rate; + unsigned long best_parent_rate = 0; struct hlist_node *tmp; old_rate = clk->rate; + if (clk->parent) + best_parent_rate = clk->parent->rate; + if (clk->ops->set_rate) - clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate); + clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, - clk->parent->rate); + clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate); else - clk->rate = clk->parent->rate; + clk->rate = best_parent_rate; if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); @@ -999,7 +1002,7 @@ static struct clk *__clk_init_parent(str if (!clk->parents) clk->parents = - kmalloc((sizeof(struct clk*) * clk->num_parents), + kzalloc((sizeof(struct clk*) * clk->num_parents), GFP_KERNEL); if (!clk->parents) @@ -1065,9 +1068,13 @@ static int __clk_set_parent(struct clk * old_parent = clk->parent; /* find index of new parent clock using cached parent ptrs */ - for (i = 0; i < clk->num_parents; i++) - if (clk->parents[i] == parent) - break; + if (clk->parents) + for (i = 0; i < clk->num_parents; i++) + if (clk->parents[i] == parent) + break; + else + clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); /* * find index of new parent clock using string name comparison @@ -1076,7 +1083,8 @@ static int __clk_set_parent(struct clk * if (i == clk->num_parents) for (i = 0; i < clk->num_parents; i++) if (!strcmp(clk->parent_names[i], parent->name)) { - clk->parents[i] = __clk_lookup(parent->name); + if (clk->parents) + clk->parents[i] = __clk_lookup(parent->name); break; } Index: linux-3.5-rc1/drivers/clk/mxs/clk-imx23.c =================================================================== --- linux-3.5-rc1.orig/drivers/clk/mxs/clk-imx23.c +++ linux-3.5-rc1/drivers/clk/mxs/clk-imx23.c @@ -71,7 +71,7 @@ static void __init clk_misc_init(void) __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); } -static struct clk_lookup uart_lookups[] __initdata = { +static struct clk_lookup uart_lookups[] = { { .dev_id = "duart", }, { .dev_id = "mxs-auart.0", }, { .dev_id = "mxs-auart.1", }, @@ -80,31 +80,31 @@ static struct clk_lookup uart_lookups[] { .dev_id = "80070000.serial", }, }; -static struct clk_lookup hbus_lookups[] __initdata = { +static struct clk_lookup hbus_lookups[] = { { .dev_id = "imx23-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; -static struct clk_lookup xbus_lookups[] __initdata = { +static struct clk_lookup xbus_lookups[] = { { .dev_id = "duart", .con_id = "apb_pclk"}, { .dev_id = "80070000.serial", .con_id = "apb_pclk"}, { .dev_id = "imx23-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; -static struct clk_lookup ssp_lookups[] __initdata = { +static struct clk_lookup ssp_lookups[] = { { .dev_id = "imx23-mmc.0", }, { .dev_id = "imx23-mmc.1", }, { .dev_id = "80010000.ssp", }, { .dev_id = "80034000.ssp", }, }; -static struct clk_lookup lcdif_lookups[] __initdata = { +static struct clk_lookup lcdif_lookups[] = { { .dev_id = "imx23-fb", }, { .dev_id = "80030000.lcdif", }, }; -static struct clk_lookup gpmi_lookups[] __initdata = { +static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx23-gpmi-nand", }, { .dev_id = "8000c000.gpmi", }, }; Index: linux-3.5-rc1/drivers/clk/mxs/clk-imx28.c =================================================================== --- linux-3.5-rc1.orig/drivers/clk/mxs/clk-imx28.c +++ linux-3.5-rc1/drivers/clk/mxs/clk-imx28.c @@ -120,7 +120,7 @@ static void __init clk_misc_init(void) writel_relaxed(val, FRAC0); } -static struct clk_lookup uart_lookups[] __initdata = { +static struct clk_lookup uart_lookups[] = { { .dev_id = "duart", }, { .dev_id = "mxs-auart.0", }, { .dev_id = "mxs-auart.1", }, @@ -135,71 +135,71 @@ static struct clk_lookup uart_lookups[] { .dev_id = "80074000.serial", }, }; -static struct clk_lookup hbus_lookups[] __initdata = { +static struct clk_lookup hbus_lookups[] = { { .dev_id = "imx28-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; -static struct clk_lookup xbus_lookups[] __initdata = { +static struct clk_lookup xbus_lookups[] = { { .dev_id = "duart", .con_id = "apb_pclk"}, { .dev_id = "80074000.serial", .con_id = "apb_pclk"}, { .dev_id = "imx28-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; -static struct clk_lookup ssp0_lookups[] __initdata = { +static struct clk_lookup ssp0_lookups[] = { { .dev_id = "imx28-mmc.0", }, { .dev_id = "80010000.ssp", }, }; -static struct clk_lookup ssp1_lookups[] __initdata = { +static struct clk_lookup ssp1_lookups[] = { { .dev_id = "imx28-mmc.1", }, { .dev_id = "80012000.ssp", }, }; -static struct clk_lookup ssp2_lookups[] __initdata = { +static struct clk_lookup ssp2_lookups[] = { { .dev_id = "imx28-mmc.2", }, { .dev_id = "80014000.ssp", }, }; -static struct clk_lookup ssp3_lookups[] __initdata = { +static struct clk_lookup ssp3_lookups[] = { { .dev_id = "imx28-mmc.3", }, { .dev_id = "80016000.ssp", }, }; -static struct clk_lookup lcdif_lookups[] __initdata = { +static struct clk_lookup lcdif_lookups[] = { { .dev_id = "imx28-fb", }, { .dev_id = "80030000.lcdif", }, }; -static struct clk_lookup gpmi_lookups[] __initdata = { +static struct clk_lookup gpmi_lookups[] = { { .dev_id = "imx28-gpmi-nand", }, { .dev_id = "8000c000.gpmi", }, }; -static struct clk_lookup fec_lookups[] __initdata = { +static struct clk_lookup fec_lookups[] = { { .dev_id = "imx28-fec.0", }, { .dev_id = "imx28-fec.1", }, { .dev_id = "800f0000.ethernet", }, { .dev_id = "800f4000.ethernet", }, }; -static struct clk_lookup can0_lookups[] __initdata = { +static struct clk_lookup can0_lookups[] = { { .dev_id = "flexcan.0", }, { .dev_id = "80032000.can", }, }; -static struct clk_lookup can1_lookups[] __initdata = { +static struct clk_lookup can1_lookups[] = { { .dev_id = "flexcan.1", }, { .dev_id = "80034000.can", }, }; -static struct clk_lookup saif0_lookups[] __initdata = { +static struct clk_lookup saif0_lookups[] = { { .dev_id = "mxs-saif.0", }, { .dev_id = "80042000.saif", }, }; -static struct clk_lookup saif1_lookups[] __initdata = { +static struct clk_lookup saif1_lookups[] = { { .dev_id = "mxs-saif.1", }, { .dev_id = "80046000.saif", }, }; @@ -245,8 +245,8 @@ int __init mx28_clocks_init(void) clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000); clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0); clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1); - clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2); - clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3); + clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2); + clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3); clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0); clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1); clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2); Index: linux-3.5-rc1/drivers/clk/spear/spear6xx_clock.c =================================================================== --- linux-3.5-rc1.orig/drivers/clk/spear/spear6xx_clock.c +++ linux-3.5-rc1/drivers/clk/spear/spear6xx_clock.c @@ -298,7 +298,7 @@ void __init spear6xx_clk_init(void) clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, GMAC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "gmac"); + clk_register_clkdev(clk, NULL, "e0800000.ethernet"); clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB, I2C_CLK_ENB, 0, &_lock); Index: linux-3.5-rc1/drivers/gpu/drm/i915/i915_irq.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/i915/i915_irq.c +++ linux-3.5-rc1/drivers/gpu/drm/i915/i915_irq.c @@ -412,7 +412,6 @@ static void gen6_queue_rps_work(struct d */ spin_lock_irqsave(&dev_priv->rps_lock, flags); - WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); dev_priv->pm_iir |= pm_iir; I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); POSTING_READ(GEN6_PMIMR); Index: linux-3.5-rc1/drivers/gpu/drm/i915/i915_suspend.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/i915/i915_suspend.c +++ linux-3.5-rc1/drivers/gpu/drm/i915/i915_suspend.c @@ -740,8 +740,11 @@ static void i915_restore_display(struct if (HAS_PCH_SPLIT(dev)) { I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL); I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2); - I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); + /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2; + * otherwise we get blank eDP screen after S3 on some machines + */ I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR); Index: linux-3.5-rc1/drivers/gpu/drm/i915/intel_display.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/i915/intel_display.c +++ linux-3.5-rc1/drivers/gpu/drm/i915/intel_display.c @@ -6921,19 +6921,6 @@ static void i915_disable_vga(struct drm_ POSTING_READ(vga_reg); } -static void ivb_pch_pwm_override(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - /* - * IVB has CPU eDP backlight regs too, set things up to let the - * PCH regs control the backlight - */ - I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE); - I915_WRITE(BLC_PWM_CPU_CTL, 0); - I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30)); -} - void intel_modeset_init_hw(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -6950,9 +6937,6 @@ void intel_modeset_init_hw(struct drm_de gen6_enable_rps(dev_priv); gen6_update_ring_freq(dev_priv); } - - if (IS_IVYBRIDGE(dev)) - ivb_pch_pwm_override(dev); } void intel_modeset_init(struct drm_device *dev) Index: linux-3.5-rc1/drivers/gpu/drm/nouveau/nouveau_fbcon.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ linux-3.5-rc1/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -467,7 +467,7 @@ int nouveau_fbcon_init(struct drm_device nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs; ret = drm_fb_helper_init(dev, &nfbdev->helper, - nv_two_heads(dev) ? 2 : 1, 4); + dev->mode_config.num_crtc, 4); if (ret) { kfree(nfbdev); return ret; Index: linux-3.5-rc1/drivers/gpu/drm/nouveau/nouveau_prime.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/nouveau/nouveau_prime.c +++ linux-3.5-rc1/drivers/gpu/drm/nouveau/nouveau_prime.c @@ -1,3 +1,26 @@ +/* + * Copyright 2011 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Dave Airlie + */ #include "drmP.h" #include "drm.h" Index: linux-3.5-rc1/drivers/gpu/drm/udl/udl_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/gpu/drm/udl/udl_main.c +++ linux-3.5-rc1/drivers/gpu/drm/udl/udl_main.c @@ -61,7 +61,7 @@ static int udl_parse_vendor_descriptor(s u8 length; u16 key; - key = *((u16 *) desc); + key = le16_to_cpu(*((u16 *) desc)); desc += sizeof(u16); length = *desc; desc++; Index: linux-3.5-rc1/drivers/hid/Kconfig =================================================================== --- linux-3.5-rc1.orig/drivers/hid/Kconfig +++ linux-3.5-rc1/drivers/hid/Kconfig @@ -1,20 +1,11 @@ # # HID driver configuration # -menuconfig HID_SUPPORT - bool "HID Devices" - depends on INPUT - default y - ---help--- - Say Y here to get to see options for various computer-human interface - device drivers. This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if HID_SUPPORT +menu "HID support" + depends on INPUT config HID - tristate "Generic HID support" + tristate "HID bus support" depends on INPUT default y ---help--- @@ -23,14 +14,17 @@ config HID most commonly used to refer to the USB-HID specification, but other devices (such as, but not strictly limited to, Bluetooth) are designed using HID specification (this involves certain keyboards, - mice, tablets, etc). This option compiles into kernel the generic - HID layer code (parser, usages, etc.), which can then be used by - transport-specific HID implementation (like USB or Bluetooth). + mice, tablets, etc). This option adds the HID bus to the kernel, + together with generic HID layer code. The HID devices are added and + removed from the HID bus by the transport-layer drivers, such as + usbhid (USB_HID) and hidp (BT_HIDP). For docs and specs, see http://www.usb.org/developers/hidpage/ If unsure, say Y. +if HID + config HID_BATTERY_STRENGTH bool "Battery level reporting for HID devices" depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY @@ -59,23 +53,22 @@ config HIDRAW If unsure, say Y. -source "drivers/hid/usbhid/Kconfig" - -menu "Special HID drivers" - depends on HID - config HID_GENERIC tristate "Generic HID driver" depends on HID - default y + default HID ---help--- - Support for generic HID devices. + Support for generic devices on the HID bus. This includes most + keyboards and mice, joysticks, tablets and digitizers. To compile this driver as a module, choose M here: the module will be called hid-generic. If unsure, say Y. +menu "Special HID drivers" + depends on HID + config HID_A4TECH tristate "A4 tech mice" if EXPERT depends on USB_HID @@ -662,4 +655,8 @@ config HID_ZYDACRON endmenu -endif # HID_SUPPORT +endif # HID + +source "drivers/hid/usbhid/Kconfig" + +endmenu Index: linux-3.5-rc1/drivers/hid/hid-core.c =================================================================== --- linux-3.5-rc1.orig/drivers/hid/hid-core.c +++ linux-3.5-rc1/drivers/hid/hid-core.c @@ -1880,6 +1880,7 @@ static const struct hid_device_id hid_ig { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)}, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, Index: linux-3.5-rc1/drivers/hid/hid-ids.h =================================================================== --- linux-3.5-rc1.orig/drivers/hid/hid-ids.h +++ linux-3.5-rc1/drivers/hid/hid-ids.h @@ -160,6 +160,9 @@ #define USB_VENDOR_ID_AVERMEDIA 0x07ca #define USB_DEVICE_ID_AVER_FM_MR800 0xb800 +#define USB_VENDOR_ID_AXENTIA 0x12cf +#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111 + #define USB_VENDOR_ID_BAANTO 0x2453 #define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100 Index: linux-3.5-rc1/drivers/hid/hid-logitech-dj.c =================================================================== --- linux-3.5-rc1.orig/drivers/hid/hid-logitech-dj.c +++ linux-3.5-rc1/drivers/hid/hid-logitech-dj.c @@ -436,27 +436,37 @@ static int logi_dj_recv_send_report(stru static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) { - struct dj_report dj_report; + struct dj_report *dj_report; + int retval; - memset(&dj_report, 0, sizeof(dj_report)); - dj_report.report_id = REPORT_ID_DJ_SHORT; - dj_report.device_index = 0xFF; - dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; - return logi_dj_recv_send_report(djrcv_dev, &dj_report); + dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + if (!dj_report) + return -ENOMEM; + dj_report->report_id = REPORT_ID_DJ_SHORT; + dj_report->device_index = 0xFF; + dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; + retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + kfree(dj_report); + return retval; } static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { - struct dj_report dj_report; + struct dj_report *dj_report; + int retval; - memset(&dj_report, 0, sizeof(dj_report)); - dj_report.report_id = REPORT_ID_DJ_SHORT; - dj_report.device_index = 0xFF; - dj_report.report_type = REPORT_TYPE_CMD_SWITCH; - dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; - dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; - return logi_dj_recv_send_report(djrcv_dev, &dj_report); + dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + if (!dj_report) + return -ENOMEM; + dj_report->report_id = REPORT_ID_DJ_SHORT; + dj_report->device_index = 0xFF; + dj_report->report_type = REPORT_TYPE_CMD_SWITCH; + dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; + dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; + retval = logi_dj_recv_send_report(djrcv_dev, dj_report); + kfree(dj_report); + return retval; } Index: linux-3.5-rc1/drivers/hid/hid-magicmouse.c =================================================================== --- linux-3.5-rc1.orig/drivers/hid/hid-magicmouse.c +++ linux-3.5-rc1/drivers/hid/hid-magicmouse.c @@ -426,8 +426,10 @@ static void magicmouse_setup_input(struc __set_bit(EV_ABS, input->evbit); input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2, + 4, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2, + 4, 0); input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0); /* Note: Touch Y position from the device is inverted relative Index: linux-3.5-rc1/drivers/hid/usbhid/Kconfig =================================================================== --- linux-3.5-rc1.orig/drivers/hid/usbhid/Kconfig +++ linux-3.5-rc1/drivers/hid/usbhid/Kconfig @@ -1,13 +1,13 @@ -comment "USB Input Devices" +menu "USB HID support" depends on USB config USB_HID - tristate "USB Human Interface Device (full HID) support" + tristate "USB HID transport layer" default y depends on USB && INPUT select HID ---help--- - Say Y here if you want full HID support to connect USB keyboards, + Say Y here if you want to connect USB keyboards, mice, joysticks, graphic tablets, or any other HID based devices to your computer via USB, as well as Uninterruptible Power Supply (UPS) and monitor control devices. @@ -81,4 +81,4 @@ config USB_MOUSE endmenu - +endmenu Index: linux-3.5-rc1/drivers/hwmon/applesmc.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/applesmc.c +++ linux-3.5-rc1/drivers/hwmon/applesmc.c @@ -8,7 +8,7 @@ * * Based on hdaps.c driver: * Copyright (C) 2005 Robert Love - * Copyright (C) 2005 Jesper Juhl + * Copyright (C) 2005 Jesper Juhl * * Fan control based on smcFanControl: * Copyright (C) 2006 Hendrik Holtmann Index: linux-3.5-rc1/drivers/hwmon/coretemp.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/coretemp.c +++ linux-3.5-rc1/drivers/hwmon/coretemp.c @@ -693,7 +693,7 @@ static void __cpuinit get_core_online(un * sensors. We check this bit only, all the early CPUs * without thermal sensors will be filtered out. */ - if (!cpu_has(c, X86_FEATURE_DTS)) + if (!cpu_has(c, X86_FEATURE_DTHERM)) return; if (!pdev) { @@ -794,7 +794,7 @@ static struct notifier_block coretemp_cp }; static const struct x86_cpu_id coretemp_ids[] = { - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS }, + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM }, {} }; MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); Index: linux-3.5-rc1/drivers/hwmon/jc42.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/jc42.c +++ linux-3.5-rc1/drivers/hwmon/jc42.c @@ -590,6 +590,6 @@ abort: module_i2c_driver(jc42_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("JC42 driver"); MODULE_LICENSE("GPL"); Index: linux-3.5-rc1/drivers/hwmon/lineage-pem.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/lineage-pem.c +++ linux-3.5-rc1/drivers/hwmon/lineage-pem.c @@ -567,6 +567,6 @@ static struct i2c_driver pem_driver = { module_i2c_driver(pem_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver"); MODULE_LICENSE("GPL"); Index: linux-3.5-rc1/drivers/hwmon/ltc4261.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/ltc4261.c +++ linux-3.5-rc1/drivers/hwmon/ltc4261.c @@ -292,6 +292,6 @@ static struct i2c_driver ltc4261_driver module_i2c_driver(ltc4261_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("LTC4261 driver"); MODULE_LICENSE("GPL"); Index: linux-3.5-rc1/drivers/hwmon/max16065.c =================================================================== --- linux-3.5-rc1.orig/drivers/hwmon/max16065.c +++ linux-3.5-rc1/drivers/hwmon/max16065.c @@ -692,6 +692,6 @@ static struct i2c_driver max16065_driver module_i2c_driver(max16065_driver); -MODULE_AUTHOR("Guenter Roeck "); +MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("MAX16065 driver"); MODULE_LICENSE("GPL"); Index: linux-3.5-rc1/drivers/media/common/saa7146_fops.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/common/saa7146_fops.c +++ linux-3.5-rc1/drivers/media/common/saa7146_fops.c @@ -198,7 +198,6 @@ static int fops_open(struct file *file) struct saa7146_dev *dev = video_drvdata(file); struct saa7146_fh *fh = NULL; int result = 0; - enum v4l2_buf_type type; DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev)); @@ -207,10 +206,6 @@ static int fops_open(struct file *file) DEB_D("using: %p\n", dev); - type = vdev->vfl_type == VFL_TYPE_GRABBER - ? V4L2_BUF_TYPE_VIDEO_CAPTURE - : V4L2_BUF_TYPE_VBI_CAPTURE; - /* check if an extension is registered */ if( NULL == dev->ext ) { DEB_S("no extension registered for this device\n"); Index: linux-3.5-rc1/drivers/media/dvb/frontends/cx24110.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/dvb/frontends/cx24110.c +++ linux-3.5-rc1/drivers/media/dvb/frontends/cx24110.c @@ -516,9 +516,9 @@ static int cx24110_read_ucblocks(struct if(cx24110_readreg(state,0x10)&0x40) { /* the RS error counter has finished one counting window */ cx24110_writereg(state,0x10,0x60); /* select the byer reg */ - cx24110_readreg(state, 0x12) | + (void)(cx24110_readreg(state, 0x12) | (cx24110_readreg(state, 0x13) << 8) | - (cx24110_readreg(state, 0x14) << 16); + (cx24110_readreg(state, 0x14) << 16)); cx24110_writereg(state,0x10,0x70); /* select the bler reg */ state->lastbler=cx24110_readreg(state,0x12)| (cx24110_readreg(state,0x13)<<8)| Index: linux-3.5-rc1/drivers/media/dvb/frontends/cxd2820r_c.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/dvb/frontends/cxd2820r_c.c +++ linux-3.5-rc1/drivers/media/dvb/frontends/cxd2820r_c.c @@ -121,7 +121,7 @@ int cxd2820r_get_frontend_c(struct dvb_f if (ret) goto error; - switch ((buf[0] >> 0) & 0x03) { + switch ((buf[0] >> 0) & 0x07) { case 0: c->modulation = QAM_16; break; Index: linux-3.5-rc1/drivers/media/dvb/frontends/lg2160.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/dvb/frontends/lg2160.c +++ linux-3.5-rc1/drivers/media/dvb/frontends/lg2160.c @@ -126,7 +126,7 @@ static int lg216x_write_regs(struct lg21 lg_reg("writing %d registers...\n", len); - for (i = 0; i < len - 1; i++) { + for (i = 0; i < len; i++) { ret = lg216x_write_reg(state, regs[i].reg, regs[i].val); if (lg_fail(ret)) return ret; Index: linux-3.5-rc1/drivers/media/dvb/siano/smsusb.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/dvb/siano/smsusb.c +++ linux-3.5-rc1/drivers/media/dvb/siano/smsusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id smsusb .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0xc0a0), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xf5a0), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; Index: linux-3.5-rc1/drivers/media/radio/radio-maxiradio.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/radio/radio-maxiradio.c +++ linux-3.5-rc1/drivers/media/radio/radio-maxiradio.c @@ -157,7 +157,7 @@ static int __devinit maxiradio_probe(str goto err_out_free_region; dev->io = pci_resource_start(pdev, 0); - if (snd_tea575x_init(&dev->tea)) { + if (snd_tea575x_init(&dev->tea, THIS_MODULE)) { printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n"); goto err_out_free_region; } Index: linux-3.5-rc1/drivers/media/radio/radio-sf16fmr2.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/radio/radio-sf16fmr2.c +++ linux-3.5-rc1/drivers/media/radio/radio-sf16fmr2.c @@ -238,7 +238,7 @@ static int __devinit fmr2_probe(struct f snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s", fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev)); - if (snd_tea575x_init(&fmr2->tea)) { + if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) { printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); release_region(fmr2->io, 2); return -ENODEV; Index: linux-3.5-rc1/drivers/media/radio/si470x/radio-si470x-usb.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/radio/si470x/radio-si470x-usb.c +++ linux-3.5-rc1/drivers/media/radio/si470x/radio-si470x-usb.c @@ -51,6 +51,8 @@ static struct usb_device_id si470x_usb_d { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, /* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */ { USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) }, + /* Axentia ALERT FM USB Receiver */ + { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; Index: linux-3.5-rc1/drivers/media/video/bt8xx/bttv-cards.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/bt8xx/bttv-cards.c +++ linux-3.5-rc1/drivers/media/video/bt8xx/bttv-cards.c @@ -371,7 +371,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -384,7 +383,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -398,7 +396,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -414,7 +411,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -427,7 +423,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0, 1, 0, 1 }, .gpiomute = 3, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -440,7 +435,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0f, .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, /* 0x04 for some cards ?? */ - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= avermedia_tvphone_audio, @@ -454,7 +448,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -469,7 +462,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0xc00, 0x800, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -482,7 +474,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 3, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 1, 2, 3 }, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -496,7 +487,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 0, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -510,7 +500,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -524,7 +513,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 14, 11, 7 }, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -536,7 +524,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 14, 11, 7 }, - .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -553,7 +540,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -567,7 +553,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 1, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -583,7 +568,6 @@ struct tvcard bttv_tvcards[] = { /* 2003-10-20 by "Anton A. Arapov" */ .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -597,7 +581,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1, 0), .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, .gpiomute = 0xcfa007, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .volume_gpio = winview_volume, @@ -611,7 +594,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 0, 0, 0 }, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -660,7 +642,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 0x800, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -691,7 +672,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = {0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0xc00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -706,7 +686,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, @@ -720,7 +699,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 0, 1, 1), .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, }, @@ -748,7 +726,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, .gpiomute = 0x40000, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, @@ -793,7 +770,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .muxsel_hook = PXC200_muxsel, @@ -834,7 +810,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -847,7 +822,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x500, 0, 0x300, 0x900 }, .gpiomute = 0x900, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -874,7 +848,6 @@ struct tvcard bttv_tvcards[] = { Note: There exists another variant "Winfast 2000" with tv stereo !? Note: eeprom only contains FF and pci subsystem id 107d:6606 */ - .needs_tvaudio = 0, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ @@ -934,7 +907,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0x551400, 0x551200, 0, 0 }, .gpiomute = 0x551c00, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -949,7 +921,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0xd0001, 0, 0 }, .gpiomute = 1, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -966,7 +937,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -980,7 +950,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 15, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 13, 4, 11, 7 }, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -995,7 +964,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0, 0}, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1066,7 +1034,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1084,7 +1051,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = {2,0,0,0 }, .gpiomute = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1163,7 +1129,6 @@ struct tvcard bttv_tvcards[] = { MUX2 (mask 0x30000): 0,2,3= from MSP34xx 1= FM stereo Radio from Tuner */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1179,7 +1144,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0x10, 8 }, .gpiomute = 4, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1218,7 +1182,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -1250,7 +1213,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(3, 1), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = TUNER_ABSENT, @@ -1266,7 +1228,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0x800, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, .tuner_addr = ADDR_UNSET, @@ -1312,7 +1273,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2), .gpiomux = { }, .no_msp34xx = 1, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -1329,7 +1289,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 1, 0, 4, 4 }, .gpiomute = 9, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1379,7 +1338,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x1800, .audio_mode_gpio= fv2000s_audio, .no_msp34xx = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1393,7 +1351,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, .gpiomute = 0x900, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1477,7 +1434,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ .gpiomute = 13, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_I_FM, .tuner_addr = ADDR_UNSET, @@ -1514,7 +1470,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, .gpiomute = 0x09, - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1540,7 +1495,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -1567,7 +1521,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 4, - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -1597,7 +1550,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -1619,7 +1571,6 @@ struct tvcard bttv_tvcards[] = { * btwincap uses 0x80000/0x80003 */ .gpiomute = 4, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1655,7 +1606,6 @@ struct tvcard bttv_tvcards[] = { /* .audio_inputs= 1, */ .svhs = 2, .muxsel = MUXSEL(2, 0, 1, 1), - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -1875,7 +1825,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 3}, .gpiomute = 4, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -1902,7 +1851,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -1920,7 +1868,6 @@ struct tvcard bttv_tvcards[] = { /* Tuner, Radio, external, internal, off, on */ .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, .gpiomute = 0x0f, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, @@ -1936,7 +1883,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 1), - .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2034,7 +1980,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2049,7 +1994,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 0), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2062,7 +2006,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2079,7 +2022,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2094,7 +2036,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2118,7 +2059,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .svhs = NO_SVHS, /* card has no svhs */ - .needs_tvaudio = 0, .no_msp34xx = 1, .no_tda7432 = 1, .gpiomask = 0x00, @@ -2168,7 +2108,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 3, .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 1, 1, 1, 1 }, - .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .pll = PLL_35, @@ -2210,7 +2149,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, .no_tda7432 = 1, - .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, @@ -2222,7 +2160,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .svhs = 2, - .needs_tvaudio = 0, .gpiomask = 0x68, .muxsel = MUXSEL(2, 3, 1), .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, @@ -2241,7 +2178,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2265,7 +2201,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .pll = PLL_28, - .needs_tvaudio = 0, .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2358,7 +2293,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2405,7 +2339,6 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .gpiomask = 0x008007, .gpiomux = { 0, 0x000001,0,0 }, - .needs_tvaudio = 1, .has_radio = 1, }, [BTTV_BOARD_TIBET_CS16] = { @@ -2518,7 +2451,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, .tuner_addr = 0xc1 >>1, @@ -2534,7 +2466,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TENA_9533_DI, .tuner_addr = ADDR_UNSET, @@ -2615,7 +2546,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 1, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, @@ -2714,7 +2644,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, - .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -2746,7 +2675,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ .gpiomute = 3, /* CONTVFMi */ - .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ .tuner_addr = ADDR_UNSET, .pll = PLL_28, @@ -2785,7 +2713,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(0, 2, 3, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2799,7 +2726,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(2, 3, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2813,7 +2739,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = MUXSEL(3, 2, 1), .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2877,7 +2802,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .muxsel = MUXSEL(2, 3), .gpiomux = { 0 }, - .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -3649,7 +3573,7 @@ void __devinit bttv_init_tuner(struct bt struct tuner_setup tun_setup; /* Load tuner module before issuing tuner config call! */ - if (bttv_tvcards[btv->c.type].has_radio) + if (btv->has_radio) v4l2_i2c_new_subdev(&btv->c.v4l2_dev, &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); @@ -3664,7 +3588,7 @@ void __devinit bttv_init_tuner(struct bt tun_setup.type = btv->tuner_type; tun_setup.addr = addr; - if (bttv_tvcards[btv->c.type].has_radio) + if (btv->has_radio) tun_setup.mode_mask |= T_RADIO; bttv_call_all(btv, tuner, s_type_addr, &tun_setup); @@ -3724,6 +3648,10 @@ static void __devinit hauppauge_eeprom(s bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; } + + /* The 61334 needs the msp3410 to do the radio demod to get sound */ + if (tv.model == 61334) + btv->radio_uses_msp_demodulator = 1; } static int terratec_active_radio_upgrade(struct bttv *btv) Index: linux-3.5-rc1/drivers/media/video/bt8xx/bttv-driver.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/bt8xx/bttv-driver.c +++ linux-3.5-rc1/drivers/media/video/bt8xx/bttv-driver.c @@ -1218,6 +1218,11 @@ audio_mux(struct bttv *btv, int input, i For now this is sufficient. */ switch (input) { case TVAUDIO_INPUT_RADIO: + /* Some boards need the msp do to the radio demod */ + if (btv->radio_uses_msp_demodulator) { + in = MSP_INPUT_DEFAULT; + break; + } in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); break; Index: linux-3.5-rc1/drivers/media/video/bt8xx/bttv.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/bt8xx/bttv.h +++ linux-3.5-rc1/drivers/media/video/bt8xx/bttv.h @@ -236,7 +236,6 @@ struct tvcard { /* i2c audio flags */ unsigned int no_msp34xx:1; unsigned int no_tda7432:1; - unsigned int needs_tvaudio:1; unsigned int msp34xx_alt:1; /* Note: currently no card definition needs to mark the presence of a RDS saa6588 chip. If this is ever needed, then add a new Index: linux-3.5-rc1/drivers/media/video/bt8xx/bttvp.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/bt8xx/bttvp.h +++ linux-3.5-rc1/drivers/media/video/bt8xx/bttvp.h @@ -440,6 +440,7 @@ struct bttv { /* radio data/state */ int has_radio; int radio_user; + int radio_uses_msp_demodulator; /* miro/pinnacle + Aimslab VHX philips matchbox (tea5757 radio tuner) support */ Index: linux-3.5-rc1/drivers/media/video/bw-qcam.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/bw-qcam.c +++ linux-3.5-rc1/drivers/media/video/bw-qcam.c @@ -607,8 +607,9 @@ static long qc_capture(struct qcam *q, c } o = i * pixels_per_line + pixels_read + k; if (o < len) { + u8 ch = invert - buffer[k]; got++; - put_user((invert - buffer[k]) << shift, buf + o); + put_user(ch << shift, buf + o); } } pixels_read += bytes; @@ -648,8 +649,8 @@ static int qcam_querycap(struct file *fi struct qcam *qcam = video_drvdata(file); strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); - strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card)); - strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card)); + strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info)); vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; @@ -688,8 +689,8 @@ static int qcam_g_fmt_vid_cap(struct fil pix->height = qcam->height / qcam->transfer_scale; pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6; pix->field = V4L2_FIELD_NONE; - pix->bytesperline = qcam->width; - pix->sizeimage = qcam->width * qcam->height; + pix->bytesperline = pix->width; + pix->sizeimage = pix->width * pix->height; /* Just a guess */ pix->colorspace = V4L2_COLORSPACE_SRGB; return 0; @@ -757,7 +758,7 @@ static int qcam_enum_fmt_vid_cap(struct "4-Bit Monochrome", V4L2_PIX_FMT_Y4, { 0, 0, 0, 0 } }, - { 0, 0, 0, + { 1, 0, 0, "6-Bit Monochrome", V4L2_PIX_FMT_Y6, { 0, 0, 0, 0 } }, @@ -772,6 +773,25 @@ static int qcam_enum_fmt_vid_cap(struct return 0; } +static int qcam_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + static const struct v4l2_frmsize_discrete sizes[] = { + { 80, 60 }, + { 160, 120 }, + { 320, 240 }, + }; + + if (fsize->index > 2) + return -EINVAL; + if (fsize->pixel_format != V4L2_PIX_FMT_Y4 && + fsize->pixel_format != V4L2_PIX_FMT_Y6) + return -EINVAL; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete = sizes[fsize->index]; + return 0; +} + static ssize_t qcam_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -795,6 +815,11 @@ static ssize_t qcam_read(struct file *fi return len; } +static unsigned int qcam_poll(struct file *filp, poll_table *wait) +{ + return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM; +} + static int qcam_s_ctrl(struct v4l2_ctrl *ctrl) { struct qcam *qcam = @@ -828,7 +853,7 @@ static const struct v4l2_file_operations .owner = THIS_MODULE, .open = v4l2_fh_open, .release = v4l2_fh_release, - .poll = v4l2_ctrl_poll, + .poll = qcam_poll, .unlocked_ioctl = video_ioctl2, .read = qcam_read, }; @@ -839,6 +864,7 @@ static const struct v4l2_ioctl_ops qcam_ .vidioc_s_input = qcam_s_input, .vidioc_enum_input = qcam_enum_input, .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap, + .vidioc_enum_framesizes = qcam_enum_framesizes, .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap, .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap, .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap, @@ -864,9 +890,9 @@ static struct qcam *qcam_init(struct par return NULL; v4l2_dev = &qcam->v4l2_dev; - strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name)); + snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams); - if (v4l2_device_register(NULL, v4l2_dev) < 0) { + if (v4l2_device_register(port->dev, v4l2_dev) < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); kfree(qcam); return NULL; @@ -886,7 +912,7 @@ static struct qcam *qcam_init(struct par return NULL; } qcam->pport = port; - qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, + qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL, NULL, 0, NULL); if (qcam->pdev == NULL) { v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name); @@ -975,6 +1001,7 @@ static int init_bwqcam(struct parport *p return -ENODEV; } qc_calibrate(qcam); + v4l2_ctrl_handler_setup(&qcam->hdl); parport_release(qcam->pdev); Index: linux-3.5-rc1/drivers/media/video/cx18/cx18-driver.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/cx18/cx18-driver.c +++ linux-3.5-rc1/drivers/media/video/cx18/cx18-driver.c @@ -838,10 +838,10 @@ static int cx18_setup_pci(struct cx18 *c } CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%lx\n", + "irq: %d, latency: %d, memory: 0x%llx\n", cx->pci_dev->device, cx->card_rev, pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), - cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr); + cx->pci_dev->irq, pci_latency, (u64)cx->base_addr); return 0; } @@ -938,7 +938,7 @@ static int __devinit cx18_probe(struct p if (retval) goto err; - CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr); + CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr); /* PCI Device Setup */ retval = cx18_setup_pci(cx, pci_dev, pci_id); @@ -946,8 +946,8 @@ static int __devinit cx18_probe(struct p goto free_workqueues; /* map io memory */ - CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); + CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); if (!cx->enc_mem) { Index: linux-3.5-rc1/drivers/media/video/cx18/cx18-driver.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/cx18/cx18-driver.h +++ linux-3.5-rc1/drivers/media/video/cx18/cx18-driver.h @@ -622,7 +622,7 @@ struct cx18 { unique ID. Starts at 1, so 0 can be used as uninitialized value in the stream->id. */ - u32 base_addr; + resource_size_t base_addr; u8 card_rev; void __iomem *enc_mem, *reg_mem; Index: linux-3.5-rc1/drivers/media/video/cx18/cx18-firmware.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/cx18/cx18-firmware.c +++ linux-3.5-rc1/drivers/media/video/cx18/cx18-firmware.c @@ -164,8 +164,13 @@ static int load_apu_fw_direct(const char apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32]; while (offset + sizeof(seghdr) < fw->size) { - /* TODO: byteswapping */ - memcpy(&seghdr, src + offset / 4, sizeof(seghdr)); + const u32 *shptr = src + offset / 4; + + seghdr.sync1 = le32_to_cpu(shptr[0]); + seghdr.sync2 = le32_to_cpu(shptr[1]); + seghdr.addr = le32_to_cpu(shptr[2]); + seghdr.size = le32_to_cpu(shptr[3]); + offset += sizeof(seghdr); if (seghdr.sync1 != APU_ROM_SYNC1 || seghdr.sync2 != APU_ROM_SYNC2) { Index: linux-3.5-rc1/drivers/media/video/cx18/cx18-mailbox.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/cx18/cx18-mailbox.c +++ linux-3.5-rc1/drivers/media/video/cx18/cx18-mailbox.c @@ -434,6 +434,7 @@ static int epu_dma_done_irq(struct cx18 { u32 handle, mdl_ack_offset, mdl_ack_count; struct cx18_mailbox *mb; + int i; mb = &order->mb; handle = mb->args[0]; @@ -447,8 +448,9 @@ static int epu_dma_done_irq(struct cx18 return -1; } - cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset, - sizeof(struct cx18_mdl_ack) * mdl_ack_count); + for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32)) + ((u32 *)order->mdl_ack)[i / sizeof(u32)] = + cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i); if ((order->flags & CX18_F_EWO_MB_STALE) == 0) mb_ack_irq(cx, order); @@ -538,6 +540,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *c struct cx18_mailbox *order_mb; struct cx18_in_work_order *order; int submit; + int i; switch (rpu) { case CPU: @@ -562,10 +565,12 @@ void cx18_api_epu_cmd_irq(struct cx18 *c order_mb = &order->mb; /* mb->cmd and mb->args[0] through mb->args[2] */ - cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32)); + for (i = 0; i < 4; i++) + (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i); + /* mb->request and mb->ack. N.B. we want to read mb->ack last */ - cx18_memcpy_fromio(cx, &order_mb->request, &mb->request, - 2 * sizeof(u32)); + for (i = 0; i < 2; i++) + (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i); if (order_mb->request == order_mb->ack) { CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " Index: linux-3.5-rc1/drivers/media/video/cx88/cx88-blackbird.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/cx88/cx88-blackbird.c +++ linux-3.5-rc1/drivers/media/video/cx88/cx88-blackbird.c @@ -471,7 +471,7 @@ static int blackbird_load_firmware(struc dprintk(1,"Loading firmware ...\n"); dataptr = (u32*)firmware->data; for (i = 0; i < (firmware->size >> 2); i++) { - value = *dataptr; + value = le32_to_cpu(*dataptr); checksum += ~value; memory_write(dev->core, i, value); dataptr++; Index: linux-3.5-rc1/drivers/media/video/em28xx/em28xx-cards.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/em28xx/em28xx-cards.c +++ linux-3.5-rc1/drivers/media/video/em28xx/em28xx-cards.c @@ -974,6 +974,7 @@ struct em28xx_board em28xx_boards[] = { [EM2884_BOARD_CINERGY_HTC_STICK] = { .name = "Terratec Cinergy HTC Stick", .has_dvb = 1, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, #if 0 .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x41, Index: linux-3.5-rc1/drivers/media/video/em28xx/em28xx-input.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/em28xx/em28xx-input.c +++ linux-3.5-rc1/drivers/media/video/em28xx/em28xx-input.c @@ -527,6 +527,8 @@ static int em28xx_ir_init(struct em28xx if (dev->board.ir_codes == NULL) { /* No remote control support */ + em28xx_warn("Remote control support is not available for " + "this card.\n"); return 0; } Index: linux-3.5-rc1/drivers/media/video/gspca/gspca.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/gspca.c +++ linux-3.5-rc1/drivers/media/video/gspca/gspca.c @@ -1653,7 +1653,7 @@ static int vidioc_streamoff(struct file enum v4l2_buf_type buf_type) { struct gspca_dev *gspca_dev = video_drvdata(file); - int ret; + int i, ret; if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1678,6 +1678,8 @@ static int vidioc_streamoff(struct file wake_up_interruptible(&gspca_dev->wq); /* empty the transfer queues */ + for (i = 0; i < gspca_dev->nframes; i++) + gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS; atomic_set(&gspca_dev->fr_q, 0); atomic_set(&gspca_dev->fr_i, 0); gspca_dev->fr_o = 0; Index: linux-3.5-rc1/drivers/media/video/gspca/ov534.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/ov534.c +++ linux-3.5-rc1/drivers/media/video/gspca/ov534.c @@ -96,7 +96,7 @@ static void setbrightness(struct gspca_d static void setcontrast(struct gspca_dev *gspca_dev); static void setgain(struct gspca_dev *gspca_dev); static void setexposure(struct gspca_dev *gspca_dev); -static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val); +static void setagc(struct gspca_dev *gspca_dev); static void setawb(struct gspca_dev *gspca_dev); static void setaec(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); @@ -189,7 +189,7 @@ static const struct ctrl sd_ctrls[] = { .step = 1, .default_value = 1, }, - .set = sd_setagc + .set_control = setagc }, [AWB] = { { @@ -851,6 +851,7 @@ static int sccb_check_status(struct gspc int i; for (i = 0; i < 5; i++) { + msleep(10); data = ov534_reg_read(gspca_dev, OV534_REG_STATUS); switch (data) { @@ -1242,10 +1243,6 @@ static int sd_config(struct gspca_dev *g cam->ctrls = sd->ctrls; - /* the auto white balance control works only when auto gain is set */ - if (sd_ctrls[AGC].qctrl.default_value == 0) - gspca_dev->ctrl_inac |= (1 << AWB); - cam->cam_mode = ov772x_mode; cam->nmodes = ARRAY_SIZE(ov772x_mode); @@ -1486,29 +1483,6 @@ scan_next: } while (remaining_len > 0); } -static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->ctrls[AGC].val = val; - - /* the auto white balance control works only - * when auto gain is set */ - if (val) { - gspca_dev->ctrl_inac &= ~(1 << AWB); - } else { - gspca_dev->ctrl_inac |= (1 << AWB); - if (sd->ctrls[AWB].val) { - sd->ctrls[AWB].val = 0; - if (gspca_dev->streaming) - setawb(gspca_dev); - } - } - if (gspca_dev->streaming) - setagc(gspca_dev); - return gspca_dev->usb_err; -} - static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu) { Index: linux-3.5-rc1/drivers/media/video/gspca/ov534_9.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/ov534_9.c +++ linux-3.5-rc1/drivers/media/video/gspca/ov534_9.c @@ -1008,6 +1008,7 @@ static int sccb_check_status(struct gspc int i; for (i = 0; i < 5; i++) { + msleep(10); data = reg_r(gspca_dev, OV534_REG_STATUS); switch (data) { Index: linux-3.5-rc1/drivers/media/video/gspca/pac7311.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/pac7311.c +++ linux-3.5-rc1/drivers/media/video/gspca/pac7311.c @@ -418,7 +418,7 @@ static int sd_init_controls(struct gspca struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; gspca_dev->vdev.ctrl_handler = hdl; - v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_handler_init(hdl, 5); sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_CONTRAST, 0, 15, 1, 7); Index: linux-3.5-rc1/drivers/media/video/gspca/sn9c20x.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/sn9c20x.c +++ linux-3.5-rc1/drivers/media/video/gspca/sn9c20x.c @@ -1761,7 +1761,6 @@ static int sd_init_controls(struct gspca V4L2_CID_SATURATION, 0, 255, 1, 127); sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_HUE, -180, 180, 1, 0); - v4l2_ctrl_cluster(4, &sd->brightness); sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_GAMMA, 0, 255, 1, 0x10); @@ -1770,7 +1769,6 @@ static int sd_init_controls(struct gspca V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28); sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28); - v4l2_ctrl_cluster(2, &sd->blue); if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 && @@ -1779,7 +1777,6 @@ static int sd_init_controls(struct gspca V4L2_CID_HFLIP, 0, 1, 1, 0); sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); - v4l2_ctrl_cluster(2, &sd->hflip); } if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB && @@ -1794,6 +1791,20 @@ static int sd_init_controls(struct gspca V4L2_CID_GAIN, 0, 28, 1, 0); sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + } + + sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80); + if (hdl->error) { + pr_err("Could not initialize controls\n"); + return hdl->error; + } + + v4l2_ctrl_cluster(4, &sd->brightness); + v4l2_ctrl_cluster(2, &sd->blue); + if (sd->hflip) + v4l2_ctrl_cluster(2, &sd->hflip); + if (sd->autogain) { if (sd->sensor == SENSOR_SOI968) /* this sensor doesn't have the exposure control and autogain is clustered with gain instead. This works @@ -1803,13 +1814,6 @@ static int sd_init_controls(struct gspca /* Otherwise autogain is clustered with exposure. */ v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false); } - - sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, - V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80); - if (hdl->error) { - pr_err("Could not initialize controls\n"); - return hdl->error; - } return 0; } Index: linux-3.5-rc1/drivers/media/video/gspca/sonixj.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/gspca/sonixj.c +++ linux-3.5-rc1/drivers/media/video/gspca/sonixj.c @@ -3120,7 +3120,7 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (flags) static const struct usb_device_id device_table[] = { - {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, + {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)}, {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)}, Index: linux-3.5-rc1/drivers/media/video/ivtv/ivtv-driver.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/ivtv/ivtv-driver.c +++ linux-3.5-rc1/drivers/media/video/ivtv/ivtv-driver.c @@ -866,10 +866,10 @@ static int ivtv_setup_pci(struct ivtv *i pci_write_config_dword(pdev, 0x40, 0xffff); IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%lx\n", + "irq: %d, latency: %d, memory: 0x%llx\n", pdev->device, pdev->revision, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), - pdev->irq, pci_latency, (unsigned long)itv->base_addr); + pdev->irq, pci_latency, (u64)itv->base_addr); return 0; } @@ -1007,7 +1007,7 @@ static int __devinit ivtv_probe(struct p itv->cxhdl.priv = itv; itv->cxhdl.func = ivtv_api_func; - IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr); + IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr); /* PCI Device Setup */ retval = ivtv_setup_pci(itv, pdev, pci_id); @@ -1017,8 +1017,8 @@ static int __devinit ivtv_probe(struct p goto free_mem; /* map io memory */ - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); if (!itv->enc_mem) { @@ -1034,8 +1034,8 @@ static int __devinit ivtv_probe(struct p } if (itv->has_cx23415) { - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); if (!itv->dec_mem) { @@ -1056,8 +1056,8 @@ static int __devinit ivtv_probe(struct p } /* map registers memory */ - IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n", - itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); + IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", + (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); itv->reg_mem = ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (!itv->reg_mem) { Index: linux-3.5-rc1/drivers/media/video/ivtv/ivtv-driver.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/ivtv/ivtv-driver.h +++ linux-3.5-rc1/drivers/media/video/ivtv/ivtv-driver.h @@ -622,7 +622,7 @@ struct ivtv { struct v4l2_subdev *sd_video; /* controlling video decoder subdev */ struct v4l2_subdev *sd_audio; /* controlling audio subdev */ struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */ - u32 base_addr; /* PCI resource base address */ + resource_size_t base_addr; /* PCI resource base address */ volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */ volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */ volatile void __iomem *reg_mem; /* pointer to mapped registers */ Index: linux-3.5-rc1/drivers/media/video/mem2mem_testdev.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/mem2mem_testdev.c +++ linux-3.5-rc1/drivers/media/video/mem2mem_testdev.c @@ -110,22 +110,6 @@ enum { V4L2_M2M_DST = 1, }; -/* Source and destination queue data */ -static struct m2mtest_q_data q_data[2]; - -static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type) -{ - switch (type) { - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return &q_data[V4L2_M2M_SRC]; - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - return &q_data[V4L2_M2M_DST]; - default: - BUG(); - } - return NULL; -} - #define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE #define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1) @@ -198,8 +182,26 @@ struct m2mtest_ctx { int aborting; struct v4l2_m2m_ctx *m2m_ctx; + + /* Source and destination queue data */ + struct m2mtest_q_data q_data[2]; }; +static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &ctx->q_data[V4L2_M2M_SRC]; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &ctx->q_data[V4L2_M2M_DST]; + default: + BUG(); + } + return NULL; +} + + static struct v4l2_queryctrl *get_ctrl(int id) { int i; @@ -223,7 +225,7 @@ static int device_process(struct m2mtest int tile_w, bytes_left; int width, height, bytesperline; - q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); width = q_data->width; height = q_data->height; @@ -436,7 +438,7 @@ static int vidioc_g_fmt(struct m2mtest_c if (!vq) return -EINVAL; - q_data = get_q_data(f->type); + q_data = get_q_data(ctx, f->type); f->fmt.pix.width = q_data->width; f->fmt.pix.height = q_data->height; @@ -535,7 +537,7 @@ static int vidioc_s_fmt(struct m2mtest_c if (!vq) return -EINVAL; - q_data = get_q_data(f->type); + q_data = get_q_data(ctx, f->type); if (!q_data) return -EINVAL; @@ -747,7 +749,7 @@ static int m2mtest_queue_setup(struct vb struct m2mtest_q_data *q_data; unsigned int size, count = *nbuffers; - q_data = get_q_data(vq->type); + q_data = get_q_data(ctx, vq->type); size = q_data->width * q_data->height * q_data->fmt->depth >> 3; @@ -775,7 +777,7 @@ static int m2mtest_buf_prepare(struct vb dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); - q_data = get_q_data(vb->vb2_queue->type); + q_data = get_q_data(ctx, vb->vb2_queue->type); if (vb2_plane_size(vb, 0) < q_data->sizeimage) { dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", @@ -860,6 +862,9 @@ static int m2mtest_open(struct file *fil ctx->transtime = MEM2MEM_DEF_TRANSTIME; ctx->num_processed = 0; + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0]; + ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); if (IS_ERR(ctx->m2m_ctx)) { @@ -986,9 +991,6 @@ static int m2mtest_probe(struct platform goto err_m2m; } - q_data[V4L2_M2M_SRC].fmt = &formats[0]; - q_data[V4L2_M2M_DST].fmt = &formats[0]; - return 0; v4l2_m2m_release(dev->m2m_dev); Index: linux-3.5-rc1/drivers/media/video/mx2_camera.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/mx2_camera.c +++ linux-3.5-rc1/drivers/media/video/mx2_camera.c @@ -345,19 +345,6 @@ static struct mx2_fmt_cfg mx27_emma_prp_ PRP_INTR_CH2OVF, } }, - { - .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8, - .out_fmt = V4L2_PIX_FMT_YUV420, - .cfg = { - .channel = 2, - .in_fmt = PRP_CNTL_DATA_IN_YUV422, - .out_fmt = PRP_CNTL_CH2_OUT_YUV420, - .src_pixel = 0x22000888, /* YUV422 (YUYV) */ - .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR | - PRP_INTR_CH2FC | PRP_INTR_LBOVF | - PRP_INTR_CH2OVF, - } - }, }; static struct mx2_fmt_cfg *mx27_emma_prp_get_format( @@ -984,7 +971,6 @@ static int mx2_camera_set_bus_param(stru struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - const struct soc_camera_format_xlate *xlate; unsigned long common_flags; int ret; int bytesperline; @@ -1029,31 +1015,14 @@ static int mx2_camera_set_bus_param(stru return ret; } - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (!xlate) { - dev_warn(icd->parent, "Format %x not found\n", pixfmt); - return -EINVAL; - } - - if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) { - csicr1 |= CSICR1_PACK_DIR; - csicr1 &= ~CSICR1_SWAP16_EN; - dev_dbg(icd->parent, "already yuyv format, don't convert\n"); - } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) { - csicr1 &= ~CSICR1_PACK_DIR; - csicr1 |= CSICR1_SWAP16_EN; - dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n"); - } else { - dev_warn(icd->parent, "mbus format not supported\n"); - return -EINVAL; - } - if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) csicr1 |= CSICR1_REDGE; if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) csicr1 |= CSICR1_SOF_POL; if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) csicr1 |= CSICR1_HSYNC_POL; + if (pcdev->platform_flags & MX2_CAMERA_SWAP16) + csicr1 |= CSICR1_SWAP16_EN; if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC) csicr1 |= CSICR1_EXT_VSYNC; if (pcdev->platform_flags & MX2_CAMERA_CCIR) @@ -1064,6 +1033,8 @@ static int mx2_camera_set_bus_param(stru csicr1 |= CSICR1_GCLK_MODE; if (pcdev->platform_flags & MX2_CAMERA_INV_DATA) csicr1 |= CSICR1_INV_DATA; + if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB) + csicr1 |= CSICR1_PACK_DIR; pcdev->csicr1 = csicr1; @@ -1138,8 +1109,7 @@ static int mx2_camera_get_formats(struct return 0; } - if (code == V4L2_MBUS_FMT_YUYV8_2X8 || - code == V4L2_MBUS_FMT_UYVY8_2X8) { + if (code == V4L2_MBUS_FMT_YUYV8_2X8) { formats++; if (xlate) { /* @@ -1155,18 +1125,6 @@ static int mx2_camera_get_formats(struct } } - if (code == V4L2_MBUS_FMT_UYVY8_2X8) { - formats++; - if (xlate) { - xlate->host_fmt = - soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8); - xlate->code = code; - dev_dbg(dev, "Providing host format %s for sensor code %d\n", - xlate->host_fmt->name, code); - xlate++; - } - } - /* Generic pass-trough */ formats++; if (xlate) { Index: linux-3.5-rc1/drivers/media/video/s5p-fimc/fimc-core.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-fimc/fimc-core.c +++ linux-3.5-rc1/drivers/media/video/s5p-fimc/fimc-core.c @@ -615,7 +615,7 @@ int fimc_ctrls_create(struct fimc_ctx *c ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS; if (!handler->error) { - v4l2_ctrl_cluster(3, &ctrls->colorfx); + v4l2_ctrl_cluster(2, &ctrls->colorfx); ctrls->ready = true; } Index: linux-3.5-rc1/drivers/media/video/s5p-mfc/regs-mfc.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-mfc/regs-mfc.h +++ linux-3.5-rc1/drivers/media/video/s5p-mfc/regs-mfc.h @@ -164,10 +164,15 @@ decoded pic */ #define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */ #define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */ + #define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to decode a frame */ #define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */ +#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */ +#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */ +#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */ + #define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */ #define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */ #define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */ Index: linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_dec.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -627,13 +627,13 @@ static int s5p_mfc_dec_s_ctrl(struct v4l switch (ctrl->id) { case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY: - ctx->loop_filter_mpeg4 = ctrl->val; + ctx->display_delay = ctrl->val; break; case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE: ctx->display_delay_enable = ctrl->val; break; case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: - ctx->display_delay = ctrl->val; + ctx->loop_filter_mpeg4 = ctrl->val; break; case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: ctx->slice_interface = ctrl->val; Index: linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_enc.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -243,12 +243,6 @@ static struct mfc_control controls[] = { .minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, .maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0, .default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, - .menu_skip_mask = ~( - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) | - (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1) - ), }, { .id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL, @@ -494,7 +488,7 @@ static struct mfc_control controls[] = { .type = V4L2_CTRL_TYPE_MENU, .minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED, .maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED, - .default_value = 0, + .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED, .menu_skip_mask = 0, }, { @@ -534,7 +528,7 @@ static struct mfc_control controls[] = { .type = V4L2_CTRL_TYPE_MENU, .minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE, .maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE, - .default_value = 0, + .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE, .menu_skip_mask = 0, }, { @@ -907,6 +901,8 @@ static int vidioc_try_fmt(struct file *f mfc_err("failed to try output format\n"); return -EINVAL; } + v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1, + &pix_fmt_mp->height, 4, 1080, 1, 0); } else { mfc_err("invalid buf type\n"); return -EINVAL; Index: linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_opr.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-mfc/s5p_mfc_opr.h +++ linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_opr.h @@ -57,10 +57,12 @@ void s5p_mfc_cleanup_queue(struct list_h S5P_FIMV_SI_DISPLAY_Y_ADR) << \ MFC_OFFSET_SHIFT) #define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \ - S5P_FIMV_SI_DISPLAY_Y_ADR) << \ + S5P_FIMV_SI_DECODE_Y_ADR) << \ MFC_OFFSET_SHIFT) #define s5p_mfc_get_dspl_status() readl(dev->regs_base + \ S5P_FIMV_SI_DISPLAY_STATUS) +#define s5p_mfc_get_dec_status() readl(dev->regs_base + \ + S5P_FIMV_SI_DECODE_STATUS) #define s5p_mfc_get_frame_type() (readl(dev->regs_base + \ S5P_FIMV_DECODE_FRAME_TYPE) \ & S5P_FIMV_DECODE_FRAME_MASK) Index: linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_shm.h =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/s5p-mfc/s5p_mfc_shm.h +++ linux-3.5-rc1/drivers/media/video/s5p-mfc/s5p_mfc_shm.h @@ -13,8 +13,7 @@ #ifndef S5P_MFC_SHM_H_ #define S5P_MFC_SHM_H_ -enum MFC_SHM_OFS -{ +enum MFC_SHM_OFS { EXTENEDED_DECODE_STATUS = 0x00, /* D */ SET_FRAME_TAG = 0x04, /* D */ GET_FRAME_TAG_TOP = 0x08, /* D */ Index: linux-3.5-rc1/drivers/media/video/smiapp/Kconfig =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/smiapp/Kconfig +++ linux-3.5-rc1/drivers/media/video/smiapp/Kconfig @@ -1,6 +1,6 @@ config VIDEO_SMIAPP tristate "SMIA++/SMIA sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK select VIDEO_SMIAPP_PLL ---help--- This is a generic driver for SMIA++/SMIA camera modules. Index: linux-3.5-rc1/drivers/media/video/smiapp/smiapp-core.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/smiapp/smiapp-core.c +++ linux-3.5-rc1/drivers/media/video/smiapp/smiapp-core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include Index: linux-3.5-rc1/drivers/media/video/tuner-core.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/tuner-core.c +++ linux-3.5-rc1/drivers/media/video/tuner-core.c @@ -1178,7 +1178,7 @@ static int tuner_g_tuner(struct v4l2_sub return 0; if (vt->type == t->mode && analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); - if (t->mode != V4L2_TUNER_RADIO) { + if (vt->type != V4L2_TUNER_RADIO) { vt->capability |= V4L2_TUNER_CAP_NORM; vt->rangelow = tv_range[0] * 16; vt->rangehigh = tv_range[1] * 16; Index: linux-3.5-rc1/drivers/media/video/v4l2-dev.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/v4l2-dev.c +++ linux-3.5-rc1/drivers/media/video/v4l2-dev.c @@ -656,7 +656,7 @@ static void determine_valid_ioctls(struc SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd); SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd); SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd); - if (ops->vidioc_g_parm || vdev->current_norm) + if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER) set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls); SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm); SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner); @@ -679,6 +679,8 @@ static void determine_valid_ioctls(struc SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset); SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings); SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings); + SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings); /* yes, really vidioc_subscribe_event */ SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event); SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event); Index: linux-3.5-rc1/drivers/media/video/v4l2-ioctl.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/v4l2-ioctl.c +++ linux-3.5-rc1/drivers/media/video/v4l2-ioctl.c @@ -1680,6 +1680,7 @@ static long __video_do_ioctl(struct file break; ret = 0; + p->parm.capture.readbuffers = 2; if (ops->vidioc_g_std) ret = ops->vidioc_g_std(file, fh, &std); if (ret == 0) Index: linux-3.5-rc1/drivers/media/video/vino.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/vino.c +++ linux-3.5-rc1/drivers/media/video/vino.c @@ -2561,7 +2561,7 @@ static int vino_acquire_input(struct vin } else if (vino_drvdata->decoder && (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) { int input; - int data_norm; + int data_norm = 0; v4l2_std_id norm; input = VINO_INPUT_COMPOSITE; @@ -2651,7 +2651,7 @@ static int vino_set_input(struct vino_ch } if (vino_drvdata->decoder_owner == vcs->channel) { - int data_norm; + int data_norm = 0; v4l2_std_id norm; ret = decoder_call(video, s_routing, Index: linux-3.5-rc1/drivers/media/video/vivi.c =================================================================== --- linux-3.5-rc1.orig/drivers/media/video/vivi.c +++ linux-3.5-rc1/drivers/media/video/vivi.c @@ -1149,10 +1149,14 @@ static ssize_t vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct vivi_dev *dev = video_drvdata(file); + int err; dprintk(dev, 1, "read called\n"); - return vb2_read(&dev->vb_vidq, data, count, ppos, + mutex_lock(&dev->mutex); + err = vb2_read(&dev->vb_vidq, data, count, ppos, file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->mutex); + return err; } static unsigned int Index: linux-3.5-rc1/drivers/mmc/card/block.c =================================================================== --- linux-3.5-rc1.orig/drivers/mmc/card/block.c +++ linux-3.5-rc1/drivers/mmc/card/block.c @@ -554,7 +554,6 @@ static u32 mmc_sd_num_wr_blocks(struct m struct mmc_request mrq = {NULL}; struct mmc_command cmd = {0}; struct mmc_data data = {0}; - unsigned int timeout_us; struct scatterlist sg; @@ -574,23 +573,12 @@ static u32 mmc_sd_num_wr_blocks(struct m cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - data.timeout_ns = card->csd.tacc_ns * 100; - data.timeout_clks = card->csd.tacc_clks * 100; - - timeout_us = data.timeout_ns / 1000; - timeout_us += data.timeout_clks * 1000 / - (card->host->ios.clock / 1000); - - if (timeout_us > 100000) { - data.timeout_ns = 100000000; - data.timeout_clks = 0; - } - data.blksz = 4; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; + mmc_set_data_timeout(&data, card); mrq.cmd = &cmd; mrq.data = &data; Index: linux-3.5-rc1/drivers/mmc/host/omap_hsmmc.c =================================================================== --- linux-3.5-rc1.orig/drivers/mmc/host/omap_hsmmc.c +++ linux-3.5-rc1/drivers/mmc/host/omap_hsmmc.c @@ -85,7 +85,6 @@ #define BRR_ENABLE (1 << 5) #define DTO_ENABLE (1 << 20) #define INIT_STREAM (1 << 1) -#define ACEN_ACMD12 (1 << 2) #define DP_SELECT (1 << 21) #define DDIR (1 << 4) #define DMA_EN 0x1 @@ -117,7 +116,6 @@ #define OMAP_MMC_MAX_CLOCK 52000000 #define DRIVER_NAME "omap_hsmmc" -#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -177,7 +175,6 @@ struct omap_hsmmc_host { int reqs_blocked; int use_reg; int req_in_progress; - unsigned int flags; struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; @@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsm cmdtype = 0x3; cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); - if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode)) - cmdreg |= ACEN_ACMD12; if (data) { cmdreg |= DP_SELECT | MSBS | BCE; @@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_h else data->bytes_xfered = 0; - if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) { - omap_hsmmc_start_command(host, data->stop, NULL); - } else { - if (data->stop) - data->stop->resp[0] = OMAP_HSMMC_READ(host->base, - RSP76); + if (!data->stop) { omap_hsmmc_request_done(host, data->mrq); + return; } + omap_hsmmc_start_command(host, data->stop, NULL); } /* @@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(st host->mapbase = res->start + pdata->reg_offset; host->base = ioremap(host->mapbase, SZ_4K); host->power_mode = MMC_POWER_OFF; - host->flags = AUTO_CMD12; host->next_data.cookie = 1; platform_set_drvdata(pdev, host); Index: linux-3.5-rc1/drivers/mtd/ubi/debug.c =================================================================== --- linux-3.5-rc1.orig/drivers/mtd/ubi/debug.c +++ linux-3.5-rc1/drivers/mtd/ubi/debug.c @@ -264,7 +264,7 @@ static struct dentry *dfs_rootdir; */ int ubi_debugfs_init(void) { - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; dfs_rootdir = debugfs_create_dir("ubi", NULL); @@ -284,7 +284,7 @@ int ubi_debugfs_init(void) */ void ubi_debugfs_exit(void) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove(dfs_rootdir); } @@ -407,7 +407,7 @@ int ubi_debugfs_init_dev(struct ubi_devi struct dentry *dent; struct ubi_debug_info *d = ubi->dbg; - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME, @@ -477,6 +477,6 @@ out: */ void ubi_debugfs_exit_dev(struct ubi_device *ubi) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove_recursive(ubi->dbg->dfs_dir); } Index: linux-3.5-rc1/drivers/net/bonding/bond_procfs.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/bonding/bond_procfs.c +++ linux-3.5-rc1/drivers/net/bonding/bond_procfs.c @@ -150,14 +150,25 @@ static void bond_info_show_master(struct } } +static const char *bond_slave_link_status(s8 link) +{ + static const char * const status[] = { + [BOND_LINK_UP] = "up", + [BOND_LINK_FAIL] = "going down", + [BOND_LINK_DOWN] = "down", + [BOND_LINK_BACK] = "going back", + }; + + return status[link]; +} + static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave) { struct bonding *bond = seq->private; seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name); - seq_printf(seq, "MII Status: %s\n", - (slave->link == BOND_LINK_UP) ? "up" : "down"); + seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link)); if (slave->speed == SPEED_UNKNOWN) seq_printf(seq, "Speed: %s\n", "Unknown"); else Index: linux-3.5-rc1/drivers/net/caif/caif_hsi.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/caif/caif_hsi.c +++ linux-3.5-rc1/drivers/net/caif/caif_hsi.c @@ -693,8 +693,6 @@ static void cfhsi_rx_done(struct cfhsi * */ memcpy(rx_buf, (u8 *)piggy_desc, CFHSI_DESC_SHORT_SZ); - /* Mark no embedded frame here */ - piggy_desc->offset = 0; if (desc_pld_len == -EPROTO) goto out_of_sync; } @@ -737,6 +735,8 @@ static void cfhsi_rx_done(struct cfhsi * /* Extract any payload in piggyback descriptor. */ if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0) goto out_of_sync; + /* Mark no embedded frame after extracting it */ + piggy_desc->offset = 0; } } @@ -1178,6 +1178,7 @@ int cfhsi_probe(struct platform_device * dev_err(&ndev->dev, "%s: Registration error: %d.\n", __func__, res); free_netdev(ndev); + return -ENODEV; } /* Add CAIF HSI device to list. */ spin_lock(&cfhsi_list_lock); Index: linux-3.5-rc1/drivers/net/can/c_can/c_can.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/can/c_can/c_can.c +++ linux-3.5-rc1/drivers/net/can/c_can/c_can.c @@ -590,8 +590,8 @@ static void c_can_chip_config(struct net priv->write_reg(priv, &priv->regs->control, CONTROL_ENABLE_AR); - if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY & - CAN_CTRLMODE_LOOPBACK)) { + if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && + (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ priv->write_reg(priv, &priv->regs->control, CONTROL_EIE | CONTROL_SIE | CONTROL_IE | CONTROL_TEST); Index: linux-3.5-rc1/drivers/net/can/flexcan.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/can/flexcan.c +++ linux-3.5-rc1/drivers/net/can/flexcan.c @@ -939,12 +939,12 @@ static int __devinit flexcan_probe(struc return PTR_ERR(pinctrl); if (pdev->dev.of_node) { - const u32 *clock_freq_p; + const __be32 *clock_freq_p; clock_freq_p = of_get_property(pdev->dev.of_node, "clock-frequency", NULL); if (clock_freq_p) - clock_freq = *clock_freq_p; + clock_freq = be32_to_cpup(clock_freq_p); } if (!clock_freq) { Index: linux-3.5-rc1/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ linux-3.5-rc1/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -190,7 +190,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struc if ((netif_tx_queue_stopped(txq)) && (bp->state == BNX2X_STATE_OPEN) && - (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)) + (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)) netif_tx_wake_queue(txq); __netif_tx_unlock(txq); @@ -2516,8 +2516,6 @@ int bnx2x_poll(struct napi_struct *napi, /* we split the first BD into headers and data BDs * to ease the pain of our fellow microcode engineers * we use one mapping for both BDs - * So far this has only been observed to happen - * in Other Operating Systems(TM) */ static noinline u16 bnx2x_tx_split(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, @@ -3171,7 +3169,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b txdata->tx_bd_prod += nbd; - if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) { + if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) { netif_tx_stop_queue(txq); /* paired memory barrier is in bnx2x_tx_int(), we have to keep @@ -3180,7 +3178,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b smp_mb(); fp->eth_q_stats.driver_xoff++; - if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3) + if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4) netif_tx_wake_queue(txq); } txdata->tx_pkt++; Index: linux-3.5-rc1/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ linux-3.5-rc1/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -40,6 +40,7 @@ #define I2C_BSC0 0 #define I2C_BSC1 1 #define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) #define MCPR_IMC_COMMAND_READ_OP 1 #define MCPR_IMC_COMMAND_WRITE_OP 2 @@ -7659,6 +7660,28 @@ static int bnx2x_8726_read_sfp_module_ee return -EINVAL; } +static void bnx2x_warpcore_power_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, @@ -7678,6 +7701,12 @@ static int bnx2x_warpcore_read_sfp_modul /* 4 byte aligned address */ addr32 = addr & (~0x3); do { + if (cnt == I2C_WA_PWR_ITER) { + bnx2x_warpcore_power_module(params, phy, 0); + /* Note that 100us are not enough here */ + usleep_range(1000,1000); + bnx2x_warpcore_power_module(params, phy, 1); + } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -8200,29 +8229,6 @@ static void bnx2x_set_sfp_module_fault_l bnx2x_set_e1e2_module_fault_led(params, gpio_mode); } -static void bnx2x_warpcore_power_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - u32 pin_cfg; - struct bnx2x *bp = params->bp; - - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_PWR_DIS_MASK) >> - PORT_HW_CFG_E3_PWR_DIS_SHIFT; - - if (pin_cfg == PIN_CFG_NA) - return; - DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", - power, pin_cfg); - /* Low ==> corresponding SFP+ module is powered - * high ==> the SFP+ module is powered down - */ - bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); -} - static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -9748,7 +9754,7 @@ static int bnx2x_848x3_config_init(struc msleep(1); - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; Index: linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_cmds.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/emulex/benet/be_cmds.c +++ linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -122,15 +122,15 @@ static int be_mcc_compl_process(struct b goto done; if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) { - dev_warn(&adapter->pdev->dev, "This domain(VM) is not " - "permitted to execute this cmd (opcode %d)\n", - opcode); + dev_warn(&adapter->pdev->dev, + "opcode %d-%d is not permitted\n", + opcode, subsystem); } else { extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & CQE_STATUS_EXTD_MASK; - dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:" - "status %d, extd-status %d\n", - opcode, compl_status, extd_status); + dev_err(&adapter->pdev->dev, + "opcode %d-%d failed:status %d-%d\n", + opcode, subsystem, compl_status, extd_status); } } done: Index: linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_cmds.h =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/emulex/benet/be_cmds.h +++ linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1566,7 +1566,7 @@ struct be_hw_stats_v1 { u32 rsvd0[BE_TXP_SW_SZ]; struct be_erx_stats_v1 erx; struct be_pmem_stats pmem; - u32 rsvd1[3]; + u32 rsvd1[18]; }; struct be_cmd_req_get_stats_v1 { Index: linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/emulex/benet/be_main.c +++ linux-3.5-rc1/drivers/net/ethernet/emulex/benet/be_main.c @@ -3237,7 +3237,7 @@ static void be_netdev_init(struct net_de netdev->flags |= IFF_MULTICAST; - netif_set_gso_max_size(netdev, 65535); + netif_set_gso_max_size(netdev, 65535 - ETH_HLEN); netdev->netdev_ops = &be_netdev_ops; Index: linux-3.5-rc1/drivers/net/ethernet/intel/Kconfig =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/Kconfig +++ linux-3.5-rc1/drivers/net/ethernet/intel/Kconfig @@ -122,8 +122,10 @@ config IGB_DCA config IGB_PTP bool "PTP Hardware Clock (PHC)" - default y - depends on IGB && PTP_1588_CLOCK + default n + depends on IGB && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want to use PTP Hardware Clock (PHC) in the driver. Only the basic clock operations have been implemented. @@ -223,7 +225,9 @@ config IXGBE_DCB config IXGBE_PTP bool "PTP Clock Support" default n - depends on IXGBE && PTP_1588_CLOCK + depends on IXGBE && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want support for 1588 Timestamping with a PHC device, using the PTP 1588 Clock support. This is Index: linux-3.5-rc1/drivers/net/ethernet/intel/igb/e1000_82575.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/igb/e1000_82575.c +++ linux-3.5-rc1/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -206,8 +206,6 @@ static s32 igb_get_invariants_82575(stru mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: - case e1000_i210: - case e1000_i211: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: Index: linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe.h =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -196,7 +196,7 @@ enum ixgbe_ring_state_t { __IXGBE_HANG_CHECK_ARMED, __IXGBE_RX_RSC_ENABLED, __IXGBE_RX_CSUM_UDP_ZERO_ERR, - __IXGBE_RX_FCOE_BUFSZ, + __IXGBE_RX_FCOE, }; #define check_for_tx_hang(ring) \ @@ -290,7 +290,7 @@ struct ixgbe_ring_feature { #if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192) static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring) { - return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0; + return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0; } #else #define ixgbe_rx_pg_order(_ring) 0 Index: linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -634,7 +634,7 @@ static int ixgbe_alloc_q_vector(struct i f = &adapter->ring_feature[RING_F_FCOE]; if ((rxr_idx >= f->mask) && (rxr_idx < f->mask + f->indices)) - set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state); + set_bit(__IXGBE_RX_FCOE, &ring->state); } #endif /* IXGBE_FCOE */ Index: linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1058,17 +1058,17 @@ static inline void ixgbe_rx_hash(struct #ifdef IXGBE_FCOE /** * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type - * @adapter: address of board private structure + * @ring: structure containing ring specific data * @rx_desc: advanced rx descriptor * * Returns : true if it is FCoE pkt */ -static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter, +static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, union ixgbe_adv_rx_desc *rx_desc) { __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && + return test_bit(__IXGBE_RX_FCOE, &ring->state) && ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); @@ -1148,7 +1148,7 @@ static bool ixgbe_alloc_mapped_page(stru /* alloc new page for storage */ if (likely(!page)) { - page = alloc_pages(GFP_ATOMIC | __GFP_COLD, + page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, ixgbe_rx_pg_order(rx_ring)); if (unlikely(!page)) { rx_ring->rx_stats.alloc_rx_page_failed++; @@ -1549,6 +1549,12 @@ static bool ixgbe_cleanup_headers(struct skb->truesize -= ixgbe_rx_bufsz(rx_ring); } +#ifdef IXGBE_FCOE + /* do not attempt to pad FCoE Frames as this will disrupt DDP */ + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) + return false; + +#endif /* if skb_pad returns an error the skb was freed */ if (unlikely(skb->len < 60)) { int pad_len = 60 - skb->len; @@ -1775,7 +1781,7 @@ static bool ixgbe_clean_rx_irq(struct ix #ifdef IXGBE_FCOE /* if ddp, not passing to ULD unless for FCP_RSP or error */ - if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { + if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); if (!ddp_bytes) { dev_kfree_skb_any(skb); Index: linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ linux-3.5-rc1/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -708,6 +708,7 @@ void ixgbe_ptp_start_cyclecounter(struct { struct ixgbe_hw *hw = &adapter->hw; u32 incval = 0; + u32 timinca = 0; u32 shift = 0; u32 cycle_speed; unsigned long flags; @@ -730,8 +731,16 @@ void ixgbe_ptp_start_cyclecounter(struct break; } - /* Bail if the cycle speed didn't change */ - if (adapter->cycle_speed == cycle_speed) + /* + * grab the current TIMINCA value from the register so that it can be + * double checked. If the register value has been cleared, it must be + * reset to the correct value for generating a cyclecounter. If + * TIMINCA is zero, the SYSTIME registers do not increment at all. + */ + timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA); + + /* Bail if the cycle speed didn't change and TIMINCA is non-zero */ + if (adapter->cycle_speed == cycle_speed && timinca) return; /* disable the SDP clock out */ Index: linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/en_netdev.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -929,15 +929,20 @@ void mlx4_en_free_resources(struct mlx4_ if (priv->rx_cq[i].buf) mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); } + + if (priv->base_tx_qpn) { + mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num); + priv->base_tx_qpn = 0; + } } int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) { struct mlx4_en_port_profile *prof = priv->prof; int i; - int base_tx_qpn, err; + int err; - err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn); + err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn); if (err) { en_err(priv, "failed reserving range for TX rings\n"); return err; @@ -949,7 +954,7 @@ int mlx4_en_alloc_resources(struct mlx4_ prof->tx_ring_size, i, TX)) goto err; - if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i, + if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i, prof->tx_ring_size, TXBB_SIZE)) goto err; } @@ -969,7 +974,6 @@ int mlx4_en_alloc_resources(struct mlx4_ err: en_err(priv, "Failed to allocate NIC resources\n"); - mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num); return -ENOMEM; } @@ -1204,9 +1208,11 @@ int mlx4_en_init_netdev(struct mlx4_en_d en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num); /* Configure port */ + mlx4_en_calc_rx_buf(dev); err = mlx4_SET_PORT_general(mdev->dev, priv->port, - MLX4_EN_MIN_MTU, - 0, 0, 0, 0); + priv->rx_skb_size + ETH_FCS_LEN, + prof->tx_pause, prof->tx_ppp, + prof->rx_pause, prof->rx_ppp); if (err) { en_err(priv, "Failed setting port general configurations " "for port %d, with error %d\n", priv->port, err); Index: linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/mellanox/mlx4/main.c +++ linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1975,6 +1975,8 @@ slave_start: if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) && !mlx4_is_mfunc(dev)) { dev->flags &= ~MLX4_FLAG_MSI_X; + dev->caps.num_comp_vectors = 1; + dev->caps.comp_pool = 0; pci_disable_msix(pdev); err = mlx4_setup_hca(dev); } Index: linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ linux-3.5-rc1/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -495,6 +495,7 @@ struct mlx4_en_priv { int vids[128]; bool wol; struct device *ddev; + int base_tx_qpn; #ifdef CONFIG_MLX4_EN_DCB struct ieee_ets ets; Index: linux-3.5-rc1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ linux-3.5-rc1/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -479,7 +479,7 @@ qlcnic_init_pci_info(struct qlcnic_adapt for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) { pfn = pci_info[i].id; - if (pfn > QLCNIC_MAX_PCI_FUNC) { + if (pfn >= QLCNIC_MAX_PCI_FUNC) { ret = QL_STATUS_INVALID_PARAM; goto err_eswitch; } Index: linux-3.5-rc1/drivers/net/ethernet/realtek/r8169.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/realtek/r8169.c +++ linux-3.5-rc1/drivers/net/ethernet/realtek/r8169.c @@ -3894,6 +3894,7 @@ static void rtl_init_rxcfg(struct rtl816 case RTL_GIGA_MAC_VER_22: case RTL_GIGA_MAC_VER_23: case RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_34: RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST); break; default: Index: linux-3.5-rc1/drivers/net/ethernet/renesas/sh_eth.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/ethernet/renesas/sh_eth.c +++ linux-3.5-rc1/drivers/net/ethernet/renesas/sh_eth.c @@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_devi } /* Packet receive function */ -static int sh_eth_rx(struct net_device *ndev) +static int sh_eth_rx(struct net_device *ndev, u32 intr_status) { struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_rxdesc *rxdesc; @@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device * /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) { - /* fix the values for the next receiving */ - mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) - - sh_eth_read(ndev, RDLAR)) >> 4; + /* fix the values for the next receiving if RDE is set */ + if (intr_status & EESR_RDE) + mdp->cur_rx = mdp->dirty_rx = + (sh_eth_read(ndev, RDFAR) - + sh_eth_read(ndev, RDLAR)) >> 4; sh_eth_write(ndev, EDRRR_R, EDRRR); } @@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int EESR_RTSF | /* short frame recv */ EESR_PRE | /* PHY-LSI recv error */ EESR_CERF)){ /* recv frame CRC error */ - sh_eth_rx(ndev); + sh_eth_rx(ndev, intr_status); } /* Tx Check */ Index: linux-3.5-rc1/drivers/net/phy/micrel.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/phy/micrel.c +++ linux-3.5-rc1/drivers/net/phy/micrel.c @@ -161,7 +161,7 @@ static struct phy_driver ks8051_driver = static struct phy_driver ks8001_driver = { .phy_id = PHY_ID_KS8001, .name = "Micrel KS8001 or KS8721", - .phy_id_mask = 0x00fffff0, + .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, @@ -174,7 +174,7 @@ static struct phy_driver ks8001_driver = static struct phy_driver ksz9021_driver = { .phy_id = PHY_ID_KSZ9021, - .phy_id_mask = 0x000fff10, + .phy_id_mask = 0x000ffffe, .name = "Micrel KSZ9021 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), @@ -240,8 +240,8 @@ MODULE_AUTHOR("David J. Choi"); MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { - { PHY_ID_KSZ9021, 0x000fff10 }, - { PHY_ID_KS8001, 0x00fffff0 }, + { PHY_ID_KSZ9021, 0x000ffffe }, + { PHY_ID_KS8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KS8041, 0x00fffff0 }, { PHY_ID_KS8051, 0x00fffff0 }, Index: linux-3.5-rc1/drivers/net/usb/ipheth.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/usb/ipheth.c +++ linux-3.5-rc1/drivers/net/usb/ipheth.c @@ -59,6 +59,7 @@ #define USB_PRODUCT_IPHONE_3G 0x1292 #define USB_PRODUCT_IPHONE_3GS 0x1294 #define USB_PRODUCT_IPHONE_4 0x1297 +#define USB_PRODUCT_IPAD 0x129a #define USB_PRODUCT_IPHONE_4_VZW 0x129c #define USB_PRODUCT_IPHONE_4S 0x12a0 @@ -101,6 +102,10 @@ static struct usb_device_id ipheth_table IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPAD, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, Index: linux-3.5-rc1/drivers/net/usb/qmi_wwan.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/usb/qmi_wwan.c +++ linux-3.5-rc1/drivers/net/usb/qmi_wwan.c @@ -257,29 +257,6 @@ err: return rv; } -/* Gobi devices uses identical class/protocol codes for all interfaces regardless - * of function. Some of these are CDC ACM like and have the exact same endpoints - * we are looking for. This leaves two possible strategies for identifying the - * correct interface: - * a) hardcoding interface number, or - * b) use the fact that the wwan interface is the only one lacking additional - * (CDC functional) descriptors - * - * Let's see if we can get away with the generic b) solution. - */ -static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf) -{ - int rv = -EINVAL; - - /* ignore any interface with additional descriptors */ - if (intf->cur_altsetting->extralen) - goto err; - - rv = qmi_wwan_bind_shared(dev, intf); -err: - return rv; -} - static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf) { struct usb_driver *subdriver = (void *)dev->data[0]; @@ -347,15 +324,15 @@ static const struct driver_info qmi_wwan .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_gobi = { - .description = "Qualcomm Gobi wwan/QMI device", +static const struct driver_info qmi_wwan_force_int0 = { + .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, + .data = BIT(0), /* interface whitelist bitmap */ }; -/* ZTE suck at making USB descriptors */ static const struct driver_info qmi_wwan_force_int1 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -365,6 +342,15 @@ static const struct driver_info qmi_wwan .data = BIT(1), /* interface whitelist bitmap */ }; +static const struct driver_info qmi_wwan_force_int3 = { + .description = "Qualcomm WWAN/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_shared, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(3), /* interface whitelist bitmap */ +}; + static const struct driver_info qmi_wwan_force_int4 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -390,16 +376,23 @@ static const struct driver_info qmi_wwan static const struct driver_info qmi_wwan_sierra = { .description = "Sierra Wireless wwan/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ }; #define HUAWEI_VENDOR_ID 0x12D1 + +/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ +#define QMI_GOBI1K_DEVICE(vend, prod) \ + USB_DEVICE(vend, prod), \ + .driver_info = (unsigned long)&qmi_wwan_force_int3 + +/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_gobi + .driver_info = (unsigned long)&qmi_wwan_force_int0 static const struct usb_device_id products[] = { { /* Huawei E392, E398 and possibly others sharing both device id and more... */ @@ -510,20 +503,24 @@ static const struct usb_device_id produc .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_sierra, }, - {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ - {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ - {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ - {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ - {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 1000 devices */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ + {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ Index: linux-3.5-rc1/drivers/net/usb/usbnet.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/usb/usbnet.c +++ linux-3.5-rc1/drivers/net/usb/usbnet.c @@ -796,11 +796,13 @@ int usbnet_open (struct net_device *net) if (info->manage_power) { retval = info->manage_power(dev, 1); if (retval < 0) - goto done; + goto done_manage_power_error; usb_autopm_put_interface(dev->intf); } return retval; +done_manage_power_error: + clear_bit(EVENT_DEV_OPEN, &dev->flags); done: usb_autopm_put_interface(dev->intf); done_nopm: @@ -876,9 +878,9 @@ void usbnet_get_drvinfo (struct net_devi { struct usbnet *dev = netdev_priv(net); - strncpy (info->driver, dev->driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, + strlcpy (info->driver, dev->driver_name, sizeof info->driver); + strlcpy (info->version, DRIVER_VERSION, sizeof info->version); + strlcpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } @@ -1202,6 +1204,21 @@ deferred: } EXPORT_SYMBOL_GPL(usbnet_start_xmit); +static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +{ + struct urb *urb; + int i; + + /* don't refill the queue all at once */ + for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { + urb = usb_alloc_urb(0, flags); + if (urb != NULL) { + if (rx_submit(dev, urb, flags) == -ENOLINK) + return; + } + } +} + /*-------------------------------------------------------------------------*/ // tasklet (work deferred from completions, in_irq) or timer @@ -1241,26 +1258,14 @@ static void usbnet_bh (unsigned long par !timer_pending (&dev->delay) && !test_bit (EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; - int qlen = RX_QLEN (dev); - if (temp < qlen) { - struct urb *urb; - int i; - - // don't refill the queue all at once - for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { - urb = usb_alloc_urb (0, GFP_ATOMIC); - if (urb != NULL) { - if (rx_submit (dev, urb, GFP_ATOMIC) == - -ENOLINK) - return; - } - } + if (temp < RX_QLEN(dev)) { + rx_alloc_submit(dev, GFP_ATOMIC); if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", temp, dev->rxq.qlen); - if (dev->rxq.qlen < qlen) + if (dev->rxq.qlen < RX_QLEN(dev)) tasklet_schedule (&dev->bh); } if (dev->txq.qlen < TX_QLEN (dev)) @@ -1513,6 +1518,7 @@ int usbnet_suspend (struct usb_interface spin_lock_irq(&dev->txq.lock); /* don't autosuspend while transmitting */ if (dev->txq.qlen && PMSG_IS_AUTO(message)) { + dev->suspend_count--; spin_unlock_irq(&dev->txq.lock); return -EBUSY; } else { @@ -1569,6 +1575,13 @@ int usbnet_resume (struct usb_interface spin_unlock_irq(&dev->txq.lock); if (test_bit(EVENT_DEV_OPEN, &dev->flags)) { + /* handle remote wakeup ASAP */ + if (!dev->wait && + netif_device_present(dev->net) && + !timer_pending(&dev->delay) && + !test_bit(EVENT_RX_HALT, &dev->flags)) + rx_alloc_submit(dev, GFP_KERNEL); + if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); tasklet_schedule (&dev->bh); Index: linux-3.5-rc1/drivers/net/wireless/airo.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/airo.c +++ linux-3.5-rc1/drivers/net/wireless/airo.c @@ -7233,8 +7233,8 @@ static int airo_get_aplist(struct net_de } } else { dwrq->flags = 1; /* Should be define'd */ - memcpy(extra + sizeof(struct sockaddr)*i, - &qual, sizeof(struct iw_quality)*i); + memcpy(extra + sizeof(struct sockaddr) * i, qual, + sizeof(struct iw_quality) * i); } dwrq->length = i; Index: linux-3.5-rc1/drivers/net/wireless/ath/ath5k/base.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath5k/base.c +++ linux-3.5-rc1/drivers/net/wireless/ath/ath5k/base.c @@ -1045,11 +1045,11 @@ ath5k_drain_tx_buffs(struct ath5k_hw *ah ath5k_txbuf_free_skb(ah, bf); - spin_lock_bh(&ah->txbuflock); + spin_lock(&ah->txbuflock); list_move_tail(&bf->list, &ah->txbuf); ah->txbuf_len++; txq->txq_len--; - spin_unlock_bh(&ah->txbuflock); + spin_unlock(&ah->txbuflock); } txq->link = NULL; txq->txq_poll_mark = false; Index: linux-3.5-rc1/drivers/net/wireless/ath/ath9k/ath9k.h =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath9k/ath9k.h +++ linux-3.5-rc1/drivers/net/wireless/ath/ath9k/ath9k.h @@ -214,6 +214,7 @@ struct ath_frame_info { enum ath9k_key_type keytype; u8 keyix; u8 retries; + u8 rtscts_rate; }; struct ath_buf_state { Index: linux-3.5-rc1/drivers/net/wireless/ath/ath9k/htc_drv_main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ linux-3.5-rc1/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1496,6 +1496,7 @@ static void ath9k_htc_bss_info_changed(s priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--; if (priv->ah->opmode == NL80211_IFTYPE_STATION) { + ath9k_htc_choose_set_bssid(priv); if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1)) ath9k_htc_start_ani(priv); else if (priv->num_sta_assoc_vif == 0) @@ -1503,13 +1504,11 @@ static void ath9k_htc_bss_info_changed(s } } - if (changed & BSS_CHANGED_BSSID) { + if (changed & BSS_CHANGED_IBSS) { if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) { common->curaid = bss_conf->aid; memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); ath9k_htc_set_bssid(priv); - } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) { - ath9k_htc_choose_set_bssid(priv); } } Index: linux-3.5-rc1/drivers/net/wireless/ath/ath9k/hw.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath9k/hw.c +++ linux-3.5-rc1/drivers/net/wireless/ath/ath9k/hw.c @@ -784,13 +784,25 @@ static void ath9k_hw_init_qos(struct ath u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah) { + struct ath_common *common = ath9k_hw_common(ah); + int i = 0; + REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); udelay(100); REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); - while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) + while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) { + udelay(100); + if (WARN_ON_ONCE(i >= 100)) { + ath_err(common, "PLL4 meaurement not done\n"); + break; + } + + i++; + } + return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3; } EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc); Index: linux-3.5-rc1/drivers/net/wireless/ath/ath9k/main.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath9k/main.c +++ linux-3.5-rc1/drivers/net/wireless/ath/ath9k/main.c @@ -971,6 +971,15 @@ void ath_hw_pll_work(struct work_struct hw_pll_work.work); u32 pll_sqsum; + /* + * ensure that the PLL WAR is executed only + * after the STA is associated (or) if the + * beaconing had started in interfaces that + * uses beacons. + */ + if (!(sc->sc_flags & SC_OP_BEACONS)) + return; + if (AR_SREV_9485(sc->sc_ah)) { ath9k_ps_wakeup(sc); @@ -1443,15 +1452,6 @@ static int ath9k_add_interface(struct ie } } - if ((ah->opmode == NL80211_IFTYPE_ADHOC) || - ((vif->type == NL80211_IFTYPE_ADHOC) && - sc->nvifs > 0)) { - ath_err(common, "Cannot create ADHOC interface when other" - " interfaces already exist.\n"); - ret = -EINVAL; - goto out; - } - ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); sc->nvifs++; @@ -1476,15 +1476,6 @@ static int ath9k_change_interface(struct mutex_lock(&sc->mutex); ath9k_ps_wakeup(sc); - /* See if new interface type is valid. */ - if ((new_type == NL80211_IFTYPE_ADHOC) && - (sc->nvifs > 1)) { - ath_err(common, "When using ADHOC, it must be the only" - " interface.\n"); - ret = -EINVAL; - goto out; - } - if (ath9k_uses_beacons(new_type) && !ath9k_uses_beacons(vif->type)) { if (sc->nbcnvifs >= ATH_BCBUF) { Index: linux-3.5-rc1/drivers/net/wireless/ath/ath9k/xmit.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ath/ath9k/xmit.c +++ linux-3.5-rc1/drivers/net/wireless/ath/ath9k/xmit.c @@ -938,6 +938,7 @@ static void ath_buf_set_rate(struct ath_ struct ieee80211_tx_rate *rates; const struct ieee80211_rate *rate; struct ieee80211_hdr *hdr; + struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu); int i; u8 rix = 0; @@ -948,18 +949,7 @@ static void ath_buf_set_rate(struct ath_ /* set dur_update_en for l-sig computation except for PS-Poll frames */ info->dur_update = !ieee80211_is_pspoll(hdr->frame_control); - - /* - * We check if Short Preamble is needed for the CTS rate by - * checking the BSS's global flag. - * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. - */ - rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info); - info->rtscts_rate = rate->hw_value; - - if (tx_info->control.vif && - tx_info->control.vif->bss_conf.use_short_preamble) - info->rtscts_rate |= rate->hw_value_short; + info->rtscts_rate = fi->rtscts_rate; for (i = 0; i < 4; i++) { bool is_40, is_sgi, is_sp; @@ -1001,13 +991,13 @@ static void ath_buf_set_rate(struct ath_ } /* legacy rates */ + rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; if ((tx_info->band == IEEE80211_BAND_2GHZ) && !(rate->flags & IEEE80211_RATE_ERP_G)) phy = WLAN_RC_PHY_CCK; else phy = WLAN_RC_PHY_OFDM; - rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; info->rates[i].Rate = rate->hw_value; if (rate->hw_value_short) { if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) @@ -1776,10 +1766,22 @@ static void setup_frame_info(struct ieee struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const struct ieee80211_rate *rate; struct ath_frame_info *fi = get_frame_info(skb); struct ath_node *an = NULL; enum ath9k_key_type keytype; + bool short_preamble = false; + + /* + * We check if Short Preamble is needed for the CTS rate by + * checking the BSS's global flag. + * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. + */ + if (tx_info->control.vif && + tx_info->control.vif->bss_conf.use_short_preamble) + short_preamble = true; + rate = ieee80211_get_rts_cts_rate(hw, tx_info); keytype = ath9k_cmn_get_hw_crypto_keytype(skb); if (sta) @@ -1794,6 +1796,9 @@ static void setup_frame_info(struct ieee fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; + fi->rtscts_rate = rate->hw_value; + if (short_preamble) + fi->rtscts_rate |= rate->hw_value_short; } u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate) Index: linux-3.5-rc1/drivers/net/wireless/iwlwifi/iwl-debugfs.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ linux-3.5-rc1/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -2239,6 +2239,7 @@ static ssize_t iwl_dbgfs_echo_test_write return count; } +#ifdef CONFIG_IWLWIFI_DEBUG static ssize_t iwl_dbgfs_log_event_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -2276,6 +2277,7 @@ static ssize_t iwl_dbgfs_log_event_write return count; } +#endif static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file, char __user *user_buf, @@ -2345,7 +2347,9 @@ DEBUGFS_READ_FILE_OPS(bt_traffic); DEBUGFS_READ_WRITE_FILE_OPS(protection_mode); DEBUGFS_READ_FILE_OPS(reply_tx_error); DEBUGFS_WRITE_FILE_OPS(echo_test); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_READ_WRITE_FILE_OPS(log_event); +#endif DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled); /* @@ -2405,7 +2409,9 @@ int iwl_dbgfs_register(struct iwl_priv * DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR); +#endif if (iwl_advanced_bt_coexist(priv)) DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR); Index: linux-3.5-rc1/drivers/net/wireless/mwifiex/cfg80211.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/mwifiex/cfg80211.c +++ linux-3.5-rc1/drivers/net/wireless/mwifiex/cfg80211.c @@ -1484,7 +1484,7 @@ struct net_device *mwifiex_add_virtual_i struct wireless_dev *wdev; if (!adapter) - return NULL; + return ERR_PTR(-EFAULT); switch (type) { case NL80211_IFTYPE_UNSPECIFIED: @@ -1494,12 +1494,12 @@ struct net_device *mwifiex_add_virtual_i if (priv->bss_mode) { wiphy_err(wiphy, "cannot create multiple sta/adhoc ifaces\n"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); wdev->wiphy = wiphy; priv->wdev = wdev; @@ -1522,12 +1522,12 @@ struct net_device *mwifiex_add_virtual_i if (priv->bss_mode) { wiphy_err(wiphy, "Can't create multiple AP interfaces"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); priv->wdev = wdev; wdev->wiphy = wiphy; @@ -1544,14 +1544,15 @@ struct net_device *mwifiex_add_virtual_i break; default: wiphy_err(wiphy, "type not supported\n"); - return NULL; + return ERR_PTR(-EINVAL); } dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name, ether_setup, 1); if (!dev) { wiphy_err(wiphy, "no memory available for netdevice\n"); - goto error; + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-ENOMEM); } mwifiex_init_priv_params(priv, dev); @@ -1582,7 +1583,9 @@ struct net_device *mwifiex_add_virtual_i /* Register network device */ if (register_netdevice(dev)) { wiphy_err(wiphy, "cannot register virtual network device\n"); - goto error; + free_netdev(dev); + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-EFAULT); } sema_init(&priv->async_sem, 1); @@ -1594,12 +1597,6 @@ struct net_device *mwifiex_add_virtual_i mwifiex_dev_debugfs_init(priv); #endif return dev; -error: - if (dev && (dev->reg_state == NETREG_UNREGISTERED)) - free_netdev(dev); - priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; - - return NULL; } EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); Index: linux-3.5-rc1/drivers/net/wireless/mwifiex/txrx.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/mwifiex/txrx.c +++ linux-3.5-rc1/drivers/net/wireless/mwifiex/txrx.c @@ -161,15 +161,11 @@ int mwifiex_write_data_complete(struct m goto done; for (i = 0; i < adapter->priv_num; i++) { - tpriv = adapter->priv[i]; - if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) && - (tpriv->media_connected)) { - if (netif_queue_stopped(tpriv->netdev)) - mwifiex_wake_up_net_dev_queue(tpriv->netdev, - adapter); - } + if (tpriv->media_connected && + netif_queue_stopped(tpriv->netdev)) + mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter); } done: dev_kfree_skb_any(skb); Index: linux-3.5-rc1/drivers/net/wireless/mwifiex/uap_cmd.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/mwifiex/uap_cmd.c +++ linux-3.5-rc1/drivers/net/wireless/mwifiex/uap_cmd.c @@ -27,6 +27,17 @@ int mwifiex_set_secure_params(struct mwi struct cfg80211_ap_settings *params) { int i; + if (!params->privacy) { + bss_config->protocol = PROTOCOL_NO_SECURITY; + bss_config->key_mgmt = KEY_MGMT_NONE; + bss_config->wpa_cfg.length = 0; + priv->sec_info.wep_enabled = 0; + priv->sec_info.wpa_enabled = 0; + priv->sec_info.wpa2_enabled = 0; + + return 0; + } + switch (params->auth_type) { case NL80211_AUTHTYPE_OPEN_SYSTEM: bss_config->auth_mode = WLAN_AUTH_OPEN; Index: linux-3.5-rc1/drivers/net/wireless/rndis_wlan.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/rndis_wlan.c +++ linux-3.5-rc1/drivers/net/wireless/rndis_wlan.c @@ -2110,7 +2110,7 @@ resize_buf: while (check_bssid_list_item(bssid, bssid_len, buf, len)) { if (rndis_bss_info_update(usbdev, bssid) && match_bssid && matched) { - if (!ether_addr_equal(bssid->mac, match_bssid)) + if (ether_addr_equal(bssid->mac, match_bssid)) *matched = true; } Index: linux-3.5-rc1/drivers/net/wireless/ti/wl1251/acx.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ti/wl1251/acx.c +++ linux-3.5-rc1/drivers/net/wireless/ti/wl1251/acx.c @@ -869,7 +869,7 @@ int wl1251_acx_tsf_info(struct wl1251 *w } *mactime = tsf_info->current_tsf_lsb | - (tsf_info->current_tsf_msb << 31); + ((u64)tsf_info->current_tsf_msb << 32); out: kfree(tsf_info); Index: linux-3.5-rc1/drivers/net/wireless/ti/wl1251/event.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ti/wl1251/event.c +++ linux-3.5-rc1/drivers/net/wireless/ti/wl1251/event.c @@ -76,8 +76,7 @@ static int wl1251_event_process(struct w } } - if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && - wl->station_mode != STATION_ACTIVE_MODE) { + if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) { wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT"); /* indicate to the stack, that beacons have been lost */ Index: linux-3.5-rc1/drivers/net/wireless/ti/wl1251/spi.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/wireless/ti/wl1251/spi.c +++ linux-3.5-rc1/drivers/net/wireless/ti/wl1251/spi.c @@ -73,6 +73,8 @@ static void wl1251_spi_reset(struct wl12 spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_wake(struct wl1251 *wl) @@ -127,6 +129,8 @@ static void wl1251_spi_wake(struct wl125 spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_reset_wake(struct wl1251 *wl) Index: linux-3.5-rc1/drivers/net/xen-netfront.c =================================================================== --- linux-3.5-rc1.orig/drivers/net/xen-netfront.c +++ linux-3.5-rc1/drivers/net/xen-netfront.c @@ -1935,14 +1935,14 @@ static int __devexit xennet_remove(struc dev_dbg(&dev->dev, "%s\n", dev->nodename); - unregister_netdev(info->netdev); - xennet_disconnect_backend(info); - del_timer_sync(&info->rx_refill_timer); - xennet_sysfs_delif(info->netdev); + unregister_netdev(info->netdev); + + del_timer_sync(&info->rx_refill_timer); + free_percpu(info->stats); free_netdev(info->netdev); Index: linux-3.5-rc1/drivers/oprofile/oprofile_perf.c =================================================================== --- linux-3.5-rc1.orig/drivers/oprofile/oprofile_perf.c +++ linux-3.5-rc1/drivers/oprofile/oprofile_perf.c @@ -25,7 +25,7 @@ static int oprofile_perf_enabled; static DEFINE_MUTEX(oprofile_perf_mutex); static struct op_counter_config *counter_config; -static struct perf_event **perf_events[nr_cpumask_bits]; +static struct perf_event **perf_events[NR_CPUS]; static int num_counters; /* Index: linux-3.5-rc1/drivers/regulator/palmas-regulator.c =================================================================== --- linux-3.5-rc1.orig/drivers/regulator/palmas-regulator.c +++ linux-3.5-rc1/drivers/regulator/palmas-regulator.c @@ -673,7 +673,9 @@ static __devinit int palmas_probe(struct pmic->desc[id].ops = &palmas_ops_smps10; pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL; pmic->desc[id].vsel_mask = SMPS10_VSEL; - pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS; + pmic->desc[id].enable_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_STATUS); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; } @@ -739,7 +741,8 @@ static __devinit int palmas_probe(struct pmic->desc[id].type = REGULATOR_VOLTAGE; pmic->desc[id].owner = THIS_MODULE; - pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr; + pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].ctrl_addr); pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; if (pdata && pdata->reg_data) Index: linux-3.5-rc1/drivers/regulator/tps65023-regulator.c =================================================================== --- linux-3.5-rc1.orig/drivers/regulator/tps65023-regulator.c +++ linux-3.5-rc1/drivers/regulator/tps65023-regulator.c @@ -71,7 +71,7 @@ /* LDO_CTRL bitfields */ #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4) -#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4)) +#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4)) /* Number of step-down converters available */ #define TPS65023_NUM_DCDC 3 Index: linux-3.5-rc1/drivers/regulator/tps6524x-regulator.c =================================================================== --- linux-3.5-rc1.orig/drivers/regulator/tps6524x-regulator.c +++ linux-3.5-rc1/drivers/regulator/tps6524x-regulator.c @@ -482,7 +482,7 @@ static int get_voltage_sel(struct regula info = &supply_info[rdev_get_id(rdev)]; if (info->flags & FIXED_VOLTAGE) - return info->fixed_voltage; + return 0; ret = read_field(hw, &info->voltage); if (ret < 0) Index: linux-3.5-rc1/drivers/scsi/sd.c =================================================================== --- linux-3.5-rc1.orig/drivers/scsi/sd.c +++ linux-3.5-rc1/drivers/scsi/sd.c @@ -1899,6 +1899,8 @@ static int sd_try_rc16_first(struct scsi { if (sdp->host->max_cmd_len < 16) return 0; + if (sdp->try_rc_10_first) + return 0; if (sdp->scsi_level > SCSI_SPC_2) return 1; if (scsi_device_protection(sdp)) Index: linux-3.5-rc1/drivers/staging/media/lirc/lirc_serial.c =================================================================== --- linux-3.5-rc1.orig/drivers/staging/media/lirc/lirc_serial.c +++ linux-3.5-rc1/drivers/staging/media/lirc/lirc_serial.c @@ -129,6 +129,7 @@ static void send_space_homebrew(long len static struct lirc_serial hardware[] = { [LIRC_HOMEBREW] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock), .signal_pin = UART_MSR_DCD, .signal_pin_change = UART_MSR_DDCD, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), @@ -145,6 +146,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IRDEO] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = UART_MCR_OUT2, @@ -156,6 +158,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IRDEO_REMOTE] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), @@ -167,6 +170,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_ANIMAX] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock), .signal_pin = UART_MSR_DCD, .signal_pin_change = UART_MSR_DDCD, .on = 0, @@ -177,6 +181,7 @@ static struct lirc_serial hardware[] = { }, [LIRC_IGOR] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock), .signal_pin = UART_MSR_DSR, .signal_pin_change = UART_MSR_DDSR, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), @@ -201,6 +206,7 @@ static struct lirc_serial hardware[] = { * See also http://www.nslu2-linux.org for this device */ [LIRC_NSLU2] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock), .signal_pin = UART_MSR_CTS, .signal_pin_change = UART_MSR_DCTS, .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), Index: linux-3.5-rc1/drivers/usb/Makefile =================================================================== --- linux-3.5-rc1.orig/drivers/usb/Makefile +++ linux-3.5-rc1/drivers/usb/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB) += phy/ +obj-$(CONFIG_USB_COMMON) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ Index: linux-3.5-rc1/drivers/usb/dwc3/gadget.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/dwc3/gadget.c +++ linux-3.5-rc1/drivers/usb/dwc3/gadget.c @@ -1091,7 +1091,7 @@ static int dwc3_gadget_ep_dequeue(struct if (r == req) { /* wait until it is processed */ dwc3_stop_active_transfer(dwc, dep->number); - goto out0; + goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", request, ep->name); @@ -1099,6 +1099,7 @@ static int dwc3_gadget_ep_dequeue(struct goto out0; } +out1: /* giveback the request */ dwc3_gadget_giveback(dep, req, -ECONNRESET); Index: linux-3.5-rc1/drivers/usb/gadget/fsl_qe_udc.h =================================================================== --- linux-3.5-rc1.orig/drivers/usb/gadget/fsl_qe_udc.h +++ linux-3.5-rc1/drivers/usb/gadget/fsl_qe_udc.h @@ -153,10 +153,10 @@ struct usb_ep_para{ #define USB_BUSMODE_DTB 0x02 /* Endpoint basic handle */ -#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF) +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) #define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ - USB_DIR_IN) : ((EP)->desc->bEndpointAddress \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ & USB_DIR_IN) == USB_DIR_IN) /* ep0 transfer state */ Index: linux-3.5-rc1/drivers/usb/gadget/lpc32xx_udc.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/gadget/lpc32xx_udc.c +++ linux-3.5-rc1/drivers/usb/gadget/lpc32xx_udc.c @@ -61,6 +61,7 @@ #include #include #ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include #include #endif Index: linux-3.5-rc1/drivers/usb/musb/musb_host.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/musb/musb_host.c +++ linux-3.5-rc1/drivers/usb/musb/musb_host.c @@ -375,11 +375,21 @@ static void musb_advance_schedule(struct */ if (list_empty(&qh->hep->urb_list)) { struct list_head *head; + struct dma_controller *dma = musb->dma_controller; - if (is_in) + if (is_in) { ep->rx_reinit = 1; - else + if (ep->rx_channel) { + dma->channel_release(ep->rx_channel); + ep->rx_channel = NULL; + } + } else { ep->tx_reinit = 1; + if (ep->tx_channel) { + dma->channel_release(ep->tx_channel); + ep->tx_channel = NULL; + } + } /* Clobber old pointers to this qh */ musb_ep_set_qh(ep, is_in, NULL); Index: linux-3.5-rc1/drivers/usb/otg/twl6030-usb.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/otg/twl6030-usb.c +++ linux-3.5-rc1/drivers/usb/otg/twl6030-usb.c @@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(in regulator_enable(twl->usb3v3); twl->asleep = 1; - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x10); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = USB_EVENT_ID; otg->default_a = true; twl->phy.state = OTG_STATE_A_IDLE; @@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(in atomic_notifier_call_chain(&twl->phy.notifier, status, otg->gadget); } else { - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, - 0x10); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); } - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); + twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); return IRQ_HANDLED; } @@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb { struct twl6030_usb *twl = phy_to_twl(x); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); Index: linux-3.5-rc1/drivers/usb/phy/Kconfig =================================================================== --- linux-3.5-rc1.orig/drivers/usb/phy/Kconfig +++ linux-3.5-rc1/drivers/usb/phy/Kconfig @@ -2,11 +2,11 @@ # Physical Layer USB driver configuration # comment "USB Physical Layer drivers" - depends on USB + depends on USB || USB_GADGET config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" - depends on USB + depends on USB || USB_GADGET depends on I2C help Say Y here to add support for the NXP ISP1301 USB transceiver driver. Index: linux-3.5-rc1/drivers/usb/serial/cp210x.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/serial/cp210x.c +++ linux-3.5-rc1/drivers/usb/serial/cp210x.c @@ -93,6 +93,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -134,7 +135,13 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ + { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ + { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */ + { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ + { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ + { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ @@ -146,7 +153,11 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ + { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ + { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; Index: linux-3.5-rc1/drivers/usb/serial/option.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/serial/option.c +++ linux-3.5-rc1/drivers/usb/serial/option.c @@ -236,6 +236,7 @@ static void option_instat_callback(struc #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 +#define NOVATELWIRELESS_PRODUCT_MC551 0xB001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -497,6 +498,10 @@ static void option_instat_callback(struc /* MediaTek products */ #define MEDIATEK_VENDOR_ID 0x0e8d +/* Cellient products */ +#define CELLIENT_VENDOR_ID 0x2692 +#define CELLIENT_PRODUCT_MEN200 0x9005 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -734,6 +739,8 @@ static const struct usb_device_id option { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, + /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -1233,6 +1240,7 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */ + { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); Index: linux-3.5-rc1/drivers/usb/storage/scsiglue.c =================================================================== --- linux-3.5-rc1.orig/drivers/usb/storage/scsiglue.c +++ linux-3.5-rc1/drivers/usb/storage/scsiglue.c @@ -202,6 +202,12 @@ static int slave_configure(struct scsi_d if (us->fflags & US_FL_NO_READ_CAPACITY_16) sdev->no_read_capacity_16 = 1; + /* + * Many devices do not respond properly to READ_CAPACITY_16. + * Tell the SCSI layer to try READ_CAPACITY_10 first. + */ + sdev->try_rc_10_first = 1; + /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) us->fflags |= US_FL_SANE_SENSE; Index: linux-3.5-rc1/drivers/usb/storage/unusual_devs.h =================================================================== --- linux-3.5-rc1.orig/drivers/usb/storage/unusual_devs.h +++ linux-3.5-rc1/drivers/usb/storage/unusual_devs.h @@ -1107,13 +1107,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9 USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -/* Feiya QDI U2 DISK, reported by Hans de Goede */ -UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff, - "Feiya", - "QDI U2 DISK", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_NO_READ_CAPACITY_16 ), - /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", Index: linux-3.5-rc1/drivers/vhost/vhost.c =================================================================== --- linux-3.5-rc1.orig/drivers/vhost/vhost.c +++ linux-3.5-rc1/drivers/vhost/vhost.c @@ -191,7 +191,9 @@ static int vhost_worker(void *data) struct vhost_dev *dev = data; struct vhost_work *work = NULL; unsigned uninitialized_var(seq); + mm_segment_t oldfs = get_fs(); + set_fs(USER_DS); use_mm(dev->mm); for (;;) { @@ -229,6 +231,7 @@ static int vhost_worker(void *data) } unuse_mm(dev->mm); + set_fs(oldfs); return 0; } Index: linux-3.5-rc1/drivers/watchdog/hpwdt.c =================================================================== --- linux-3.5-rc1.orig/drivers/watchdog/hpwdt.c +++ linux-3.5-rc1/drivers/watchdog/hpwdt.c @@ -146,7 +146,7 @@ struct cmn_registers { } __attribute__((packed)); static unsigned int hpwdt_nmi_decoding; -static unsigned int allow_kdump; +static unsigned int allow_kdump = 1; static unsigned int is_icru; static DEFINE_SPINLOCK(rom_lock); static void *cru_rom_addr; @@ -756,6 +756,8 @@ error: static void hpwdt_exit_nmi_decoding(void) { unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); + unregister_nmi_handler(NMI_SERR, "hpwdt"); + unregister_nmi_handler(NMI_IO_CHECK, "hpwdt"); if (cru_rom_addr) iounmap(cru_rom_addr); } Index: linux-3.5-rc1/drivers/watchdog/iTCO_wdt.c =================================================================== --- linux-3.5-rc1.orig/drivers/watchdog/iTCO_wdt.c +++ linux-3.5-rc1/drivers/watchdog/iTCO_wdt.c @@ -699,3 +699,4 @@ MODULE_DESCRIPTION("Intel TCO WatchDog T MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:" DRV_NAME); Index: linux-3.5-rc1/drivers/watchdog/watchdog_dev.c =================================================================== --- linux-3.5-rc1.orig/drivers/watchdog/watchdog_dev.c +++ linux-3.5-rc1/drivers/watchdog/watchdog_dev.c @@ -349,7 +349,7 @@ static long watchdog_ioctl(struct file * sizeof(struct watchdog_info)) ? -EFAULT : 0; case WDIOC_GETSTATUS: err = watchdog_get_status(wdd, &val); - if (err) + if (err == -ENODEV) return err; return put_user(val, p); case WDIOC_GETBOOTSTATUS: Index: linux-3.5-rc1/fs/ubifs/debug.c =================================================================== --- linux-3.5-rc1.orig/fs/ubifs/debug.c +++ linux-3.5-rc1/fs/ubifs/debug.c @@ -2918,7 +2918,7 @@ int dbg_debugfs_init_fs(struct ubifs_inf struct dentry *dent; struct ubifs_debug_info *d = c->dbg; - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME, @@ -3013,7 +3013,7 @@ out: */ void dbg_debugfs_exit_fs(struct ubifs_info *c) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove_recursive(c->dbg->dfs_dir); } @@ -3099,7 +3099,7 @@ int dbg_debugfs_init(void) const char *fname; struct dentry *dent; - if (!IS_ENABLED(DEBUG_FS)) + if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; fname = "ubifs"; @@ -3166,7 +3166,7 @@ out: */ void dbg_debugfs_exit(void) { - if (IS_ENABLED(DEBUG_FS)) + if (IS_ENABLED(CONFIG_DEBUG_FS)) debugfs_remove_recursive(dfs_rootdir); } Index: linux-3.5-rc1/fs/ubifs/find.c =================================================================== --- linux-3.5-rc1.orig/fs/ubifs/find.c +++ linux-3.5-rc1/fs/ubifs/find.c @@ -939,8 +939,8 @@ static int find_dirtiest_idx_leb(struct } dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty, lp->free, lp->flags); - ubifs_assert(lp->flags | LPROPS_TAKEN); - ubifs_assert(lp->flags | LPROPS_INDEX); + ubifs_assert(lp->flags & LPROPS_TAKEN); + ubifs_assert(lp->flags & LPROPS_INDEX); return lnum; } Index: linux-3.5-rc1/fs/udf/super.c =================================================================== --- linux-3.5-rc1.orig/fs/udf/super.c +++ linux-3.5-rc1/fs/udf/super.c @@ -56,6 +56,7 @@ #include #include #include +#include #include #include "udf_sb.h" @@ -1215,16 +1216,65 @@ out_bh: return ret; } +static int udf_load_sparable_map(struct super_block *sb, + struct udf_part_map *map, + struct sparablePartitionMap *spm) +{ + uint32_t loc; + uint16_t ident; + struct sparingTable *st; + struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing; + int i; + struct buffer_head *bh; + + map->s_partition_type = UDF_SPARABLE_MAP15; + sdata->s_packet_len = le16_to_cpu(spm->packetLength); + if (!is_power_of_2(sdata->s_packet_len)) { + udf_err(sb, "error loading logical volume descriptor: " + "Invalid packet length %u\n", + (unsigned)sdata->s_packet_len); + return -EIO; + } + if (spm->numSparingTables > 4) { + udf_err(sb, "error loading logical volume descriptor: " + "Too many sparing tables (%d)\n", + (int)spm->numSparingTables); + return -EIO; + } + + for (i = 0; i < spm->numSparingTables; i++) { + loc = le32_to_cpu(spm->locSparingTable[i]); + bh = udf_read_tagged(sb, loc, loc, &ident); + if (!bh) + continue; + + st = (struct sparingTable *)bh->b_data; + if (ident != 0 || + strncmp(st->sparingIdent.ident, UDF_ID_SPARING, + strlen(UDF_ID_SPARING)) || + sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > + sb->s_blocksize) { + brelse(bh); + continue; + } + + sdata->s_spar_map[i] = bh; + } + map->s_partition_func = udf_get_pblock_spar15; + return 0; +} + static int udf_load_logicalvol(struct super_block *sb, sector_t block, struct kernel_lb_addr *fileset) { struct logicalVolDesc *lvd; - int i, j, offset; + int i, offset; uint8_t type; struct udf_sb_info *sbi = UDF_SB(sb); struct genericPartitionMap *gpm; uint16_t ident; struct buffer_head *bh; + unsigned int table_len; int ret = 0; bh = udf_read_tagged(sb, block, block, &ident); @@ -1232,15 +1282,20 @@ static int udf_load_logicalvol(struct su return 1; BUG_ON(ident != TAG_IDENT_LVD); lvd = (struct logicalVolDesc *)bh->b_data; - - i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps)); - if (i != 0) { - ret = i; + table_len = le32_to_cpu(lvd->mapTableLength); + if (sizeof(*lvd) + table_len > sb->s_blocksize) { + udf_err(sb, "error loading logical volume descriptor: " + "Partition table too long (%u > %lu)\n", table_len, + sb->s_blocksize - sizeof(*lvd)); goto out_bh; } + ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps)); + if (ret) + goto out_bh; + for (i = 0, offset = 0; - i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength); + i < sbi->s_partitions && offset < table_len; i++, offset += gpm->partitionMapLength) { struct udf_part_map *map = &sbi->s_partmaps[i]; gpm = (struct genericPartitionMap *) @@ -1275,38 +1330,9 @@ static int udf_load_logicalvol(struct su } else if (!strncmp(upm2->partIdent.ident, UDF_ID_SPARABLE, strlen(UDF_ID_SPARABLE))) { - uint32_t loc; - struct sparingTable *st; - struct sparablePartitionMap *spm = - (struct sparablePartitionMap *)gpm; - - map->s_partition_type = UDF_SPARABLE_MAP15; - map->s_type_specific.s_sparing.s_packet_len = - le16_to_cpu(spm->packetLength); - for (j = 0; j < spm->numSparingTables; j++) { - struct buffer_head *bh2; - - loc = le32_to_cpu( - spm->locSparingTable[j]); - bh2 = udf_read_tagged(sb, loc, loc, - &ident); - map->s_type_specific.s_sparing. - s_spar_map[j] = bh2; - - if (bh2 == NULL) - continue; - - st = (struct sparingTable *)bh2->b_data; - if (ident != 0 || strncmp( - st->sparingIdent.ident, - UDF_ID_SPARING, - strlen(UDF_ID_SPARING))) { - brelse(bh2); - map->s_type_specific.s_sparing. - s_spar_map[j] = NULL; - } - } - map->s_partition_func = udf_get_pblock_spar15; + if (udf_load_sparable_map(sb, map, + (struct sparablePartitionMap *)gpm) < 0) + goto out_bh; } else if (!strncmp(upm2->partIdent.ident, UDF_ID_METADATA, strlen(UDF_ID_METADATA))) { Index: linux-3.5-rc1/include/asm-generic/bug.h =================================================================== --- linux-3.5-rc1.orig/include/asm-generic/bug.h +++ linux-3.5-rc1/include/asm-generic/bug.h @@ -3,10 +3,18 @@ #include +#ifdef CONFIG_GENERIC_BUG +#define BUGFLAG_WARNING (1 << 0) +#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8)) +#define BUG_GET_TAINT(bug) ((bug)->flags >> 8) +#endif + +#ifndef __ASSEMBLY__ +#include + #ifdef CONFIG_BUG #ifdef CONFIG_GENERIC_BUG -#ifndef __ASSEMBLY__ struct bug_entry { #ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS unsigned long bug_addr; @@ -23,17 +31,8 @@ struct bug_entry { #endif unsigned short flags; }; -#endif /* __ASSEMBLY__ */ - -#define BUGFLAG_WARNING (1 << 0) -#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8)) -#define BUG_GET_TAINT(bug) ((bug)->flags >> 8) - #endif /* CONFIG_GENERIC_BUG */ -#ifndef __ASSEMBLY__ -#include - /* * Don't use BUG() or BUG_ON() unless there's really no way out; one * example might be detecting data structure corruption in the middle Index: linux-3.5-rc1/include/linux/irq.h =================================================================== --- linux-3.5-rc1.orig/include/linux/irq.h +++ linux-3.5-rc1/include/linux/irq.h @@ -301,8 +301,6 @@ static inline irq_hw_number_t irqd_to_hw * @irq_pm_shutdown: function called from core code on shutdown once per chip * @irq_print_chip: optional to print special chip info in show_interrupts * @flags: chip specific flags - * - * @release: release function solely used by UML */ struct irq_chip { const char *name; Index: linux-3.5-rc1/include/linux/skbuff.h =================================================================== --- linux-3.5-rc1.orig/include/linux/skbuff.h +++ linux-3.5-rc1/include/linux/skbuff.h @@ -225,14 +225,11 @@ enum { /* device driver is going to provide hardware time stamp */ SKBTX_IN_PROGRESS = 1 << 2, - /* ensure the originating sk reference is available on driver level */ - SKBTX_DRV_NEEDS_SK_REF = 1 << 3, - /* device driver supports TX zero-copy buffers */ - SKBTX_DEV_ZEROCOPY = 1 << 4, + SKBTX_DEV_ZEROCOPY = 1 << 3, /* generate wifi status information (where possible) */ - SKBTX_WIFI_STATUS = 1 << 5, + SKBTX_WIFI_STATUS = 1 << 4, }; /* Index: linux-3.5-rc1/include/linux/videodev2.h =================================================================== --- linux-3.5-rc1.orig/include/linux/videodev2.h +++ linux-3.5-rc1/include/linux/videodev2.h @@ -2640,9 +2640,9 @@ struct v4l2_create_buffers { /* Experimental, these three ioctls may change over the next couple of kernel versions. */ -#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings) -#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings) -#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap) +#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) +#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) +#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ Index: linux-3.5-rc1/include/net/bluetooth/hci.h =================================================================== --- linux-3.5-rc1.orig/include/net/bluetooth/hci.h +++ linux-3.5-rc1/include/net/bluetooth/hci.h @@ -1144,6 +1144,12 @@ struct extended_inquiry_info { __u8 data[240]; } __packed; +#define HCI_EV_KEY_REFRESH_COMPLETE 0x30 +struct hci_ev_key_refresh_complete { + __u8 status; + __le16 handle; +} __packed; + #define HCI_EV_IO_CAPA_REQUEST 0x31 struct hci_ev_io_capa_request { bdaddr_t bdaddr; Index: linux-3.5-rc1/include/net/mac80211.h =================================================================== --- linux-3.5-rc1.orig/include/net/mac80211.h +++ linux-3.5-rc1/include/net/mac80211.h @@ -1940,6 +1940,11 @@ enum ieee80211_rate_control_changed { * to also unregister the device. If it returns 1, then mac80211 * will also go through the regular complete restart on resume. * + * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is + * modified. The reason is that device_set_wakeup_enable() is + * supposed to be called when the configuration changes, not only + * in suspend(). + * * @add_interface: Called when a netdevice attached to the hardware is * enabled. Because it is not called for monitor mode devices, @start * and @stop must be implemented. @@ -2966,6 +2971,7 @@ __le16 ieee80211_ctstoself_duration(stru * ieee80211_generic_frame_duration - Calculate the duration field for a frame * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @band: the band to calculate the frame duration on * @frame_len: the length of the frame. * @rate: the rate at which the frame is going to be transmitted. * Index: linux-3.5-rc1/include/net/phonet/gprs.h =================================================================== --- linux-3.5-rc1.orig/include/net/phonet/gprs.h +++ linux-3.5-rc1/include/net/phonet/gprs.h @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/include/scsi/scsi_device.h =================================================================== --- linux-3.5-rc1.orig/include/scsi/scsi_device.h +++ linux-3.5-rc1/include/scsi/scsi_device.h @@ -151,6 +151,7 @@ struct scsi_device { SD_LAST_BUGGY_SECTORS */ unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */ unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */ + unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */ unsigned is_visible:1; /* is the device visible in sysfs */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ Index: linux-3.5-rc1/include/sound/tea575x-tuner.h =================================================================== --- linux-3.5-rc1.orig/include/sound/tea575x-tuner.h +++ linux-3.5-rc1/include/sound/tea575x-tuner.h @@ -44,6 +44,7 @@ struct snd_tea575x_ops { struct snd_tea575x { struct v4l2_device *v4l2_dev; + struct v4l2_file_operations fops; struct video_device vd; /* video device */ int radio_nr; /* radio_nr */ bool tea5759; /* 5759 chip is present */ @@ -62,7 +63,7 @@ struct snd_tea575x { int (*ext_init)(struct snd_tea575x *tea); }; -int snd_tea575x_init(struct snd_tea575x *tea); +int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner); void snd_tea575x_exit(struct snd_tea575x *tea); #endif /* __SOUND_TEA575X_TUNER_H */ Index: linux-3.5-rc1/kernel/printk.c =================================================================== --- linux-3.5-rc1.orig/kernel/printk.c +++ linux-3.5-rc1/kernel/printk.c @@ -193,12 +193,19 @@ static int console_may_schedule; * separated by ',', and find the message after the ';' character. */ +enum log_flags { + LOG_DEFAULT = 0, + LOG_NOCONS = 1, /* already flushed, do not print to console */ +}; + struct log { u64 ts_nsec; /* timestamp in nanoseconds */ u16 len; /* length of entire record */ u16 text_len; /* length of text buffer */ u16 dict_len; /* length of dictionary buffer */ - u16 level; /* syslog level + facility */ + u8 facility; /* syslog facility */ + u8 flags:5; /* internal record flags */ + u8 level:3; /* syslog level */ }; /* @@ -286,6 +293,7 @@ static u32 log_next(u32 idx) /* insert record into the buffer, discard old ones, update heads */ static void log_store(int facility, int level, + enum log_flags flags, u64 ts_nsec, const char *dict, u16 dict_len, const char *text, u16 text_len) { @@ -329,8 +337,13 @@ static void log_store(int facility, int msg->text_len = text_len; memcpy(log_dict(msg), dict, dict_len); msg->dict_len = dict_len; - msg->level = (facility << 3) | (level & 7); - msg->ts_nsec = local_clock(); + msg->facility = facility; + msg->level = level & 7; + msg->flags = flags & 0x1f; + if (ts_nsec > 0) + msg->ts_nsec = ts_nsec; + else + msg->ts_nsec = local_clock(); memset(log_dict(msg) + dict_len, 0, pad_len); msg->len = sizeof(struct log) + text_len + dict_len + pad_len; @@ -446,7 +459,7 @@ static ssize_t devkmsg_read(struct file ts_usec = msg->ts_nsec; do_div(ts_usec, 1000); len = sprintf(user->buf, "%u,%llu,%llu;", - msg->level, user->seq, ts_usec); + (msg->facility << 3) | msg->level, user->seq, ts_usec); /* escape non-printable characters */ for (i = 0; i < msg->text_len; i++) { @@ -787,6 +800,21 @@ static bool printk_time; #endif module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); +static size_t print_time(u64 ts, char *buf) +{ + unsigned long rem_nsec; + + if (!printk_time) + return 0; + + if (!buf) + return 15; + + rem_nsec = do_div(ts, 1000000000); + return sprintf(buf, "[%5lu.%06lu] ", + (unsigned long)ts, rem_nsec / 1000); +} + static size_t print_prefix(const struct log *msg, bool syslog, char *buf) { size_t len = 0; @@ -803,18 +831,7 @@ static size_t print_prefix(const struct } } - if (printk_time) { - if (buf) { - unsigned long long ts = msg->ts_nsec; - unsigned long rem_nsec = do_div(ts, 1000000000); - - len += sprintf(buf + len, "[%5lu.%06lu] ", - (unsigned long) ts, rem_nsec / 1000); - } else { - len += 15; - } - } - + len += print_time(msg->ts_nsec, buf ? buf + len : NULL); return len; } @@ -862,28 +879,49 @@ static int syslog_print(char __user *buf { char *text; struct log *msg; - int len; + int len = 0; text = kmalloc(LOG_LINE_MAX, GFP_KERNEL); if (!text) return -ENOMEM; - raw_spin_lock_irq(&logbuf_lock); - if (syslog_seq < log_first_seq) { - /* messages are gone, move to first one */ - syslog_seq = log_first_seq; - syslog_idx = log_first_idx; - } - msg = log_from_idx(syslog_idx); - len = msg_print_text(msg, true, text, LOG_LINE_MAX); - syslog_idx = log_next(syslog_idx); - syslog_seq++; - raw_spin_unlock_irq(&logbuf_lock); + while (size > 0) { + size_t n; - if (len > size) - len = -EINVAL; - else if (len > 0 && copy_to_user(buf, text, len)) - len = -EFAULT; + raw_spin_lock_irq(&logbuf_lock); + if (syslog_seq < log_first_seq) { + /* messages are gone, move to first one */ + syslog_seq = log_first_seq; + syslog_idx = log_first_idx; + } + if (syslog_seq == log_next_seq) { + raw_spin_unlock_irq(&logbuf_lock); + break; + } + msg = log_from_idx(syslog_idx); + n = msg_print_text(msg, true, text, LOG_LINE_MAX); + if (n <= size) { + syslog_idx = log_next(syslog_idx); + syslog_seq++; + } else + n = 0; + raw_spin_unlock_irq(&logbuf_lock); + + if (!n) + break; + + len += n; + size -= n; + buf += n; + n = copy_to_user(buf - n, text, n); + + if (n) { + len -= n; + if (!len) + len = -EFAULT; + break; + } + } kfree(text); return len; @@ -1040,6 +1078,7 @@ int do_syslog(int type, char __user *buf /* Clear ring buffer */ case SYSLOG_ACTION_CLEAR: syslog_print_all(NULL, 0, true); + break; /* Disable logging to console */ case SYSLOG_ACTION_CONSOLE_OFF: if (saved_console_loglevel == -1) @@ -1272,15 +1311,92 @@ static inline void printk_delay(void) } } +/* + * Continuation lines are buffered, and not committed to the record buffer + * until the line is complete, or a race forces it. The line fragments + * though, are printed immediately to the consoles to ensure everything has + * reached the console in case of a kernel crash. + */ +static struct cont { + char buf[LOG_LINE_MAX]; + size_t len; /* length == 0 means unused buffer */ + size_t cons; /* bytes written to console */ + struct task_struct *owner; /* task of first print*/ + u64 ts_nsec; /* time of first print */ + u8 level; /* log level of first message */ + u8 facility; /* log level of first message */ + bool flushed:1; /* buffer sealed and committed */ +} cont; + +static void cont_flush(void) +{ + if (cont.flushed) + return; + if (cont.len == 0) + return; + + log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec, + NULL, 0, cont.buf, cont.len); + + cont.flushed = true; +} + +static bool cont_add(int facility, int level, const char *text, size_t len) +{ + if (cont.len && cont.flushed) + return false; + + if (cont.len + len > sizeof(cont.buf)) { + cont_flush(); + return false; + } + + if (!cont.len) { + cont.facility = facility; + cont.level = level; + cont.owner = current; + cont.ts_nsec = local_clock(); + cont.cons = 0; + cont.flushed = false; + } + + memcpy(cont.buf + cont.len, text, len); + cont.len += len; + return true; +} + +static size_t cont_print_text(char *text, size_t size) +{ + size_t textlen = 0; + size_t len; + + if (cont.cons == 0) { + textlen += print_time(cont.ts_nsec, text); + size -= textlen; + } + + len = cont.len - cont.cons; + if (len > 0) { + if (len+1 > size) + len = size-1; + memcpy(text + textlen, cont.buf + cont.cons, len); + textlen += len; + cont.cons = cont.len; + } + + if (cont.flushed) { + text[textlen++] = '\n'; + /* got everything, release buffer */ + cont.len = 0; + } + return textlen; +} + asmlinkage int vprintk_emit(int facility, int level, const char *dict, size_t dictlen, const char *fmt, va_list args) { static int recursion_bug; - static char cont_buf[LOG_LINE_MAX]; - static size_t cont_len; - static int cont_level; - static struct task_struct *cont_task; static char textbuf[LOG_LINE_MAX]; char *text = textbuf; size_t text_len; @@ -1326,7 +1442,8 @@ asmlinkage int vprintk_emit(int facility recursion_bug = 0; printed_len += strlen(recursion_msg); /* emit KERN_CRIT message */ - log_store(0, 2, NULL, 0, recursion_msg, printed_len); + log_store(0, 2, LOG_DEFAULT, 0, + NULL, 0, recursion_msg, printed_len); } /* @@ -1364,55 +1481,37 @@ asmlinkage int vprintk_emit(int facility } if (!newline) { - if (cont_len && (prefix || cont_task != current)) { - /* - * Flush earlier buffer, which is either from a - * different thread, or when we got a new prefix. - */ - log_store(facility, cont_level, NULL, 0, cont_buf, cont_len); - cont_len = 0; - } - - if (!cont_len) { - cont_level = level; - cont_task = current; - } + /* + * Flush the conflicting buffer. An earlier newline was missing, + * or another task also prints continuation lines. + */ + if (cont.len && (prefix || cont.owner != current)) + cont_flush(); - /* buffer or append to earlier buffer from the same thread */ - if (cont_len + text_len > sizeof(cont_buf)) - text_len = sizeof(cont_buf) - cont_len; - memcpy(cont_buf + cont_len, text, text_len); - cont_len += text_len; + /* buffer line if possible, otherwise store it right away */ + if (!cont_add(facility, level, text, text_len)) + log_store(facility, level, LOG_DEFAULT, 0, + dict, dictlen, text, text_len); } else { - if (cont_len && cont_task == current) { - if (prefix) { - /* - * New prefix from the same thread; flush. We - * either got no earlier newline, or we race - * with an interrupt. - */ - log_store(facility, cont_level, - NULL, 0, cont_buf, cont_len); - cont_len = 0; - } + bool stored = false; - /* append to the earlier buffer and flush */ - if (cont_len + text_len > sizeof(cont_buf)) - text_len = sizeof(cont_buf) - cont_len; - memcpy(cont_buf + cont_len, text, text_len); - cont_len += text_len; - log_store(facility, cont_level, - NULL, 0, cont_buf, cont_len); - cont_len = 0; - cont_task = NULL; - printed_len = cont_len; - } else { - /* ordinary single and terminated line */ - log_store(facility, level, - dict, dictlen, text, text_len); - printed_len = text_len; + /* + * If an earlier newline was missing and it was the same task, + * either merge it with the current buffer and flush, or if + * there was a race with interrupts (prefix == true) then just + * flush it out and store this line separately. + */ + if (cont.len && cont.owner == current) { + if (!prefix) + stored = cont_add(facility, level, text, text_len); + cont_flush(); } + + if (!stored) + log_store(facility, level, LOG_DEFAULT, 0, + dict, dictlen, text, text_len); } + printed_len += text_len; /* * Try to acquire and then immediately release the console semaphore. @@ -1499,11 +1598,18 @@ EXPORT_SYMBOL(printk); #else #define LOG_LINE_MAX 0 +static struct cont { + size_t len; + size_t cons; + u8 level; + bool flushed:1; +} cont; static struct log *log_from_idx(u32 idx) { return NULL; } static u32 log_next(u32 idx) { return 0; } static void call_console_drivers(int level, const char *text, size_t len) {} static size_t msg_print_text(const struct log *msg, bool syslog, char *buf, size_t size) { return 0; } +static size_t cont_print_text(char *text, size_t size) { return 0; } #endif /* CONFIG_PRINTK */ @@ -1795,6 +1901,7 @@ static u32 console_idx; */ void console_unlock(void) { + static char text[LOG_LINE_MAX]; static u64 seen_seq; unsigned long flags; bool wake_klogd = false; @@ -1807,10 +1914,23 @@ void console_unlock(void) console_may_schedule = 0; + /* flush buffered message fragment immediately to console */ + raw_spin_lock_irqsave(&logbuf_lock, flags); + if (cont.len && (cont.cons < cont.len || cont.flushed)) { + size_t len; + + len = cont_print_text(text, sizeof(text)); + raw_spin_unlock(&logbuf_lock); + stop_critical_timings(); + call_console_drivers(cont.level, text, len); + start_critical_timings(); + local_irq_restore(flags); + } else + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + again: for (;;) { struct log *msg; - static char text[LOG_LINE_MAX]; size_t len; int level; @@ -1825,13 +1945,22 @@ again: console_seq = log_first_seq; console_idx = log_first_idx; } - +skip: if (console_seq == log_next_seq) break; msg = log_from_idx(console_idx); - level = msg->level & 7; + if (msg->flags & LOG_NOCONS) { + /* + * Skip record we have buffered and already printed + * directly to the console when we received it. + */ + console_idx = log_next(console_idx); + console_seq++; + goto skip; + } + level = msg->level; len = msg_print_text(msg, false, text, sizeof(text)); console_idx = log_next(console_idx); @@ -2409,7 +2538,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line); * kmsg_dump_get_buffer - copy kmsg log lines * @dumper: registered kmsg dumper * @syslog: include the "<4>" prefixes - * @line: buffer to copy the line to + * @buf: buffer to copy the line to * @size: maximum size of the buffer * @len: length of line placed into buffer * Index: linux-3.5-rc1/kernel/rcutree.c =================================================================== --- linux-3.5-rc1.orig/kernel/rcutree.c +++ linux-3.5-rc1/kernel/rcutree.c @@ -1530,7 +1530,7 @@ static void rcu_do_batch(struct rcu_stat { unsigned long flags; struct rcu_head *next, *list, **tail; - int bl, count, count_lazy; + int bl, count, count_lazy, i; /* If no callbacks are ready, just return.*/ if (!cpu_has_callbacks_ready_to_invoke(rdp)) { @@ -1553,9 +1553,9 @@ static void rcu_do_batch(struct rcu_stat rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL]; *rdp->nxttail[RCU_DONE_TAIL] = NULL; tail = rdp->nxttail[RCU_DONE_TAIL]; - for (count = RCU_NEXT_SIZE - 1; count >= 0; count--) - if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL]) - rdp->nxttail[count] = &rdp->nxtlist; + for (i = RCU_NEXT_SIZE - 1; i >= 0; i--) + if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL]) + rdp->nxttail[i] = &rdp->nxtlist; local_irq_restore(flags); /* Invoke callbacks. */ @@ -1583,9 +1583,9 @@ static void rcu_do_batch(struct rcu_stat if (list != NULL) { *tail = rdp->nxtlist; rdp->nxtlist = list; - for (count = 0; count < RCU_NEXT_SIZE; count++) - if (&rdp->nxtlist == rdp->nxttail[count]) - rdp->nxttail[count] = tail; + for (i = 0; i < RCU_NEXT_SIZE; i++) + if (&rdp->nxtlist == rdp->nxttail[i]) + rdp->nxttail[i] = tail; else break; } Index: linux-3.5-rc1/net/9p/protocol.c =================================================================== --- linux-3.5-rc1.orig/net/9p/protocol.c +++ linux-3.5-rc1/net/9p/protocol.c @@ -368,7 +368,7 @@ p9pdu_vwritef(struct p9_fcall *pdu, int const char *sptr = va_arg(ap, const char *); uint16_t len = 0; if (sptr) - len = min_t(uint16_t, strlen(sptr), + len = min_t(size_t, strlen(sptr), USHRT_MAX); errcode = p9pdu_writef(pdu, proto_version, Index: linux-3.5-rc1/net/batman-adv/routing.c =================================================================== --- linux-3.5-rc1.orig/net/batman-adv/routing.c +++ linux-3.5-rc1/net/batman-adv/routing.c @@ -617,6 +617,8 @@ int recv_tt_query(struct sk_buff *skb, s * changes */ if (skb_linearize(skb) < 0) goto out; + /* skb_linearize() possibly changed skb->data */ + tt_query = (struct tt_query_packet *)skb->data; tt_len = tt_query->tt_data * sizeof(struct tt_change); Index: linux-3.5-rc1/net/batman-adv/translation-table.c =================================================================== --- linux-3.5-rc1.orig/net/batman-adv/translation-table.c +++ linux-3.5-rc1/net/batman-adv/translation-table.c @@ -141,13 +141,14 @@ static void tt_orig_list_entry_free_rcu( struct tt_orig_list_entry *orig_entry; orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu); - atomic_dec(&orig_entry->orig_node->tt_size); orig_node_free_ref(orig_entry->orig_node); kfree(orig_entry); } static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry) { + /* to avoid race conditions, immediately decrease the tt counter */ + atomic_dec(&orig_entry->orig_node->tt_size); call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu); } @@ -910,7 +911,6 @@ void tt_global_del_orig(struct bat_priv } spin_unlock_bh(list_lock); } - atomic_set(&orig_node->tt_size, 0); orig_node->tt_initialised = false; } @@ -2031,10 +2031,10 @@ bool is_ap_isolated(struct bat_priv *bat { struct tt_local_entry *tt_local_entry = NULL; struct tt_global_entry *tt_global_entry = NULL; - bool ret = true; + bool ret = false; if (!atomic_read(&bat_priv->ap_isolation)) - return false; + goto out; tt_local_entry = tt_local_hash_find(bat_priv, dst); if (!tt_local_entry) @@ -2044,10 +2044,10 @@ bool is_ap_isolated(struct bat_priv *bat if (!tt_global_entry) goto out; - if (_is_ap_isolated(tt_local_entry, tt_global_entry)) + if (!_is_ap_isolated(tt_local_entry, tt_global_entry)) goto out; - ret = false; + ret = true; out: if (tt_global_entry) Index: linux-3.5-rc1/net/bluetooth/hci_event.c =================================================================== --- linux-3.5-rc1.orig/net/bluetooth/hci_event.c +++ linux-3.5-rc1/net/bluetooth/hci_event.c @@ -3043,6 +3043,50 @@ static inline void hci_extended_inquiry_ hci_dev_unlock(hdev); } +static void hci_key_refresh_complete_evt(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct hci_ev_key_refresh_complete *ev = (void *) skb->data; + struct hci_conn *conn; + + BT_DBG("%s status %u handle %u", hdev->name, ev->status, + __le16_to_cpu(ev->handle)); + + hci_dev_lock(hdev); + + conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); + if (!conn) + goto unlock; + + if (!ev->status) + conn->sec_level = conn->pending_sec_level; + + clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags); + + if (ev->status && conn->state == BT_CONNECTED) { + hci_acl_disconn(conn, HCI_ERROR_AUTH_FAILURE); + hci_conn_put(conn); + goto unlock; + } + + if (conn->state == BT_CONFIG) { + if (!ev->status) + conn->state = BT_CONNECTED; + + hci_proto_connect_cfm(conn, ev->status); + hci_conn_put(conn); + } else { + hci_auth_cfm(conn, ev->status); + + hci_conn_hold(conn); + conn->disc_timeout = HCI_DISCONN_TIMEOUT; + hci_conn_put(conn); + } + +unlock: + hci_dev_unlock(hdev); +} + static inline u8 hci_get_auth_req(struct hci_conn *conn) { /* If remote requests dedicated bonding follow that lead */ @@ -3559,6 +3603,10 @@ void hci_event_packet(struct hci_dev *hd hci_extended_inquiry_result_evt(hdev, skb); break; + case HCI_EV_KEY_REFRESH_COMPLETE: + hci_key_refresh_complete_evt(hdev, skb); + break; + case HCI_EV_IO_CAPA_REQUEST: hci_io_capa_request_evt(hdev, skb); break; Index: linux-3.5-rc1/net/bluetooth/hidp/Kconfig =================================================================== --- linux-3.5-rc1.orig/net/bluetooth/hidp/Kconfig +++ linux-3.5-rc1/net/bluetooth/hidp/Kconfig @@ -1,6 +1,6 @@ config BT_HIDP tristate "HIDP protocol support" - depends on BT && INPUT && HID_SUPPORT + depends on BT && INPUT select HID help HIDP (Human Interface Device Protocol) is a transport layer Index: linux-3.5-rc1/net/bluetooth/l2cap_core.c =================================================================== --- linux-3.5-rc1.orig/net/bluetooth/l2cap_core.c +++ linux-3.5-rc1/net/bluetooth/l2cap_core.c @@ -1295,7 +1295,12 @@ static void security_timeout(struct work struct l2cap_conn *conn = container_of(work, struct l2cap_conn, security_timer.work); - l2cap_conn_del(conn->hcon, ETIMEDOUT); + BT_DBG("conn %p", conn); + + if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) { + smp_chan_destroy(conn); + l2cap_conn_del(conn->hcon, ETIMEDOUT); + } } static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status) @@ -2910,12 +2915,14 @@ static void l2cap_conf_rfc_get(struct l2 while (len >= L2CAP_CONF_OPT_SIZE) { len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val); - switch (type) { - case L2CAP_CONF_RFC: - if (olen == sizeof(rfc)) - memcpy(&rfc, (void *)val, olen); - goto done; - } + if (type != L2CAP_CONF_RFC) + continue; + + if (olen != sizeof(rfc)) + break; + + memcpy(&rfc, (void *)val, olen); + goto done; } /* Use sane default values in case a misbehaving remote device Index: linux-3.5-rc1/net/bluetooth/mgmt.c =================================================================== --- linux-3.5-rc1.orig/net/bluetooth/mgmt.c +++ linux-3.5-rc1/net/bluetooth/mgmt.c @@ -1598,7 +1598,7 @@ static int disconnect(struct sock *sk, s else conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr); - if (!conn) { + if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) { err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, MGMT_STATUS_NOT_CONNECTED); goto failed; @@ -1873,6 +1873,22 @@ static void pairing_complete_cb(struct h pairing_complete(cmd, mgmt_status(status)); } +static void le_connect_complete_cb(struct hci_conn *conn, u8 status) +{ + struct pending_cmd *cmd; + + BT_DBG("status %u", status); + + if (!status) + return; + + cmd = find_pairing(conn); + if (!cmd) + BT_DBG("Unable to find a pending command"); + else + pairing_complete(cmd, mgmt_status(status)); +} + static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { @@ -1934,6 +1950,8 @@ static int pair_device(struct sock *sk, /* For LE, just connecting isn't a proof that the pairing finished */ if (cp->addr.type == BDADDR_BREDR) conn->connect_cfm_cb = pairing_complete_cb; + else + conn->connect_cfm_cb = le_connect_complete_cb; conn->security_cfm_cb = pairing_complete_cb; conn->disconn_cfm_cb = pairing_complete_cb; Index: linux-3.5-rc1/net/bluetooth/smp.c =================================================================== --- linux-3.5-rc1.orig/net/bluetooth/smp.c +++ linux-3.5-rc1/net/bluetooth/smp.c @@ -648,7 +648,7 @@ static u8 smp_cmd_pairing_rsp(struct l2c auth |= (req->auth_req | rsp->auth_req) & SMP_AUTH_MITM; - ret = tk_request(conn, 0, auth, rsp->io_capability, req->io_capability); + ret = tk_request(conn, 0, auth, req->io_capability, rsp->io_capability); if (ret) return SMP_UNSPECIFIED; @@ -703,7 +703,7 @@ static u8 smp_cmd_pairing_random(struct return 0; } -static u8 smp_ltk_encrypt(struct l2cap_conn *conn) +static u8 smp_ltk_encrypt(struct l2cap_conn *conn, u8 sec_level) { struct smp_ltk *key; struct hci_conn *hcon = conn->hcon; @@ -712,6 +712,9 @@ static u8 smp_ltk_encrypt(struct l2cap_c if (!key) return 0; + if (sec_level > BT_SECURITY_MEDIUM && !key->authenticated) + return 0; + if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &hcon->flags)) return 1; @@ -732,7 +735,7 @@ static u8 smp_cmd_security_req(struct l2 hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req); - if (smp_ltk_encrypt(conn)) + if (smp_ltk_encrypt(conn, hcon->pending_sec_level)) return 0; if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags)) @@ -771,7 +774,7 @@ int smp_conn_security(struct l2cap_conn return 1; if (hcon->link_mode & HCI_LM_MASTER) - if (smp_ltk_encrypt(conn)) + if (smp_ltk_encrypt(conn, sec_level)) goto done; if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags)) Index: linux-3.5-rc1/net/bridge/br_if.c =================================================================== --- linux-3.5-rc1.orig/net/bridge/br_if.c +++ linux-3.5-rc1/net/bridge/br_if.c @@ -240,6 +240,7 @@ int br_add_bridge(struct net *net, const return -ENOMEM; dev_net_set(dev, net); + dev->rtnl_link_ops = &br_link_ops; res = register_netdev(dev); if (res) Index: linux-3.5-rc1/net/bridge/br_netlink.c =================================================================== --- linux-3.5-rc1.orig/net/bridge/br_netlink.c +++ linux-3.5-rc1/net/bridge/br_netlink.c @@ -208,7 +208,7 @@ static int br_validate(struct nlattr *tb return 0; } -static struct rtnl_link_ops br_link_ops __read_mostly = { +struct rtnl_link_ops br_link_ops __read_mostly = { .kind = "bridge", .priv_size = sizeof(struct net_bridge), .setup = br_dev_setup, Index: linux-3.5-rc1/net/bridge/br_private.h =================================================================== --- linux-3.5-rc1.orig/net/bridge/br_private.h +++ linux-3.5-rc1/net/bridge/br_private.h @@ -549,6 +549,7 @@ extern int (*br_fdb_test_addr_hook)(stru #endif /* br_netlink.c */ +extern struct rtnl_link_ops br_link_ops; extern int br_netlink_init(void); extern void br_netlink_fini(void); extern void br_ifinfo_notify(int event, struct net_bridge_port *port); Index: linux-3.5-rc1/net/caif/caif_dev.c =================================================================== --- linux-3.5-rc1.orig/net/caif/caif_dev.c +++ linux-3.5-rc1/net/caif/caif_dev.c @@ -4,8 +4,7 @@ * Author: Sjur Brendeland/sjur.brandeland@stericsson.com * License terms: GNU General Public License (GPL) version 2 * - * Borrowed heavily from file: pn_dev.c. Thanks to - * Remi Denis-Courmont + * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont * and Sakari Ailus */ Index: linux-3.5-rc1/net/caif/caif_socket.c =================================================================== --- linux-3.5-rc1.orig/net/caif/caif_socket.c +++ linux-3.5-rc1/net/caif/caif_socket.c @@ -220,6 +220,7 @@ static void caif_ctrl_cb(struct cflayer cfsk_hold, cfsk_put); cf_sk->sk.sk_state = CAIF_CONNECTED; set_tx_flow_on(cf_sk); + cf_sk->sk.sk_shutdown = 0; cf_sk->sk.sk_state_change(&cf_sk->sk); break; Index: linux-3.5-rc1/net/can/raw.c =================================================================== --- linux-3.5-rc1.orig/net/can/raw.c +++ linux-3.5-rc1/net/can/raw.c @@ -681,9 +681,6 @@ static int raw_sendmsg(struct kiocb *ioc if (err < 0) goto free_skb; - /* to be able to check the received tx sock reference in raw_rcv() */ - skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF; - skb->dev = dev; skb->sk = sk; Index: linux-3.5-rc1/net/core/dev.c =================================================================== --- linux-3.5-rc1.orig/net/core/dev.c +++ linux-3.5-rc1/net/core/dev.c @@ -2089,25 +2089,6 @@ static int dev_gso_segment(struct sk_buf return 0; } -/* - * Try to orphan skb early, right before transmission by the device. - * We cannot orphan skb if tx timestamp is requested or the sk-reference - * is needed on driver level for other reasons, e.g. see net/can/raw.c - */ -static inline void skb_orphan_try(struct sk_buff *skb) -{ - struct sock *sk = skb->sk; - - if (sk && !skb_shinfo(skb)->tx_flags) { - /* skb_tx_hash() wont be able to get sk. - * We copy sk_hash into skb->rxhash - */ - if (!skb->rxhash) - skb->rxhash = sk->sk_hash; - skb_orphan(skb); - } -} - static bool can_checksum_protocol(netdev_features_t features, __be16 protocol) { return ((features & NETIF_F_GEN_CSUM) || @@ -2193,8 +2174,6 @@ int dev_hard_start_xmit(struct sk_buff * if (!list_empty(&ptype_all)) dev_queue_xmit_nit(skb, dev); - skb_orphan_try(skb); - features = netif_skb_features(skb); if (vlan_tx_tag_present(skb) && @@ -2304,7 +2283,7 @@ u16 __skb_tx_hash(const struct net_devic if (skb->sk && skb->sk->sk_hash) hash = skb->sk->sk_hash; else - hash = (__force u16) skb->protocol ^ skb->rxhash; + hash = (__force u16) skb->protocol; hash = jhash_1word(hash, hashrnd); return (u16) (((u64) hash * qcount) >> 32) + qoffset; Index: linux-3.5-rc1/net/ipv6/ip6_fib.c =================================================================== --- linux-3.5-rc1.orig/net/ipv6/ip6_fib.c +++ linux-3.5-rc1/net/ipv6/ip6_fib.c @@ -1349,8 +1349,8 @@ static int fib6_walk_continue(struct fib if (w->leaf && fn->fn_flags & RTN_RTINFO) { int err; - if (w->count < w->skip) { - w->count++; + if (w->skip) { + w->skip--; continue; } Index: linux-3.5-rc1/net/ipv6/route.c =================================================================== --- linux-3.5-rc1.orig/net/ipv6/route.c +++ linux-3.5-rc1/net/ipv6/route.c @@ -2957,10 +2957,6 @@ static int __net_init ip6_route_net_init net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ; net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40; -#ifdef CONFIG_PROC_FS - proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops); - proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); -#endif net->ipv6.ip6_rt_gc_expire = 30*HZ; ret = 0; @@ -2981,10 +2977,6 @@ out_ip6_dst_ops: static void __net_exit ip6_route_net_exit(struct net *net) { -#ifdef CONFIG_PROC_FS - proc_net_remove(net, "ipv6_route"); - proc_net_remove(net, "rt6_stats"); -#endif kfree(net->ipv6.ip6_null_entry); #ifdef CONFIG_IPV6_MULTIPLE_TABLES kfree(net->ipv6.ip6_prohibit_entry); @@ -2993,11 +2985,33 @@ static void __net_exit ip6_route_net_exi dst_entries_destroy(&net->ipv6.ip6_dst_ops); } +static int __net_init ip6_route_net_init_late(struct net *net) +{ +#ifdef CONFIG_PROC_FS + proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops); + proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); +#endif + return 0; +} + +static void __net_exit ip6_route_net_exit_late(struct net *net) +{ +#ifdef CONFIG_PROC_FS + proc_net_remove(net, "ipv6_route"); + proc_net_remove(net, "rt6_stats"); +#endif +} + static struct pernet_operations ip6_route_net_ops = { .init = ip6_route_net_init, .exit = ip6_route_net_exit, }; +static struct pernet_operations ip6_route_net_late_ops = { + .init = ip6_route_net_init_late, + .exit = ip6_route_net_exit_late, +}; + static struct notifier_block ip6_route_dev_notifier = { .notifier_call = ip6_route_dev_notify, .priority = 0, @@ -3047,19 +3061,25 @@ int __init ip6_route_init(void) if (ret) goto xfrm6_init; + ret = register_pernet_subsys(&ip6_route_net_late_ops); + if (ret) + goto fib6_rules_init; + ret = -ENOBUFS; if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) || __rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) || __rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL)) - goto fib6_rules_init; + goto out_register_late_subsys; ret = register_netdevice_notifier(&ip6_route_dev_notifier); if (ret) - goto fib6_rules_init; + goto out_register_late_subsys; out: return ret; +out_register_late_subsys: + unregister_pernet_subsys(&ip6_route_net_late_ops); fib6_rules_init: fib6_rules_cleanup(); xfrm6_init: @@ -3078,6 +3098,7 @@ out_kmem_cache: void ip6_route_cleanup(void) { unregister_netdevice_notifier(&ip6_route_dev_notifier); + unregister_pernet_subsys(&ip6_route_net_late_ops); fib6_rules_cleanup(); xfrm6_fini(); fib6_gc_cleanup(); Index: linux-3.5-rc1/net/ipv6/tcp_ipv6.c =================================================================== --- linux-3.5-rc1.orig/net/ipv6/tcp_ipv6.c +++ linux-3.5-rc1/net/ipv6/tcp_ipv6.c @@ -1212,7 +1212,8 @@ have_isn: tcp_rsk(req)->snt_isn = isn; tcp_rsk(req)->snt_synack = tcp_time_stamp; - security_inet_conn_request(sk, skb, req); + if (security_inet_conn_request(sk, skb, req)) + goto drop_and_release; if (tcp_v6_send_synack(sk, req, (struct request_values *)&tmp_ext, Index: linux-3.5-rc1/net/iucv/af_iucv.c =================================================================== --- linux-3.5-rc1.orig/net/iucv/af_iucv.c +++ linux-3.5-rc1/net/iucv/af_iucv.c @@ -372,7 +372,6 @@ static int afiucv_hs_send(struct iucv_me skb_trim(skb, skb->dev->mtu); } skb->protocol = ETH_P_AF_IUCV; - skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF; nskb = skb_clone(skb, GFP_ATOMIC); if (!nskb) return -ENOMEM; Index: linux-3.5-rc1/net/l2tp/l2tp_eth.c =================================================================== --- linux-3.5-rc1.orig/net/l2tp/l2tp_eth.c +++ linux-3.5-rc1/net/l2tp/l2tp_eth.c @@ -42,6 +42,11 @@ struct l2tp_eth { struct sock *tunnel_sock; struct l2tp_session *session; struct list_head list; + atomic_long_t tx_bytes; + atomic_long_t tx_packets; + atomic_long_t rx_bytes; + atomic_long_t rx_packets; + atomic_long_t rx_errors; }; /* via l2tp_session_priv() */ @@ -88,24 +93,40 @@ static int l2tp_eth_dev_xmit(struct sk_b struct l2tp_eth *priv = netdev_priv(dev); struct l2tp_session *session = priv->session; + atomic_long_add(skb->len, &priv->tx_bytes); + atomic_long_inc(&priv->tx_packets); + l2tp_xmit_skb(session, skb, session->hdr_len); - dev->stats.tx_bytes += skb->len; - dev->stats.tx_packets++; + return NETDEV_TX_OK; +} - return 0; +static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct l2tp_eth *priv = netdev_priv(dev); + + stats->tx_bytes = atomic_long_read(&priv->tx_bytes); + stats->tx_packets = atomic_long_read(&priv->tx_packets); + stats->rx_bytes = atomic_long_read(&priv->rx_bytes); + stats->rx_packets = atomic_long_read(&priv->rx_packets); + stats->rx_errors = atomic_long_read(&priv->rx_errors); + return stats; } + static struct net_device_ops l2tp_eth_netdev_ops = { .ndo_init = l2tp_eth_dev_init, .ndo_uninit = l2tp_eth_dev_uninit, .ndo_start_xmit = l2tp_eth_dev_xmit, + .ndo_get_stats64 = l2tp_eth_get_stats64, }; static void l2tp_eth_dev_setup(struct net_device *dev) { ether_setup(dev); - dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->features |= NETIF_F_LLTX; dev->netdev_ops = &l2tp_eth_netdev_ops; dev->destructor = free_netdev; } @@ -114,17 +135,17 @@ static void l2tp_eth_dev_recv(struct l2t { struct l2tp_eth_sess *spriv = l2tp_session_priv(session); struct net_device *dev = spriv->dev; + struct l2tp_eth *priv = netdev_priv(dev); if (session->debug & L2TP_MSG_DATA) { unsigned int length; - u8 *ptr = skb->data; length = min(32u, skb->len); if (!pskb_may_pull(skb, length)) goto error; pr_debug("%s: eth recv\n", session->name); - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length); } if (!pskb_may_pull(skb, sizeof(ETH_HLEN))) @@ -139,15 +160,15 @@ static void l2tp_eth_dev_recv(struct l2t nf_reset(skb); if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) { - dev->stats.rx_packets++; - dev->stats.rx_bytes += data_len; - } else - dev->stats.rx_errors++; - + atomic_long_inc(&priv->rx_packets); + atomic_long_add(data_len, &priv->rx_bytes); + } else { + atomic_long_inc(&priv->rx_errors); + } return; error: - dev->stats.rx_errors++; + atomic_long_inc(&priv->rx_errors); kfree_skb(skb); } Index: linux-3.5-rc1/net/mac80211/cfg.c =================================================================== --- linux-3.5-rc1.orig/net/mac80211/cfg.c +++ linux-3.5-rc1/net/mac80211/cfg.c @@ -2093,6 +2093,9 @@ static int ieee80211_set_bitrate_mask(st struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); int i, ret; + if (!ieee80211_sdata_running(sdata)) + return -ENETDOWN; + if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) { ret = drv_set_bitrate_mask(local, sdata, mask); if (ret) Index: linux-3.5-rc1/net/mac80211/mlme.c =================================================================== --- linux-3.5-rc1.orig/net/mac80211/mlme.c +++ linux-3.5-rc1/net/mac80211/mlme.c @@ -1352,6 +1352,8 @@ static void ieee80211_set_disassoc(struc if (WARN_ON(!ifmgd->associated)) return; + ieee80211_stop_poll(sdata); + memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); ifmgd->associated = NULL; @@ -2612,8 +2614,6 @@ static void ieee80211_sta_connection_los struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[DEAUTH_DISASSOC_LEN]; - ieee80211_stop_poll(sdata); - ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, false, frame_buf); mutex_unlock(&ifmgd->mtx); Index: linux-3.5-rc1/net/mac80211/sta_info.h =================================================================== --- linux-3.5-rc1.orig/net/mac80211/sta_info.h +++ linux-3.5-rc1/net/mac80211/sta_info.h @@ -271,6 +271,9 @@ struct sta_ampdu_mlme { * @plink_timer: peer link watch timer * @plink_timer_was_running: used by suspend/resume to restore timers * @t_offset: timing offset relative to this host + * @t_offset_setpoint: reference timing offset of this sta to be used when + * calculating clockdrift + * @ch_type: peer's channel type * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver @@ -278,6 +281,8 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered + * @supports_40mhz: tracks whether the station advertised 40 MHz support + * as we overwrite its HT parameters with the currently used value */ struct sta_info { /* General information, mostly static */ Index: linux-3.5-rc1/net/mac802154/tx.c =================================================================== --- linux-3.5-rc1.orig/net/mac802154/tx.c +++ linux-3.5-rc1/net/mac802154/tx.c @@ -83,9 +83,10 @@ netdev_tx_t mac802154_tx(struct mac80215 { struct xmit_work *work; - if (!(priv->phy->channels_supported[page] & (1 << chan))) + if (!(priv->phy->channels_supported[page] & (1 << chan))) { WARN_ON(1); return NETDEV_TX_OK; + } if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) { u16 crc = crc_ccitt(0, skb->data, skb->len); Index: linux-3.5-rc1/net/phonet/af_phonet.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/af_phonet.c +++ linux-3.5-rc1/net/phonet/af_phonet.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/datagram.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/datagram.c +++ linux-3.5-rc1/net/phonet/datagram.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/pep-gprs.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/pep-gprs.c +++ linux-3.5-rc1/net/phonet/pep-gprs.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/pep.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/pep.c +++ linux-3.5-rc1/net/phonet/pep.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/pn_dev.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/pn_dev.c +++ linux-3.5-rc1/net/phonet/pn_dev.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/pn_netlink.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/pn_netlink.c +++ linux-3.5-rc1/net/phonet/pn_netlink.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Remi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/socket.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/socket.c +++ linux-3.5-rc1/net/phonet/socket.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/phonet/sysctl.c =================================================================== --- linux-3.5-rc1.orig/net/phonet/sysctl.c +++ linux-3.5-rc1/net/phonet/sysctl.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License Index: linux-3.5-rc1/net/sctp/protocol.c =================================================================== --- linux-3.5-rc1.orig/net/sctp/protocol.c +++ linux-3.5-rc1/net/sctp/protocol.c @@ -673,7 +673,9 @@ void sctp_addr_wq_timeout_handler(unsign SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n"); sctp_bh_unlock_sock(sk); } +#if IS_ENABLED(CONFIG_IPV6) free_next: +#endif list_del(&addrw->list); kfree(addrw); } Index: linux-3.5-rc1/net/wireless/reg.c =================================================================== --- linux-3.5-rc1.orig/net/wireless/reg.c +++ linux-3.5-rc1/net/wireless/reg.c @@ -1389,7 +1389,7 @@ static void reg_set_request_processed(vo spin_unlock(®_requests_lock); if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) - cancel_delayed_work_sync(®_timeout); + cancel_delayed_work(®_timeout); if (need_more_processing) schedule_work(®_work); Index: linux-3.5-rc1/net/wireless/util.c =================================================================== --- linux-3.5-rc1.orig/net/wireless/util.c +++ linux-3.5-rc1/net/wireless/util.c @@ -804,7 +804,7 @@ int cfg80211_change_iface(struct cfg8021 ntype == NL80211_IFTYPE_P2P_CLIENT)) return -EBUSY; - if (ntype != otype) { + if (ntype != otype && netif_running(dev)) { err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr, ntype); if (err) Index: linux-3.5-rc1/sound/i2c/other/tea575x-tuner.c =================================================================== --- linux-3.5-rc1.orig/sound/i2c/other/tea575x-tuner.c +++ linux-3.5-rc1/sound/i2c/other/tea575x-tuner.c @@ -37,8 +37,8 @@ MODULE_AUTHOR("Jaroslav Kysela tea5759 ? 760 : 875) * 1600U) +#define FREQ_HI ((tea->tea5759 ? 910 : 1080) * 1600U) /* * definitions @@ -120,9 +120,9 @@ static u32 snd_tea575x_read(struct snd_t return data; } -static u32 snd_tea575x_get_freq(struct snd_tea575x *tea) +static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val) { - u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK; + u32 freq = val & TEA575X_BIT_FREQ_MASK; if (freq == 0) return freq; @@ -139,6 +139,11 @@ static u32 snd_tea575x_get_freq(struct s return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */ } +static u32 snd_tea575x_get_freq(struct snd_tea575x *tea) +{ + return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea)); +} + static void snd_tea575x_set_freq(struct snd_tea575x *tea) { u32 freq = tea->freq; @@ -156,6 +161,7 @@ static void snd_tea575x_set_freq(struct tea->val &= ~TEA575X_BIT_FREQ_MASK; tea->val |= freq & TEA575X_BIT_FREQ_MASK; snd_tea575x_write(tea, tea->val); + tea->freq = snd_tea575x_val_to_freq(tea, tea->val); } /* @@ -317,7 +323,6 @@ static int tea575x_s_ctrl(struct v4l2_ct } static const struct v4l2_file_operations tea575x_fops = { - .owner = THIS_MODULE, .unlocked_ioctl = video_ioctl2, .open = v4l2_fh_open, .release = v4l2_fh_release, @@ -337,7 +342,6 @@ static const struct v4l2_ioctl_ops tea57 }; static const struct video_device tea575x_radio = { - .fops = &tea575x_fops, .ioctl_ops = &tea575x_ioctl_ops, .release = video_device_release_empty, }; @@ -349,7 +353,7 @@ static const struct v4l2_ctrl_ops tea575 /* * initialize all the tea575x chips */ -int snd_tea575x_init(struct snd_tea575x *tea) +int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner) { int retval; @@ -374,6 +378,9 @@ int snd_tea575x_init(struct snd_tea575x tea->vd.lock = &tea->mutex; tea->vd.v4l2_dev = tea->v4l2_dev; tea->vd.ctrl_handler = &tea->ctrl_handler; + tea->fops = tea575x_fops; + tea->fops.owner = owner; + tea->vd.fops = &tea->fops; set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags); /* disable hw_freq_seek if we can't use it */ if (tea->cannot_read_data) Index: linux-3.5-rc1/sound/pci/es1968.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/es1968.c +++ linux-3.5-rc1/sound/pci/es1968.c @@ -2769,7 +2769,7 @@ static int __devinit snd_es1968_create(s chip->tea.ops = &snd_es1968_tea_ops; strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card)); sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); - if (!snd_tea575x_init(&chip->tea)) + if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) printk(KERN_INFO "es1968: detected TEA575x radio\n"); #endif Index: linux-3.5-rc1/sound/pci/fm801.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/fm801.c +++ linux-3.5-rc1/sound/pci/fm801.c @@ -1254,7 +1254,7 @@ static int __devinit snd_fm801_create(st sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 && (tea575x_tuner & TUNER_TYPE_MASK) < 4) { - if (snd_tea575x_init(&chip->tea)) { + if (snd_tea575x_init(&chip->tea, THIS_MODULE)) { snd_printk(KERN_ERR "TEA575x radio not found\n"); snd_fm801_free(chip); return -ENODEV; @@ -1263,7 +1263,7 @@ static int __devinit snd_fm801_create(st /* autodetect tuner connection */ for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) { chip->tea575x_tuner = tea575x_tuner; - if (!snd_tea575x_init(&chip->tea)) { + if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) { snd_printk(KERN_INFO "detected TEA575x radio type %s\n", get_tea575x_gpio(chip)->name); break; Index: linux-3.5-rc1/sound/pci/hda/Kconfig =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/Kconfig +++ linux-3.5-rc1/sound/pci/hda/Kconfig @@ -97,19 +97,6 @@ config SND_HDA_CODEC_REALTEK snd-hda-codec-realtek. This module is automatically loaded at probing. -config SND_HDA_ENABLE_REALTEK_QUIRKS - bool "Build static quirks for Realtek codecs" - depends on SND_HDA_CODEC_REALTEK - default y - help - Say Y here to build the static quirks codes for Realtek codecs. - If you need the "model" preset that the default BIOS auto-parser - can't handle, turn this option on. - - If your device works with model=auto option, basically you don't - need the quirk code. By turning this off, you can reduce the - module size quite a lot. - config SND_HDA_CODEC_ANALOG bool "Build Analog Device HD-audio codec support" default y Index: linux-3.5-rc1/sound/pci/hda/hda_auto_parser.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/hda_auto_parser.c +++ linux-3.5-rc1/sound/pci/hda/hda_auto_parser.c @@ -618,7 +618,6 @@ int snd_hda_gen_add_verbs(struct hda_gen const struct hda_verb *list) { const struct hda_verb **v; - snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8); v = snd_array_new(&spec->verbs); if (!v) return -ENOMEM; Index: linux-3.5-rc1/sound/pci/hda/hda_auto_parser.h =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/hda_auto_parser.h +++ linux-3.5-rc1/sound/pci/hda/hda_auto_parser.h @@ -157,4 +157,14 @@ void snd_hda_pick_fixup(struct hda_codec const struct snd_pci_quirk *quirk, const struct hda_fixup *fixlist); +static inline void snd_hda_gen_init(struct hda_gen_spec *spec) +{ + snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8); +} + +static inline void snd_hda_gen_free(struct hda_gen_spec *spec) +{ + snd_array_free(&spec->verbs); +} + #endif /* __SOUND_HDA_AUTO_PARSER_H */ Index: linux-3.5-rc1/sound/pci/hda/hda_codec.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/hda_codec.c +++ linux-3.5-rc1/sound/pci/hda/hda_codec.c @@ -1184,6 +1184,7 @@ static void snd_hda_codec_free(struct hd { if (!codec) return; + snd_hda_jack_tbl_clear(codec); restore_init_pincfgs(codec); #ifdef CONFIG_SND_HDA_POWER_SAVE cancel_delayed_work(&codec->power_work); @@ -1192,6 +1193,7 @@ static void snd_hda_codec_free(struct hd list_del(&codec->list); snd_array_free(&codec->mixers); snd_array_free(&codec->nids); + snd_array_free(&codec->cvt_setups); snd_array_free(&codec->conn_lists); snd_array_free(&codec->spdif_out); codec->bus->caddr_tbl[codec->addr] = NULL; @@ -2333,6 +2335,8 @@ int snd_hda_codec_reset(struct hda_codec /* free only driver_pins so that init_pins + user_pins are restored */ snd_array_free(&codec->driver_pins); restore_pincfgs(codec); + snd_array_free(&codec->cvt_setups); + snd_array_free(&codec->spdif_out); codec->num_pcms = 0; codec->pcm_info = NULL; codec->preset = NULL; Index: linux-3.5-rc1/sound/pci/hda/patch_conexant.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/patch_conexant.c +++ linux-3.5-rc1/sound/pci/hda/patch_conexant.c @@ -445,8 +445,10 @@ static int conexant_init(struct hda_code static void conexant_free(struct hda_codec *codec) { + struct conexant_spec *spec = codec->spec; + snd_hda_gen_free(&spec->gen); snd_hda_detach_beep_device(codec); - kfree(codec->spec); + kfree(spec); } static const struct snd_kcontrol_new cxt_capture_mixers[] = { @@ -4466,6 +4468,7 @@ static const struct snd_pci_quirk cxt506 SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), {} }; @@ -4497,6 +4500,7 @@ static int patch_conexant_auto(struct hd if (!spec) return -ENOMEM; codec->spec = spec; + snd_hda_gen_init(&spec->gen); switch (codec->vendor_id) { case 0x14f15045: Index: linux-3.5-rc1/sound/pci/hda/patch_realtek.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/patch_realtek.c +++ linux-3.5-rc1/sound/pci/hda/patch_realtek.c @@ -2289,6 +2289,7 @@ static void alc_free(struct hda_codec *c alc_shutup(codec); alc_free_kctls(codec); alc_free_bind_ctls(codec); + snd_hda_gen_free(&spec->gen); kfree(spec); snd_hda_detach_beep_device(codec); } @@ -4253,6 +4254,7 @@ static int alc_alloc_spec(struct hda_cod return -ENOMEM; codec->spec = spec; spec->mixer_nid = mixer_nid; + snd_hda_gen_init(&spec->gen); err = alc_codec_rename_from_preset(codec); if (err < 0) { @@ -6705,6 +6707,12 @@ static int patch_alc662(struct hda_codec alc_fix_pll_init(codec, 0x20, 0x04, 15); + alc_pick_fixup(codec, alc662_fixup_models, + alc662_fixup_tbl, alc662_fixups); + alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); + + alc_auto_parse_customize_define(codec); + if ((alc_get_coef0(codec) & (1 << 14)) && codec->bus->pci->subsystem_vendor == 0x1025 && spec->cdefine.platform_type == 1) { @@ -6712,12 +6720,6 @@ static int patch_alc662(struct hda_codec goto error; } - alc_pick_fixup(codec, alc662_fixup_models, - alc662_fixup_tbl, alc662_fixups); - alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); - - alc_auto_parse_customize_define(codec); - /* automatic parse from the BIOS config */ err = alc662_parse_auto_config(codec); if (err < 0) @@ -6800,6 +6802,7 @@ static const struct hda_codec_preset snd { .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 }, { .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 }, { .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 }, + { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 }, { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", .patch = patch_alc861 }, { .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd }, Index: linux-3.5-rc1/sound/pci/hda/patch_sigmatel.c =================================================================== --- linux-3.5-rc1.orig/sound/pci/hda/patch_sigmatel.c +++ linux-3.5-rc1/sound/pci/hda/patch_sigmatel.c @@ -4367,7 +4367,7 @@ static int stac92xx_init(struct hda_code AC_PINCTL_IN_EN); for (i = 0; i < spec->num_pwrs; i++) { hda_nid_t nid = spec->pwr_nids[i]; - int pinctl, def_conf; + unsigned int pinctl, def_conf; def_conf = snd_hda_codec_get_pincfg(codec, nid); def_conf = get_defcfg_connect(def_conf); @@ -4376,6 +4376,11 @@ static int stac92xx_init(struct hda_code stac_toggle_power_map(codec, nid, 0); continue; } + if (def_conf == AC_JACK_PORT_FIXED) { + /* no need for jack detection for fixed pins */ + stac_toggle_power_map(codec, nid, 1); + continue; + } /* power on when no jack detection is available */ /* or when the VREF is used for controlling LED */ if (!spec->hp_detect || Index: linux-3.5-rc1/sound/soc/codecs/wm8994.c =================================================================== --- linux-3.5-rc1.orig/sound/soc/codecs/wm8994.c +++ linux-3.5-rc1/sound/soc/codecs/wm8994.c @@ -727,9 +727,6 @@ static void wm1811_jackdet_set_mode(stru if (!wm8994->jackdet || !wm8994->jack_cb) return; - if (!wm8994->jackdet || !wm8994->jack_cb) - return; - if (wm8994->active_refcount) mode = WM1811_JACKDET_MODE_AUDIO; Index: linux-3.5-rc1/sound/usb/mixer_maps.c =================================================================== --- linux-3.5-rc1.orig/sound/usb/mixer_maps.c +++ linux-3.5-rc1/sound/usb/mixer_maps.c @@ -341,6 +341,14 @@ static struct usbmix_ctl_map usbmix_ctl_ .map = audigy2nx_map, .selector_map = audigy2nx_selectors, }, + { /* Logitech, Inc. QuickCam Pro for Notebooks */ + .id = USB_ID(0x046d, 0x0991), + .ignore_ctl_error = 1, + }, + { /* Logitech, Inc. QuickCam E 3500 */ + .id = USB_ID(0x046d, 0x09a4), + .ignore_ctl_error = 1, + }, { /* Hercules DJ Console (Windows Edition) */ .id = USB_ID(0x06f8, 0xb000), Index: linux-3.5-rc1/sound/usb/quirks-table.h =================================================================== --- linux-3.5-rc1.orig/sound/usb/quirks-table.h +++ linux-3.5-rc1/sound/usb/quirks-table.h @@ -1831,6 +1831,36 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + USB_DEVICE(0x0582, 0x014d), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + /* .vendor_name = "BOSS", */ + /* .product_name = "GT-100", */ + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 3, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, /* Guillemot devices */ {