From 55216bfa4da5bb9e293087c8a6c2c78234ccb113 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Tue, 8 Apr 2008 10:47:54 -0400 Subject: [PATCH] Two fixes from Broadcom are included in this patch: This patch from upstream: commit 2572c149a2f52232ce690ddb9c6fd0c90ffd61cd Author: Eliezer Tamir Date: Sun Mar 23 03:07:45 2008 -0700 BNX2X: prevent ethtool from setting port type On 10GBaseT boards setting the type to TP will cause the driver to try to configure 1GBaseT. Since there are currently no boards that support setting of the port type, disable this for now. And a patch recently discovered that fixes the naming of one of the reset registers. --- drivers/net/bnx2x.c | 38 +++----------------------------------- 1 files changed, 3 insertions(+), 35 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 192f229..8971bc6 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -63,8 +63,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.40.22" -#define DRV_MODULE_RELDATE "2007/11/27" +#define DRV_MODULE_VERSION "1.42.3" +#define DRV_MODULE_RELDATE "2008/3/9" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ @@ -6156,7 +6156,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) func, mode); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc); bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END); @@ -8003,38 +8003,6 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver, cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt); - switch (cmd->port) { - case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) { - DP(NETIF_MSG_LINK, "TP not supported\n"); - return -EINVAL; - } - - if (bp->phy_flags & PHY_XGXS_FLAG) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_1G); - bnx2x_phy_deassert(bp); - } - break; - - case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) { - DP(NETIF_MSG_LINK, "FIBRE not supported\n"); - return -EINVAL; - } - - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_10G); - bnx2x_phy_deassert(bp); - } - break; - - default: - DP(NETIF_MSG_LINK, "Unknown port type\n"); - return -EINVAL; - } - if (cmd->autoneg == AUTONEG_ENABLE) { if (!(bp->supported & SUPPORTED_Autoneg)) { DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); -- 1.5.2.1