[ 0.000000] Linux version 6.1.0-rc1 (root@phoebe) (hppa64-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #3 SMP Thu Oct 20 13:03:56 CEST 2022 [ 0.000000] FP[0] enabled: Rev 1 Model 20 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages disabled. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] PAT: Running on cell 0 and location 1. [ 0.000000] PAT: legacy revision 0x24, pat_rev 0x201, pdc_cap 0x132, S-PTLB 0, HPMC_RENDEZ 0. [ 0.000000] model 000089b0 00000491 00000000 00000002 56bbf1abce93405d 100000f0 00000008 000000b2 000000b2 [ 0.000000] vers 00000401 [ 0.000000] CPUID vers 20 rev 10 (0x0000028a) [ 0.000000] capabilities 0x35 [ 0.000000] model 9000/785/C8000 [ 0.000000] product n/a, original product AB629A, S/N: SG51828565 [ 0.000000] parisc_cache_init: Only equivalent aliasing supported! [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB [ 0.000000] 1) Start 0x0000000100000000 End 0x00000001bfdfffff Size 3070 MB [ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB [ 0.000000] Total Memory: 7166 MB [ 0.000000] PDT: type PDT_PAT_NEW, size 3000, entries 0, status 0, dbe_loc 0xffffffffffffffff, good_mem 0 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x00040fffffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfdfffff] [ 0.000000] node 0: [mem 0x0000004040000000-0x00000040ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000040ffffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] percpu: Embedded 18 pages/cpu s35696 r8192 d29840 u73728 [ 0.000000] pcpu-alloc: s35696 r8192 d29840 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1809415 [ 0.000000] Kernel command line: root=/dev/sda5 console=ttyS0 HOME=/ panic=1 panic_on_oops=1 palo_kernel=2/vmlinux-6.1.0-rc1 earlycon=pdc [ 0.000000] earlycon: pdc0 at MMIO32be 0x0000000000000000 (options '') [ 0.000000] printk: bootconsole [pdc0] enabled [ 0.000000] Unknown kernel command line parameters "panic_on_oops=1 palo_kernel=2/vmlinux-6.1.0-rc1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 7192280K/7337984K available (5865K kernel code, 8668K rwdata, 1019K rodata, 382K init, 2464K bss, 145704K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] NR_IRQS: 80 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000002] sched_clock: 64 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns [ 0.108100] Console: colour dummy device 160x64 [ 0.168534] Calibrating delay loop... 1991.60 BogoMIPS (lpj=3317760) [ 0.271839] pid_max: default: 32768 minimum: 301 [ 0.332108] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.435315] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.543092] cblist_init_generic: Setting adjustable number of callback queues. [ 0.638509] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.718598] TOC handler registered [ 0.765276] rcu: Hierarchical SRCU implementation. [ 0.828508] rcu: Max phase no-delay instances is 1000. [ 0.898940] smp: Bringing up secondary CPUs ... [ 0.958510] smp: Brought up 1 node, 1 CPU [ 1.012380] devtmpfs: initialized [ 1.059361] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.188525] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.281948] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.358739] Searching for devices... [ 1.521840] Found devices: [ 1.555176] 1. Crestone Peak Mako+ Slow [128] at 0xfffffffffe780000 [128] { 0, 0x0, 0x89b, 0x00004 } [ 1.678509] 2. Crestone Peak Mako+ Slow [129] at 0xfffffffffe781000 [129] { 0, 0x0, 0x89b, 0x00004 } [ 1.798508] 3. Crestone Peak Mako+ Slow [152] at 0xfffffffffe798000 [152] { 0, 0x0, 0x89b, 0x00004 } [ 1.921841] 4. Crestone Peak Mako+ Slow [153] at 0xfffffffffe799000 [153] { 0, 0x0, 0x89b, 0x00004 } [ 2.041841] 5. Memory [8] at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009 } [ 2.138508] 6. Pluto BC McKinley Port [0] at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c } [ 2.255175] 7. Mercury PCI Bridge [0:0] at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a } [ 2.371843] 8. Mercury PCI Bridge [0:2] at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a } [ 2.488518] 9. Mercury PCI Bridge [0:3] at 0xfffffffffed26000 [0/3] { 13, 0x0, 0x783, 0x0000a } [ 2.605176] 10. Quicksilver AGP Bridge [0:4] at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x784, 0x0000a } [ 2.725175] 11. BMC IPMI Mgmt Ctlr [16] at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 } [ 2.841842] 12. Crestone Peak Core RS-232 [17] at 0xfffffff0f05e0000 [17] { 10, 0x0, 0x076, 0x000ad } [ 2.961842] 13. Crestone Peak Core RS-232 [18] at 0xfffffff0f05e2000 [18] { 10, 0x0, 0x076, 0x000ad } [ 3.475175] Logical CPU #0 is physical cpu #0 at location 0xffff0000ffff15 with hpa 0xfffffffffe780000 [ 3.598579] CPU0: cpu core 0 of socket 0 [ 3.658506] Logical CPU #1 is physical cpu #1 at location 0xffff0000ffff15 with hpa 0xfffffffffe781000 [ 3.781862] CPU1: cpu core 1 of socket 0 [ 3.835734] Releasing cpu 1 now, hpa=fffffffffe781000 [ 3.965173] Logical CPU #2 is physical cpu #2 at location 0xffff0001ffff15 with hpa 0xfffffffffe798000 [ 4.088549] CPU2: cpu core 0 of socket 1 [ 4.142607] Releasing cpu 2 now, hpa=fffffffffe798000 [ 4.278508] Logical CPU #3 is physical cpu #3 at location 0xffff0001ffff15 with hpa 0xfffffffffe799000 [ 4.401955] CPU3: cpu core 1 of socket 1 [ 4.457092] Releasing cpu 3 now, hpa=fffffffffe799000 [ 4.599081] CPU(s): 4 out of 4 PA8900 (Shortfin) at 1000.000000 MHz online [ 4.728630] alternatives: applied 55 out of 2116 patches [ 4.848155] Whole cache flush 5292493 cycles, flushing 18628608 bytes 7754470 cycles [ 4.848210] Calculated flush threshold is 12416 KiB [ 4.915201] Cache flush threshold set to 262144 KiB [ 4.981015] Whole TLB flush 20091 cycles, Range flush 18628608 bytes 2469793 cycles [ 5.085203] Calculated TLB flush threshold 592 KiB [ 5.148523] TLB flush threshold set to 592 KiB [ 5.368589] SBA found Pluto 2.3 at 0xfffffffffed00000 [ 5.808550] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000 [ 5.941852] LBA: lmmio_space [0xffffffff80000000-0xffffffff9fffffff] - new [ 6.078793] LBA 0:0: PCI host bridge to bus 0000:00 [ 6.145201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 6.228523] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff9fffffff] (bus address [0x80000000-0x9fffffff]) [ 6.381907] pci_bus 0000:00: root bus resource [bus 00-07] [ 6.455189] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000 [ 6.672137] LBA 0:2: PCI host bridge to bus 0000:40 [ 6.738536] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 6.858522] pci_bus 0000:40: root bus resource [mem 0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff]) [ 7.011857] pci_bus 0000:40: root bus resource [bus 40-47] [ 7.085254] pci 0000:40:01.0: [1000:0030] type 00 class 0x010000 [ 7.165223] pci 0000:40:01.0: reg 0x10: [io 0x14200-0x142ff] [ 7.241876] pci 0000:40:01.0: reg 0x14: [mem 0xffffffffa0300000-0xffffffffa031ffff 64bit] [ 7.351902] pci 0000:40:01.0: reg 0x1c: [mem 0xffffffffa02e0000-0xffffffffa02fffff 64bit] [ 7.461886] pci 0000:40:01.0: reg 0x30: [mem 0xffffffffa0100000-0xffffffffa01fffff pref] [ 7.569817] pci 0000:40:01.0: supports D1 D2 [ 7.625569] pci 0000:40:01.1: [1000:0030] type 00 class 0x010000 [ 7.705221] pci 0000:40:01.1: reg 0x10: [io 0x14100-0x141ff] [ 7.781879] pci 0000:40:01.1: reg 0x14: [mem 0xffffffffa02c0000-0xffffffffa02dffff 64bit] [ 7.891873] pci 0000:40:01.1: reg 0x1c: [mem 0xffffffffa02a0000-0xffffffffa02bffff 64bit] [ 8.001880] pci 0000:40:01.1: reg 0x30: [mem 0xffffffffa0000000-0xffffffffa00fffff pref] [ 8.108593] pci 0000:40:01.1: supports D1 D2 [ 8.165407] pci 0000:40:02.0: [1095:3114] type 00 class 0x010400 [ 8.245216] pci 0000:40:02.0: reg 0x10: [io 0x14398-0x1439f] [ 8.321866] pci 0000:40:02.0: reg 0x14: [io 0x143a4-0x143a7] [ 8.398550] pci 0000:40:02.0: reg 0x18: [io 0x14390-0x14397] [ 8.475200] pci 0000:40:02.0: reg 0x1c: [io 0x143a0-0x143a3] [ 8.551867] pci 0000:40:02.0: reg 0x20: [io 0x14380-0x1438f] [ 8.628534] pci 0000:40:02.0: reg 0x24: [mem 0xffffffffa0329000-0xffffffffa03293ff] [ 8.731867] pci 0000:40:02.0: reg 0x30: [mem 0xffffffffa0200000-0xffffffffa027ffff pref] [ 8.838564] pci 0000:40:02.0: supports D1 D2 [ 8.897323] pci 0000:40:03.0: [105a:3d73] type 00 class 0x018000 [ 8.975219] pci 0000:40:03.0: reg 0x10: [io 0x14300-0x1437f] [ 9.051881] pci 0000:40:03.0: reg 0x18: [io 0x14000-0x140ff] [ 9.128535] pci 0000:40:03.0: reg 0x1c: [mem 0xffffffffa0328000-0xffffffffa0328fff] [ 9.231868] pci 0000:40:03.0: reg 0x20: [mem 0xffffffffa0280000-0xffffffffa029ffff] [ 9.335212] pci 0000:40:03.0: reg 0x30: [mem 0xffffffffa0320000-0xffffffffa0327fff pref] [ 9.441911] pci 0000:40:03.0: supports D1 [ 9.531884] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000 [ 9.712150] LBA 0:3: PCI host bridge to bus 0000:60 [ 9.778530] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 9.898524] pci_bus 0000:60: root bus resource [mem 0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff]) [ 10.051872] pci_bus 0000:60: root bus resource [bus 60-67] [ 10.125248] pci 0000:60:01.0: [1033:0035] type 00 class 0x0c0310 [ 10.205228] pci 0000:60:01.0: reg 0x10: [mem 0xffffffffb00a3000-0xffffffffb00a3fff] [ 10.308690] pci 0000:60:01.0: supports D1 D2 [ 10.365200] pci 0000:60:01.0: PME# supported from D0 D1 D2 D3hot [ 10.446378] pci 0000:60:01.1: [1033:0035] type 00 class 0x0c0310 [ 10.525230] pci 0000:60:01.1: reg 0x10: [mem 0xffffffffb00a2000-0xffffffffb00a2fff] [ 10.628666] pci 0000:60:01.1: supports D1 D2 [ 10.685183] pci 0000:60:01.1: PME# supported from D0 D1 D2 D3hot [ 10.765382] pci 0000:60:01.2: [1033:00e0] type 00 class 0x0c0320 [ 10.845222] pci 0000:60:01.2: reg 0x10: [mem 0xffffffffb00a1000-0xffffffffb00a10ff] [ 10.945339] pci 0000:60:01.2: supports D1 D2 [ 11.005179] pci 0000:60:01.2: PME# supported from D0 D1 D2 D3hot [ 11.085283] pci 0000:60:02.0: [1095:0680] type 00 class 0x010185 [ 11.165222] pci 0000:60:02.0: reg 0x10: [io 0x26158-0x2615f] [ 11.241872] pci 0000:60:02.0: reg 0x14: [io 0x26164-0x26167] [ 11.318538] pci 0000:60:02.0: reg 0x18: [io 0x26150-0x26157] [ 11.395216] pci 0000:60:02.0: reg 0x1c: [io 0x26160-0x26163] [ 11.471872] pci 0000:60:02.0: reg 0x20: [io 0x26140-0x2614f] [ 11.548540] pci 0000:60:02.0: reg 0x24: [mem 0xffffffffb00a0000-0xffffffffb00a00ff] [ 11.648538] pci 0000:60:02.0: reg 0x30: [mem 0xffffffffb0000000-0xffffffffb007ffff pref] [ 11.758579] pci 0000:60:02.0: supports D1 D2 [ 11.816028] pci 0000:60:03.0: [8086:100e] type 00 class 0x020000 [ 11.895225] pci 0000:60:03.0: reg 0x10: [mem 0xffffffffb0080000-0xffffffffb009ffff] [ 11.995221] pci 0000:60:03.0: reg 0x18: [io 0x26100-0x2613f] [ 12.071997] pci 0000:60:03.0: PME# supported from D0 D3hot D3cold [ 12.155405] pci 0000:60:05.0: [13f6:0111] type 00 class 0x040100 [ 12.235224] pci 0000:60:05.0: reg 0x10: [io 0x26000-0x260ff] [ 12.312007] pci 0000:60:05.0: supports D1 D2 [ 12.405213] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000 [ 12.545190] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] - new [ 12.682119] LBA 0:4: PCI host bridge to bus 0000:80 [ 12.748542] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff]) [ 12.868526] pci_bus 0000:80: root bus resource [mem 0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff]) [ 13.021881] pci_bus 0000:80: root bus resource [bus 80-87] [ 13.171850] powersw: Soft power switch at 0xfffffff0f042e278 enabled. [ 13.264718] SCSI subsystem initialized [ 13.315138] libata version 3.00 loaded. [ 13.315765] vgaarb: loaded [ 13.351847] VFS: Disk quotas dquot_6.6.0 [ 13.401890] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 13.500356] NET: Registered PF_INET protocol family [ 13.566317] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 13.676864] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 13.788623] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 13.894092] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 13.999368] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 14.100909] TCP: Hash tables configured (established 65536 bind 65536) [ 14.188750] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 14.278650] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 14.375513] PCI: CLS 16 bytes [ 14.488562] pci 0000:60:01.0: quirk_usb_early_handoff+0x0/0x948 took 71614 usecs [ 14.625250] pci 0000:60:01.1: quirk_usb_early_handoff+0x0/0x948 took 71614 usecs [ 14.798572] pci 0000:60:01.2: quirk_usb_early_handoff+0x0/0x948 took 71614 usecs [ 14.932038] clocksource: cr16_unstable: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 15.080026] Performance monitoring counters enabled for Crestone Peak Mako+ Slow [128] [ 15.185982] workingset: timestamp_bits=62 max_order=21 bucket_order=0 [ 15.276344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 15.375569] sticore: STI GSC/PCI core graphics driver Version 0.9c [ 15.458176] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 15.543630] sata_promise 0000:40:03.0: version 2.12 [ 15.579564] scsi host0: sata_promise [ 15.629974] scsi host1: sata_promise [ 15.677886] scsi host2: sata_promise [ 15.725282] ata1: SATA max UDMA/133 mmio m4096@0xffffffffa0328000 ata 0xffffffffa0328200 irq 21 [ 15.838520] ata2: SATA max UDMA/133 mmio m4096@0xffffffffa0328000 ata 0xffffffffa0328280 irq 21 [ 15.955181] ata3: PATA max UDMA/133 mmio m4096@0xffffffffa0328000 ata 0xffffffffa0328300 irq 21 [ 16.071982] sata_sil 0000:40:02.0: version 2.4 [ 16.108570] sata_sil 0000:40:02.0: Applying R_ERR on DMA activate FIS errata fix [ 16.210508] scsi host3: sata_sil [ 16.253817] scsi host4: sata_sil [ 16.297458] scsi host5: sata_sil [ 16.340475] scsi host6: sata_sil [ 16.381948] ata4: SATA max UDMA/100 mmio m1024@0xffffffffa0329000 tf 0xffffffffa0329080 irq 20 [ 16.498524] ata5: SATA max UDMA/100 mmio m1024@0xffffffffa0329000 tf 0xffffffffa03290c0 irq 20 [ 16.581891] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 16.611849] ata6: SATA max UDMA/100 mmio m1024@0xffffffffa0329000 tf 0xffffffffa0329280 irq 20 [ 16.611857] ata7: SATA max UDMA/100 mmio m1024@0xffffffffa0329000 tf 0xffffffffa03292c0 irq 20 [ 16.701662] ata1.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133 [ 16.808640] Fusion MPT base driver 3.04.20 [ 16.925188] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 17.008514] Copyright (c) 1999-2008 LSI Corporation [ 17.008545] Fusion MPT SPI Host driver 3.04.20 [ 17.068316] ata1.00: configured for UDMA/133 [ 17.125187] ata4: SATA link down (SStatus 0 SControl 310) [ 17.230667] mptbase: ioc0: Initiating bringup [ 17.290520] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5 [ 17.585967] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB) [ 17.685827] sd 0:0:0:0: [sda] Write Protect is off [ 17.748522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.748591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.868609] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 17.901859] ata2: SATA link down (SStatus 0 SControl 300) [ 18.038740] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 18.138784] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.301856] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} [ 18.508523] ata5: SATA link down (SStatus 0 SControl 310) [ 18.895187] ata6: SATA link down (SStatus 0 SControl 310) [ 19.057366] scsi host7: ioc0: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=18 [ 19.281853] ata7: SATA link down (SStatus 0 SControl 310) [ 23.618922] mptbase: ioc1: Initiating bringup [ 24.095199] random: crng init done [ 24.285185] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} [ 24.973964] scsi host8: ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=19 [ 25.747208] scsi 8:0:0:0: Direct-Access SEAGATE ST373455LC 1555 PQ: 0 ANSI: 3 [ 25.855252] scsi target8:0:0: Beginning Domain Validation [ 25.991153] scsi 8:0:0:0: Power-on or device reset occurred [ 26.068245] scsi target8:0:0: Ending Domain Validation [ 26.137013] scsi target8:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 26.268035] sd 8:0:0:0: [sdb] 143374744 512-byte logical blocks: (73.4 GB/68.4 GiB) [ 26.519178] sd 8:0:0:0: [sdb] Write Protect is off [ 26.581858] sd 8:0:0:0: [sdb] Mode Sense: ab 00 10 08 [ 26.771304] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 28.158537] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > [ 28.258804] sd 8:0:0:0: [sdb] Attached SCSI disk [ 30.256501] rtc-generic rtc-generic: registered as rtc0 [ 30.331860] rtc-generic rtc-generic: setting system clock to 2022-10-20T11:06:50 UTC (1666264010) [ 30.452583] Warning: unable to open an initial console. [ 30.741904] VFS: Mounted root (spadfs filesystem) readonly on device 8:5. [ 30.836139] devtmpfs: mounted [ 30.876091] Freeing unused kernel image (initmem) memory: 212K [ 30.951857] Write protected read-only-after-init data: 45k [ 31.025194] Run /sbin/init as init process [ 31.081841] with arguments: [ 31.081846] /sbin/init [ 31.081852] with environment: [ 31.081857] HOME=/ [ 31.081863] TERM=linux [ 31.081868] panic_on_oops=1 [ 31.081874] palo_kernel=2/vmlinux-6.1.0-rc1 [ 31.114477] process 'usr/lib/systemd/systemd' started with executable stack [ 31.545638] systemd[1]: Inserted module 'autofs4' [ 31.787375] ipv6 alternatives: applied 0 out of 151 patches [ 31.899117] NET: Registered PF_INET6 protocol family [ 31.967680] Segment Routing with IPv6 [ 32.015199] In-situ OAM (IOAM) with IPv6 [ 32.223376] unix alternatives: applied 0 out of 26 patches [ 32.332069] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 32.408765] systemd[1]: Inserted module 'unix' [ 32.536714] systemd[1]: systemd 251.6-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 32.961882] systemd[1]: Detected architecture parisc64. [ 33.973599] systemd[1]: Queued start job for default target Graphical Interface. [ 34.076021] systemd[1]: Created slice Slice /system/getty. [ 34.149813] systemd[1]: Created slice Slice /system/modprobe. [ 34.226333] systemd[1]: Created slice Slice /system/systemd-fsck. [ 34.309104] systemd[1]: Created slice User and Session Slice. [ 34.385546] systemd[1]: Started ntpsec-systemd-netif.path. [ 34.458871] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 34.565497] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 34.665643] systemd[1]: Arbitrary Executable File Formats File System Automount Point was skipped because of a failed condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). [ 34.882129] systemd[1]: Reached target Local Encrypted Volumes. [ 34.962122] systemd[1]: Reached target Local Integrity Protected Volumes. [ 35.052266] systemd[1]: Reached target Path Units. [ 35.115499] systemd[1]: Reached target Slice Units. [ 35.182200] systemd[1]: Reached target Local Verity Protected Volumes. [ 35.268959] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 35.355365] systemd[1]: lvm2-lvmpolld.socket: Socket service lvm2-lvmpolld.service not loaded, refusing. [ 35.481897] systemd[1]: Failed to listen on LVM2 poll daemon socket. [ 35.573921] systemd[1]: Listening on Syslog Socket. [ 35.639040] systemd[1]: Listening on fsck to fsckd communication Socket. [ 35.728850] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 35.828108] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). [ 35.972431] systemd[1]: Listening on Journal Socket (/dev/log). [ 36.052129] systemd[1]: Listening on Journal Socket. [ 36.122948] systemd[1]: Listening on udev Control Socket. [ 36.195485] systemd[1]: Listening on udev Kernel Socket. [ 36.265870] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 36.452251] systemd[1]: Mounting POSIX Message Queue File System... [ 36.536072] systemd[1]: Kernel Debug File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/debug). [ 36.702015] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 36.878347] systemd[1]: Starting Wait for network to be configured by ifupdown... [ 36.987597] systemd[1]: Starting Set the console keyboard layout... [ 37.082098] systemd[1]: Starting Create List of Static Device Nodes... [ 37.181312] systemd[1]: Starting Load Kernel Module configfs... [ 37.311079] systemd[1]: Starting Load Kernel Module drm... [ 37.471283] systemd[1]: Starting Load Kernel Module fuse... [ 37.705920] systemd[1]: Starting File System Check on Root Device... [ 37.829417] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 38.001981] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 38.216466] fuse alternatives: applied 0 out of 27 patches [ 38.365370] fuse: init (API version 7.37) [ 38.366683] systemd[1]: Starting Journal Service... [ 38.592216] systemd[1]: Starting Load Kernel Modules... [ 38.708722] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. [ 38.946339] ipmi_msghandler alternatives: applied 0 out of 21 patches [ 39.108675] IPMI message handler: version 39.2 [ 39.355320] ipmi device interface [ 39.359550] systemd[1]: Starting Coldplug All udev Devices... [ 39.627745] ipmi_si alternatives: applied 0 out of 8 patches [ 39.633542] systemd[1]: Started Journal Service. [ 39.768469] ipmi_si: IPMI System Interface driver [ 39.768469] ipmi_si: Adding device-tree-specified kcs state machine [ 39.768469] ipmi_si: Trying device-tree-specified kcs state machine at mem address 0xfffffff0f05b0000, slave address 0x0, irq 0 [ 40.746077] systemd-journald[115]: Received client request to flush runtime journal. [ 40.974549] ipmi 16: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x8201, dev_id: 0x32) [ 41.102046] ipmi 16: IPMI kcs interface initialized [ 41.358617] mousedev: PS/2 mouse device common for all mice [ 42.085809] pata_sil680 0000:60:02.0: version 0.4.9 [ 42.085935] pata_sil680 0000:60:02.0: sil680: 133MHz clock. [ 42.652201] scsi host9: pata_sil680 [ 43.008986] scsi host10: pata_sil680 [ 43.185676] ata8: PATA max UDMA/133 cmd 0x26158 ctl 0x26164 bmdma 0x26140 irq 25 [ 43.418580] ata9: PATA max UDMA/133 cmd 0x26150 ctl 0x26160 bmdma 0x26148 irq 25 [ 43.825455] e1000 alternatives: applied 0 out of 573 patches [ 43.915288] usbcore alternatives: applied 0 out of 18 patches [ 44.033004] e1000: Intel(R) PRO/1000 Network Driver [ 44.033027] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 44.312311] usbcore: registered new interface driver usbfs [ 44.385317] usbcore: registered new interface driver hub [ 44.495970] usbcore: registered new device driver usb [ 45.662681] e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:11:0a:31:4b:8b [ 45.755506] e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 47.422259] ata8.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0B26, max UDMA/44 [ 47.513491] ata8.01: ATA-5: IC35L040AVVA07-0, VA2OA52A, max UDMA/100 [ 47.595184] ata8.01: 80418240 sectors, multi 0: LBA [ 47.769592] scsi 9:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0B26 PQ: 0 ANSI: 5 [ 47.897303] Adding 4241124k swap on /dev/sda7. Priority:-2 extents:1 across:4241124k SSDs [ 48.141405] scsi 9:0:1:0: Direct-Access ATA IC35L040AVVA07-0 A52A PQ: 0 ANSI: 5 [ 48.250610] sd 9:0:1:0: [sdc] 80418240 512-byte logical blocks: (41.2 GB/38.3 GiB) [ 48.348621] sd 9:0:1:0: [sdc] Write Protect is off [ 48.415231] sd 9:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 48.415390] sd 9:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 48.535279] sd 9:0:1:0: [sdc] Preferred minimum I/O size 512 bytes [ 48.709068] sd 9:0:1:0: [sdc] Attached SCSI disk [ 49.481894] ehci_hcd alternatives: applied 0 out of 116 patches [ 50.019485] ehci_pci alternatives: applied 0 out of 2 patches [ 50.037584] ext2 alternatives: applied 0 out of 12 patches [ 50.133987] e1000 0000:60:03.0 enp96s3: renamed from eth0 [ 50.256387] ehci-pci 0000:60:01.2: EHCI Host Controller [ 50.256459] ehci-pci 0000:60:01.2: new USB bus registered, assigned bus number 1 [ 50.256610] ehci-pci 0000:60:01.2: irq 24, io mem 0xffffffffb00a1000 [ 50.268528] ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95 [ 50.273599] hub 1-0:1.0: USB hub found [ 50.589749] ohci_hcd alternatives: applied 0 out of 134 patches [ 51.036748] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 51.085205] hub 1-0:1.0: 5 ports detected [ 51.976831] ohci-pci 0000:60:01.0: OHCI PCI host controller [ 52.051834] ohci-pci 0000:60:01.0: new USB bus registered, assigned bus number 2 [ 52.148673] ohci-pci 0000:60:01.0: irq 22, io mem 0xffffffffb00a3000 [ 52.802381] hub 2-0:1.0: USB hub found [ 52.851951] hub 2-0:1.0: 3 ports detected [ 52.906623] ohci-pci 0000:60:01.1: OHCI PCI host controller [ 53.018678] ohci-pci 0000:60:01.1: new USB bus registered, assigned bus number 3 [ 53.117150] ohci-pci 0000:60:01.1: irq 23, io mem 0xffffffffb00a2000 [ 53.730589] e1000: enp96s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 53.848428] hub 3-0:1.0: USB hub found [ 53.900787] hub 3-0:1.0: 2 ports detected [ 54.038773] IPv6: ADDRCONF(NETDEV_CHANGE): enp96s3: link becomes ready [ 54.416957] af_packet alternatives: applied 0 out of 15 patches [ 54.555434] NET: Registered PF_PACKET protocol family [ 56.032045] Loading iSCSI transport class v2.0-870.